Blog

2021 Genesis G70 pulls some camo back, reveals G80 and G90 design cues

The Genesis G70 may still feel like a new car, but a big refresh is going to drop anytime now. One of our spy photographers just gave us an up-close and fairly detailed look at what this update will consist of visually. Those new lights are lifted straight from the new G90 and G80. It’s a twin-headlight design, consisting of two light fixtures stacked on top of each other with a small gap in the middle. The look is luxurious and classy, but itÂ’s also giving Genesis a uniform face across all of its models. These latest shots also allow us our best look yet at the redesigned front grille. ItÂ’s shaped like the G80 and G90, but the maw doesnÂ’t appear to stretch as wide and tall as those massive front pieces do. Instead of extending downward into the lower part of the front end, this one ends in a V shape in what looks to be another lower front air inlet. Just like the current G70, this one is sporting some sculpting on the sides of the bumper where the fog lights are placed. The model spied here appears to be on the sportier side of the spectrum. ItÂ’s rocking the big, red Brembo brakes and what appear to be Michelin Pilot Sport 4S summer tires. Those 19-inch wheels look like a sport design, and the dual exhaust also suggests this is the twin-turbo V6, not the turbo four-cylinder. Genesis is rumored to be upgrading the G70Â’s V6 engine to a 3.5-liter twin-turbo V6 from the 3.3-liter displacement it has now. The four-cylinder is also said to be getting a big boost, taking from the extra power the Sonata N-LineÂ’s four-cylinder will produce. In addition to those big, oval tailpipes in back, we can also clearly see the twin-taillight design poking through the camouflage. Thin LED strips are visible — we imagine itÂ’ll mimic what we see on the front of the car to create a sense of uniformity in design. Even with all the camo, this G70 is undeniably sporty and luxurious at the same time. WeÂ’re looking forward to seeing the rest of the coverings pulled off, which shouldnÂ’t be long if Genesis intends to make this a 2021 model year car. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery 2021 Genesis G70 spied View 21 Photos Spy Photos Genesis Luxury Sedan

Italy reportedly guarantees $7.1 billion loan to Fiat Chrysler

ROME — Italy has approved a decree offering state guarantees for a 6.3-billion euro ($7.1 billion) loan to Fiat Chrysler's (FCA)  Italian unit, a source said, paving the way for the largest crisis loan to a European carmaker. The source said Italy's audit court had signed off on the decree, in a final step of what had been a lengthy and contested process to get the loan approved. The court's approval follows an earlier endorsement by the economy ministry. "The audit court authorized the decree," said a source close to the matter, asking not to be named because of its sensitivity. FCA's Italian division has tapped Rome's COVID-19 emergency financing schemes to secure a state-backed, three-year facility to help the group's operations in the country, as well as Italy's car sector in which about 10,000 businesses operate, weather the crisis triggered by the coronavirus emergency. The loan will be disbursed by Italy's biggest retail bank Intesa Sanpaolo, which has already authorized it pending the approval of guarantees the government will provide on 80% of the sum through export credit agency SACE. The request for state support has sparked controversy because FCA is working to merge with French rival PSA and the holding for the Italian-American carmaker is registered in the Netherlands. FCA's global brands include Fiat, Jeep, Dodge and Maserati. It was not immediately clear what conditions, if any, Italy has set as part of the guarantees and whether they would affect FCA's planned 5.5 billion euro ($6.2 billion) extraordinary dividend, which is a key element in the merger with PSA. FCA, whose shares were down 0.5% by 0908 GMT, had no immediate comment.   Earnings/Financials Chrysler Fiat Peugeot Italy

Aston Martin Brough Superior AMB 001 starts testing, shows off new color

Aston Martin announced last fall it would be dipping a toe into the motorcycle world with the help of bike builder Brough Superior. The first bike is the AMB 001, and it's finally undergoing track testing and development. The turbocharged 180-horsepower motorcycle is shown on video powering around a race track. It offers a good look at the bike's double-wishbone girder-style front end in action, a signature of Brough Superior bikes. Aston Martin Brough Superior AMB 001 View 5 Photos Besides a look at the bike on track, the two companies showed a version of the bike with dark red tinted carbon fiber panels. It also has some spiffy red brake disc spokes. We also get a close look at the instrument display, which actually appears to be on a smartphone that fits in a slot on the tank. Not many other details have been revealed. The companies announced they would only build 100 examples of the AMB 001. Each one will cost 108,000 Euros — or just shy of $120,000 — and they'll be delivered at the end of the year. Related Video:

2021 Kia Sedona's new look revealed as Korean-market Carnival

Last week, Kia showed teaser sketches of the next-generation Carnival, which we'll get as the 2021 Kia Sedona. Now the company has released actual photos of the minivan with the Carnival nameplate. No other information about powertrains or features have been announced, but there's plenty in the design to take a look at. Overall, the Sedona has a boxy, upright design seemingly more inspired by crossovers than traditional minivans. The low ride height and tall body do give it away as a van, though. Other crossover design cues include the faux skid plate panels on the front and rear bumpers. Look closer, and you find some really fascinating details across the van. At the front, you find an intricate variation on the Kia "Tiger Nose" grille with intersecting chrome diamonds. You'll also find that the LED running lights run out from the headlights and down the lower section of the grille surround. Hidden just inside the grille are the high beams for the headlights, and the lights each have chrome eyebrows. Along the side, a strong shoulder line blends into the door sliders, and the C-pillar is the most prominent of any modern Kia. It has a sort of chrome or aluminum finish with a light diamond cross-hatched pattern molded into it. At the back, there's a full-width taillight housing with LED elements. In the middle section, there are little chrome highlights just behind the red plastic adding another fine detail to admire. As previously mentioned, Kia only revealed photos of the new van, and no information on what's powering it or what other features it will have. It could continue using the 276-horsepower 3.3-liter V6 in the current Sedona, or it could upgrade to the 291-horsepower 3.8-liter V6 from the Telluride. There's also the possibility of using a turbocharged four-cylinder or possibly both a four-cylinder and a V6 depending on trim levels. We should know more closer to the on-sale date. It goes on sale first in South Korea at the end of the year's third quarter and other markets some time after. Related Video:    

Federal judge orders Barra and Manley to try to resolve GM racketeering lawsuit

DETROIT — A federal judge in Detroit on Tuesday ordered the chief executives of automakers General Motors and Fiat Chrysler Automobiles to meet by July 1 to try to resolve GM's racketeering lawsuit. U.S. District Court Judge Paul Borman called on GM CEO Mary Barra and FCA CEO Mike Manley to meet in person to try to resolve a case that could drag on for years. "What a waste of time and resources now and for the years to come in this mega-litigation if these automotive leaders and their large teams of lawyers are required to focus significant time-consuming efforts to pursue this nuclear-option lawsuit if it goes forward," Borman said at the end of a hearing during which FCA asked the judge to dismiss GM's lawsuit. Borman said instead, the companies need to focus on building cars and keeping people employed at a time when the coronavirus has hurt the U.S. economy and the country is also dealing with issues of racial injustice after the death of George Floyd, a Black man whose death in police custody in Minneapolis triggered worldwide protests. GM filed the racketeering lawsuit against FCA last November, alleging its rival bribed United Auto Workers (UAW) union officials over many years to corrupt the bargaining process and gain advantages, costing GM billions of dollars. GM is seeking "substantial damages" that one analyst said could total at least $6 billion. Barra and Manley should meet, taking into account social distancing to keep them safe, to "explore and indeed reach a sensible resolution," Borman said in the hearing, which was broadcast online. It is common for judges to order parties to try to resolve disputes out of court. But it is unusual that the chief executives of two big companies be instructed to meet face-to-face, not just to settle their differences but also to serve a greater good. A GM spokesman said the No. 1 U.S. automaker has a strong case and "we look forward to constructive dialogue with FCA consistent with the courtÂ’s order.” FCA had no immediate comment. Borman said he wanted to hear from Barra and Manley personally at noon on July 1 to provide him with results from their discussion. FCA shares were up 6.1% at $10.24 in New York and GM shares were down 0.5% at $26.25 on Tuesday afternoon. Government/Legal Chrysler Fiat GM

Junkyard Gem: 1978 Plymouth Sapporo

Chrysler began selling rebadged Mitsubishis in the United States in the 1971 model year, when the first Mitsubishi Colt Galants appeared as Dodge Colts here. This relationship prospered as the decade progressed, and the Galant Lambda coupe acquired Plymouth Sapporo and Dodge Challenger badges and went on sale in North America for the 1978 model year. We've seen a MitsuChallenger in this series, and now it's time for an example of its Plymouth sibling, found in a Colorado yard last month. Thanks to the increasingly good reputation of reliable and fuel-efficient Japanese machinery in the United States during the 1970s, the "manufactured in Japan" plaque became a selling point for these cars. The Sapporo had a 1.6-liter straight-four as its base engine, but this car has the optional 2.6-liter Astron. Its 105-horsepower output was fairly serious stuff for a small car in 1978. Later on, turbocharged Astrons powered the legendary Mitsubishi Starions, while naturally-aspirated versions went into Chrysler's K-Cars. The interior sports tri-tone bucket seats, racy-looking steering wheel, and full gauges. In the late 1970s through early 1980s, you needed opera lights on your car to be truly classy. The Chrysler Cordoba had them, the Lincoln Continental Town Car had them, the Oldsmobile Toronado had them, and this Sapporo has them. AM/FM stereo radios (or any radio, for that matter) and power remote mirrors were expensive options on most cars in 1978. The 1972 Winter Olympics took place in Sapporo, Japan, so the name had some recognition. Mitsubishi didn't start selling cars under its own badging here until the 1983 model year, and the Galant (sedan only) didn't arrive on these shores until 1985. The interior in this one got pretty well roasted from long-term outdoor parking (apparently in Nebraska, if we are to judge by the 2002 license plate I found inside the car). These cars aren't worth very much even in good condition, and so I still find numerous Malaise Era sporty Chryslerbishis during my junkyard travels. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. What a deal! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In the Sapporo's homeland, the TV ads for the Galant Lambda were less about cheapness and more about the glamorous Lambda lifestyle. This content is hosted by a third party. To view it, please update your privacy preferences.

Here are a few of our automotive guilty pleasures

It goes without saying, but I'll say it anyway. The world is full of cars, and just about as many of them are bad as are good. It's pretty easy to pick which fall into each category after giving them a thorough walkaround and, more important, driving them. But every once in a while, an automobile straddles the line somehow between good and bad — it may be hideously overpriced and therefore a marketplace failure, it may be stupid quick in a straight line but handles like a drunken noodle, or it may have an interior that looks like it was made of a mess of injection-molded Legos. Heck, maybe all three. Yet there's something special about some bad cars that actually makes them likable. The idea for this list came to me while I was browsing classified ads for cars within a few hundred miles of my house. I ran across a few oddballs and shared them with the rest of the team in our online chat room. It turns out several of us have a few automotive guilty pleasures that we're willing to admit to. We'll call a few of 'em out here. Feel free to share some of your own in the comments below. Dodge Neon SRT4 and Caliber SRT4: The Neon was a passably good and plucky little city car when it debuted for the 1995 model year. The Caliber, which replaced the aging Neon and sought to replace its friendly marketing campaign with something more sinister, was panned from the very outset for its cheap interior furnishings, but at least offered some decent utility with its hatchback shape. What the two little front-wheel-drive Dodge models have in common are their rip-roarin' SRT variants, each powered by turbocharged 2.4-liter four-cylinder engines. Known for their propensity to light up their front tires under hard acceleration, the duo were legitimately quick and fun to drive with a fantastic turbo whoosh that called to mind the early days of turbo technology. — Consumer Editor Jeremy Korzeniewski  Chevrolet HHR SS: Chevy's HHR SS came out early in my automotive journalism career, and I have fond memories of the press launch (and having dinner with Bob Lutz) that included plenty of tire-smoking hard launches and demonstrations of the manual transmission's no-lift shift feature. The 260-horsepower turbocharged four-cylinder was and still is a spunky little engine that makes the retro-inspired HHR a fun little hot rod that works quite well as a fun little daily driver.

Get a closer look at the 830-horsepower Lamborghini SCV12 track car

Lamborghini has just released a set of photos and video of its upcoming SCV12 hypercar, giving us a clearer look. The track-only machine does look similarly sized to the Aventador, but it apparently doesn't share much with the road car. The closest relation is has to the Aventador is the use of a naturally aspirated V12 engine. But this one is the most-powerful naturally aspirated V12 ever built by Lamborghini. It makes 830 horsepower, and that's partly made possible by the car's aerodynamics and intake manifold. The car features a huge roof intake scoop, and the hood has several vents that channel air to the scoop. At speed, these components create a supercharging effect, pushing more air into the engine than what it would pull in naturally. The engine is connected to a six-speed sequential transmission and powers only the rear wheels. Previous reports have mentioned the SCV12 will get a trick limited-slip differential. The SCV12's chassis and aerodynamics have other impressive details. The car produces more downforce than a GT3-class race car thanks to its huge custom carbon fiber rear wing and array of dive planes and splitters. Lamborghini says the SCV12 uses a unique carbon fiber chassis that uses other components such as transmission as structural members. The rear pushrod suspension is actually partly connected to the transmission. The SCV12 also features magnesium wheels wrapped in slick Pirelli tires specific to the Lamborghini. Besides the car, buyers of the SCV12 will also get to participate in a variety of driving programs and famous racetracks and get coaching from five-time Le Mans winner Emanuele Pirro. Technical support will be provided by Squadra Corse. Details such as pricing and number of units have yet to be revealed, but we won't have long to wait as Lamborghini will unveil the car later this summer. We wouldn't be surprised if the car costs well into the seven-figure range. Previous reports have suggested only 40 will be built. Related Video:    

Acura RDX Luggage Test | How much cargo space?

The Acura RDX is considered a compact luxury SUV, but there's actually very little that's compact about it. When lined up against its competitors, you can see that it enjoys a clear dimensional advantage. In fact, the RDX is pretty close to the Lexus RX, with an identical rear legroom figure and considerably more cargo space with the back seat raised. Obviously, I'll be addressing the latter here. On paper, Acura provides several cargo numbers calling out specific SAE measurement standards for each one. Basically, it has 31.1 cubic-feet behind its back seat when you include its underfloor storage and 29.5 cubic-feet when you don't. Even that smaller number is superior to everything in the segment save the Volvo XC60 (29.7), while the Lexus RX apparently has a seems-way-too-small 18.4.   Let's see what that size advantage means. It's obvious that this is a comparatively deep and wide space with plenty of air above the back seat line for bulkier items. Note that the cargo cover was not present in this test vehicle, so I couldn't test capacity with it in place. As in every luggage test, I use two midsize roller suitcases that would need to be checked in at the airport (26 inches long, 16 wide, 11 deep), two roll-aboard suitcases that just barely fit in the overhead (24L x 15W x 10D), and one smaller roll-aboard that fits easily (23L x 15W x 10D). I also include my wife's fancy overnight bag just to spruce things up a bit (21L x 12W x 12D). There you go, all the bags fit easily. This is pretty much identical to the Lexus RX (below left) and a much easier fit than the Mercedes GLC, which is  one of the only other compact luxury models I've tested. Both of these examples are more capacious than their specs would indicate. However, this is not the end of the RDX story. Remember when I mentioned that it has 31.1 cubic-feet when including its underfloor storage? Well, that might actually be underselling the extra space gained. First, I like that the floor flips back and rests flat so you can easily use the extra space. You can also fully remove the floor piece to gain access to the aft bin, which is deeper but oddly shaped.  Here are my four largest bags standing up, with sufficient rear visibility maintained, and you still have the full-width section of the cargo area including the underfloor bin. What can you fit there? How about a 38-quart cooler and the remaining two bags stacked haphazardly around it.

2021 Jaguar I-Pace updates include better infotainment, faster charging

Jaguar grabbed an armful of features from the JLR corporate store to improve the 2021 I-Pace, including bits from Land Rover and more technology from the brand's Formula E campaign. Restrained exterior mods start with Atlas Grey tips on the grille mesh, three new color choices in Caldera Red, Portofino Blue, and Eiger Grey, new wheel designs, and 19-inch wheels replacing the 18-inchers on the base-model S. An optional Bright Pack affixes a chrome grille surround, satin chrome window surrounds, and splashes of Atlas Grey on the mirror caps and rear diffuser. The optional Black Pack claims more real estate, painting the rear badges in gloss black. A 3D surround camera system is standard for 2021. Even more ease for drivers comes with the ClearSight digital rear-view mirror that debuted on the latest Range Rover Evoque. A rear-facing, wide-angle camera mounted in the infotainment system's roof antenna can sends images to the inside mirror with the flick of a toggle.  The biggest convenience addition is the Pivi Pro infotainment system that arrived with the new Land Rover Defender, replacing the Touch Pro Duo unit. A 12.3-inch digital gauge cluster pairs with the carryover 10-inch upper and five-inch lower instrument panel screens. Intended to reproduce the smartphone experience on larger screens, a backup battery gets the navigation initialized quickly, and zooming needs no more than a finger pinch. The "flat" menu structure puts oft-used functions on the home screen, and cuts in half the steps required to input a destination compared to the Touch Pro Duo. Android Auto and Apple CarPlay come standard, as does 4G data enabling live traffic, in-unit Spotify and other listening apps, and swift over-the-air updates. Wireless phone charging with signal boost is optional. On top of Pivi's algorithms to learn the best routing and stay quiet during parts of a route that the I-Pace travels regularly (why don't more systems do this?), the 4G support means continuously updated info on EV chargers along the route. Which brings us to hardware and software changes in the powertrain, courtesy of Formula E. Its 394 horsepower and 234 miles of range are unchanged, but the ease of getting that range does. Instead of the 7-kW, two-phase onboard charger, the 2021 I-Pace packs an 11-kW, three-phase charger. Plugged into an 11-kW wall box charger, range grows by 33 miles every hour, compared to 22 miles every hour with the 7-kW system.

Federal prosecutor fights bail for men accused of helping Carlos Ghosn escape

BOSTON — A U.S. prosecutor on Monday urged a judge to keep a former Green Beret and his son locked up as Japan prepares to formally seek their extradition on charges that they helped former Nissan boss Carlos Ghosn flee the East Asian country. Assistant U.S. Attorney Stephen Hassink argued during a virtual hearing that Michael Taylor and his son, Peter Taylor, have a "clear and present reason to flee" after being accused of helping Ghosn, who faces financial misconduct charges in Japan. "They're actually some of the best defendants that IÂ’m sure this court has seen positioned to actually succeed in that flight," Hassink said. He argued the men, who have been held without bail since being arrested in Massachusetts last month, helped smuggle Ghosn out of Japan in a box on Dec. 29, 2019. Ghosn then allegedly fled to Lebanon, his childhood home, which has no extradition treaty with Japan. Ghosn, Nissan's former chief executive, was charged with engaging in financial wrongdoing by understating his compensation in Nissan's financial statements. He denies wrongdoing. The Taylors' lawyers countered that had they wished to avoid prosecution they could have remained in Lebanon, where they were in January when Japan said it would seek their arrest, rather than return to Massachusetts. "If he's an expert of escape, he would not have returned to the United States," Robert Sheketoff, a lawyer for Michael Taylor, argued. He and other defense lawyers argued the case against their clients was flawed and that Michael Taylor, a U.S. Army Special Forces veteran and private security specialist, is at heightened risk of complications from COVID-19, which could spread in the jail. The hearing itself was held through a Zoom videoconference because of the coronavirus pandemic. U.S. Magistrate Judge Donald Cabell said he hoped to rule "as quickly as I can." Related Video:

Junkyard Gem: 1994 Subaru SVX

Before Subaru became best-known in North America for outdoorsy all-wheel-drive machinery (but after it was best-known for extreme cheapness), we got some wild-looking Subarus with strong overtones of science fiction over here. First, the wedge-shaped XT, XT Turbo, and XT6 arrived during the mid-1980s through early 1990s, with their video-game-style digital instrument panels and fighter-jet-joystick gearshifts. Starting in the 1992 model year, we saw the XT's replacement: the joyously weird SVX. The SVX cost plenty, especially when viewed against the backdrop of the super-cheap Subarus of the past, and not many were sold. Still, Coloradans love old Subarus, and I manage to find discarded SVXs here every now and then. Here's a screaming red '96, found in a self-service yard about 50 miles from Cheyenne. This was the first six-cylinder engine design put into production by Subaru and was essentially the Legacy's boxer four-banger with two extra cylinders. With 230 horsepower, the SVX was reasonably quick for its day. Unfortunately, Subaru didn't have a manual transmission that could handle the six's power, so all SVXs came with four-speed automatics. And, as it turned out, even that transmission didn't fare so well; transmission failures doom more of these cars than any other cause. You can swap in the manual out of a WRX if you have patience and money, and that's what some SVX owners have done in recent years. This one nearly reached 200,000 miles and the interior looks nice, so it was cared for during its life. Now this looks futuristic.  List price for this car started at $29,995, or about $49,800 today. The cheapest Mitsubishi 3000GT cost $30,690 in 1996, and it had just 218 horsepower and front-wheel-drive, so the cooler-looking and quicker SVX seemed like the better deal. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In its homeland, it was known as the Alcyone SVX. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. If you jump to 5:10 in this dealer-promotional video for the SVX, you'll see the street corner in Los Angeles where the irradiated corpse of J. Frank Parnell got incinerated in the film Repo Man. Featured Gallery Junked 1994 Subaru SVX View 15 Photos Auto News Subaru Automotive History Coupe subaru svx

Jaguar could replace two of its slow-selling sedans with a compact hatchback

Jaguar needs a home run, and it might merge the slow-selling XE and XF into a single model in a swing for the fences. The company is considering several ways to replace its two smallest sedans, and one option on the table is filling the gaps they'll create with a compact hatchback that would take Jaguar into a segment it's never been in before. Nothing is official yet, and Jaguar still hasn't ruled out developing a direct successor to each model, but British magazine Autocar learned at least two other options are being evaluated. Julian Thomson, the company's design boss, suggested their spot might be filled by a city-friendly hatch that would stretch about 177 inches from bumper to bumper, a figure that would catapult it into a segment dominated by the Audi A3, the BMW 1 Series, and the Mercedes-Benz A-Class. It would lure a new set of customers into the company's global showrooms. "I'd love to do smaller cars, and it feels as though the time is right. Jaguar needs a global product that could appeal to younger buyers, and more females as well," Thomson the publication. Although that's simple on paper, it's a lot more difficult to achieve in real life. "It's a tough sector. You need big numbers, which means big factories, and a big organization to sell them. But that's definitely where I would like us to be." Jaguar would need to find a cost-effective way to build the model. Developing an architecture from scratch is one possibility, though it's an expensive one for a company whose financial foundations are shaky at best. It could use its new MLA platform if it's flexible enough to underpin a small car, or it could ask BMW — which it's linked to via several on-going partnerships — to use the front-wheel-drive UKL architecture found under the aforementioned 1. One point the original report doesn't address is that, while a hatchback in the vein of the A3 would do well in Europe, it would fall flat on its face in the United States. That's why Audi, BMW, and Mercedes-Benz all added a trunk to their Euro-flavored hatches for American buyers who prefer three-box sedans. Jaguar would either need to do the same, meaning it would replace two sedans with a hatchback turned into a sedan, or it would end up giving up thousands of sales in one of the world's largest car markets, which would be counterintuitive. Another possibility floated by Autocar is replacing the XE (pictured) and the XF with a compact sedan described as eco-focused.

McLaren applies to trademark 'Sabre' with USPTO

In October 2018, The Supercar Blog dished on how exotic car collector and Instagram user dan_am_i had arranged with McLaren's MSO division to procure a special supercar. The working name of the new coupe was "Bespoke Commission BC-03," and it was rumored to be a road-going take on McLaren's Ultimate Vision Gran Turismo concept from October 2017. The Woking automaker's Vision GT was a track-only single-seater with 1,134 horsepower and 940 pound-feet of torque erupting from a 4.0-liter twin-turbo V8 powering the rear wheels and two high-output electric motors powering the fronts. Last October, someone put renders of the BC-03 on Instagram (pictured), the car's lines spread over a design spectrum stretching from the Senna to the Vision GT. Grand Tour Nation recently came across a trademark application McLaren submitted to the U.S. Patent and Trademark Office to reserve the name "McLaren Sabre." A saber, as our brand of English spells it, is defined in its noun form as "a heavy cavalry sword with a curved blade and a single cutting edge," in its verb form as to "cut down or wound with a saber." Based on a few bits of circumstantial evidence that we found at the McLaren Life forum, we believe the name will be applied to the production version of the BC-03.   Compare the BC-03 renders to this Instagram post of a camouflaged, fire-spewing McLaren caught testing after dark last September on what appears to be a track. It features the same shark fin and wing, same exhaust placement, same diffuser, very similar graphic over the engine bay. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In January of this year, Instagram user cococulture_ had business at the McLaren customer design studio. While there, they logged video of a scale version of the BC-03 under a cover. The caption is the gotcha:  This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. After checking our notes, we feel confident affirming that "Sabre" starts with an "S." Of course, nothing is certain until McLaren puts the coupe on the display stand, but the evidence lines up so far for the BC-03 to become the Sabre. The original coverage from two years ago claimed there'd be five examples made, with three of them spoken for. New numbers from McLaren Life posters say there will be 15 units built, all for the U.S. market, all reserved for McLaren Automotive's best VIP customers.

Fiat Centro Stile sells design sketches to support kids in Italy

Fiat's Centro Stile design studio in Europe has kicked off a project called stART Again to support the global charity Save the Children. The studio put 136 high-resolution sketches of Abarth, Alfa Romeo, Fiat, Fiat Professional, Jeep, and Lancia vehicles for download online at just ˆ20 a pop — about $22. The proceeds from all sales will be donated to a charity founded in England 101 years ago "to improve the lives of children through better education, health care, and economic opportunities, as well as providing emergency aid in natural disasters, war, and other conflicts." Save the Children will use the funds to provide supplies, teaching materials, and support for studies for more than 100,000 children in the most disadvantaged areas of Italy who have been additionally harmed by the coronavirus and its effects. There are a heap of knockout drawings available. The selection at the Alfa Romeo store ranges from a 1958 Alfetta 158 racer to the coming Giulia GTA, classics in between including the immortal GTV 6 and the left-field 75 1.8 Turbo TCC racer. The Fiat marketplace contains wares from Abarth, Fiat, and Fiat Professional, with a massive emphasis on the new 500, but the hardcore 1972 Abarth 124 Spyder and oddball 900E van get slots in there (the 900E looks like a Volkswagen Vanagon, but the 900E came first). The Jeep shop is all business and big tires, save for the 1942 Willys MB, but someone needs to take the 1956 Jeep Forward Control sketch off the page and into reality. And the Lancia store has more to offer than the Stratos and Delta Integrale, an ominous Aurelia B20 GT and a Fulvia GT part of the five-model lineup. For some reason, Maserati got left out of the graphic bonanza, as did Ram, Dodge, and Chrysler, which is a shame. That still leaves 136 good reasons to click through and help the kiddies. Related Video:

Hyundai Palisade and Genesis GV80 production idled

In February of this year, the coronavirus pandemic forced Hyundai Motor Company to idle production at most of its factories in South Korea. The Chinese suppliers that provided wiring harnesses for models like the Hyundai Palisade and Genesis GV80 hadn't recovered from their COVID-19 shutdowns, causing a shortage of components. Since then, Hyundai, along with automakers around the globe, has faced repeated hurdles to restoring desired production numbers. Just-Auto reports another hiccup, with Hyundai compelled to shut down lines that build the Palisade and GV80 at its Ulsan, South Korea complex again last week over a lack of parts. Just-Auto didn't specify the parts in question. On top of that, Hyundai had already idled three lines at two plants after an employee at a supplier died, the cause of death thought to be COVID-19. Kia needed to do the same for two entire facilities in South Korea after two plant workers were diagnosed with the illness. In the U.S., Hyundai Motor Manufacturing Alabama was idled from March 18 to May 4, resuming production at lower output on May 4 to manage inventory after the coronavirus and lockdown measures gutted new car sales.   Hyundai, like giant Ford and tiny McLaren, will be ruing the lost momentum of its recovery. The group turned in its best quarterly profit since 2017 at the end of last year, thanks to the larger margins that crossovers and SUVs deliver. Hyundai brand U.S. sales last year of 688,771 units was tantalizing close to an annual sum the brand hasn't hit since 2012. In January, the automaker predicted it would improve on last year's 3.5% group operating profit margin by hitting 5% this year. The nearly 10,000 reservations taken for the GV80 fueled the optimism, when Genesis sold just over 21,000 vehicles in total last year in the U.S. However, through the first quarter, group sales were down 11% globally and in the U.S. Worse, Just-Auto says the group's global sales have nosedived 26% through the first five months. The production halts on the models that deliver the best return will prolong the pain and make it sharper. Related Video:

Cadillac's Blackwing V8 was the best engine at the worst time

It should be clear that GM knows how to innovate and engineer excellent products when it wants to. Cadillac's 4.2-liter twin-turbo Blackwing V8 is recent proof of that. Yet, as related in an extensive Road & Track piece, the Blackwing became victim to some of The General's bugbears, like the reticence to — for whatever reasons — unleash its excellence everywhere, fund that excellence, and be consistent with that excellence over the long term beyond the Corvette and full-sized pickups and SUVs. The R/T story relates tales told by "several people deeply involved with the Blackwing project" about how an engine 18 years in the making was deprived of its reasons for being in less than three. Starting around 2000, GM spent a dozen years building Cadillac up to the point where the American luxury brand could rationally flip to the chapter called, "Taking the Fight to the Germans, but for Real this Time." The first steps in the plan meant an exclusive platform and an exclusive engine. The platform was called Omega. You know the engine's name. They were going to be the aluminum-blocked fist and velvet glove enabling Cadillac to break on through to the other side of luxury — proper luxury to global standards, that is — with a range of beautiful and dynamic crossovers and sedans. An engineer involved in the project estimates GM poured $16 million into the Blackwing's clean-sheet development. Many more seven-figure sums went into creating the first sedan on the Omega platform, the CT6. The automaker dropped millions again poaching ex-Audi and Infiniti chief Johan de Nysschen, and moving Cadillac's headquarters to New York City in 2014. Further pallets of cash funded the development and debut of the Escala concept at Pebble Beach in 2016. In 2018, GM revealed its dramatically named DOHC twin-turbo V8. Considering what came before, the Blackwing clearly wasn't designed for cars. It was designed for world domination. However, against the backdrop of plummeting sedan sales, the CT6 didn't sell like GM had hoped. The automaker hesitated to marshal another fleet of Brinks trucks to fund entries into a cratering bodystyle. Removing sedans from the world domination equation created more difficult math for the crossovers and the Escala.

2021 Ford Mustang Mach 1 revealed, plus driving the BMW M8 Convertible | Autoblog Podcast #632

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Producer Christopher McGraw and News Editor Joel Stocksdale. Before they get to this week's big news, they talk about the cars they've been driving, including the Toyota Land Cruiser, Range Rover Velar SVAutobiography Dynamic Edition, BMW M8 Convertible and BMW 840i coupe. Then they talk about Ford's big reveal of the 2021 Mustang Mach 1. Finally, in lieu of the regular Spend My Money segment, they talk about how Joel recently spent his own money on the newest edition to his personal fleet, a 2013 Volkswagen Beetle. Autoblog Podcast #632 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Cars we're driving: 2020 Toyota Land Cruiser 2020 Range Rover Velar SVAutobiography 2020 BMW M8 Convertible 2020 BMW 840i Fords reveals 2021 Mustang Mach 1 Spend Joel's Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video:

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.

This Lamborghini could become the most expensive car ever sold on Bring a Trailer

The collector-car auction site Bring a Trailer has seen some wildly high sales results recently, including a 2000 Honda Civic Si for $50k, a 1997 Acura Integra Type R for $82k, and a '71 Datsun 240Z for $310k. Now, a 1968 Lamborghini Miura P400 up for auction right now could set a new high-water mark for the most expensive car ever to sell on the site. Any Miura is a blue-chip collectible, a seminal supercar that was designed by Marcello Gandini of Bertone and considered by many to be one of the most beautiful cars of all time. The transverse-oriented, mid-mounted, quad-cam V12 is fed by four Weber carburetors and was said to be capable of propelling the Miura to 170 mph. This one appears to be a compelling, restored example. As a P400, it is an early series car (the P400 S and SV followed). The audacious lime green paint is a color change from the original white and is paired with a blue interior that records show to be the original hue. The car has been shown at the Quail in 2016, has run the Pebble Beach Tour d'Elegance in 2018, and won an award at Concorso Italiano in 2016. Bidding at the time of writing is $800k with 10 days still to go. In order for this Lambo to ring the bell as the most expensive BaT sale ever, it will have to top the current champion, BaT's own 1956 Mercedes-Benz Gullwing that was the first car sold via the site's premium listings. A no-reserve sale, it brought $1,234,567. Yes, we see what the bidder did. Current Miura values would appear to give this P400 a shot dethroning that Gullwing. Hagerty assigns the 1968 Miura P400 a value of $1.1m in #1 condition. Recently, Gooding and Co. sold a 1969 Miura P400 S at Scottsdale in January for $1,242,500. A never-restored 1969 P400 S sold for nearly $1.6m at RM Sothebys London sale last fall, while a non-running 1968 P400 sold by RM earlier this month in Europe for $800,000. It looks like it will be a close call for this Miura to achieve top honors at BaT. But whatever it sells for, the new owner may want to send a professional car hauler rather than simply bringing a trailer. Although the most ballsy move would be to fly in and drive it home. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

Detroit automakers observing 8:46 of silence to mark Juneteenth

GM Executive Vice President of Global Manufacturing Gerald Johnson, right, talks with employees at the Fairfax Assembly & Stamping Plant in Kansas City, Kansas. (file photo - GM)     All three Detroit automakers are observing Juneteenth, a day commemorating the end of slavery, on Friday by observing 8 minutes and 46 seconds of silence, among other companywide efforts to advance the causes of social and racial justice and equality. Juneteenth marks the date, June 19, in 1865 when Union soldiers, led by Maj. Gen. Gordon Granger, arrived at Galveston, Texas, and announced the Civil War had ended and enslaved African Americans were to be freed. President Abraham Lincoln had officially ended slavery more than two years prior via the Emancipation Proclamation, but Union forces didn't reach Texas until that time, so there was virtually no enforcement. The 8:46 timestamp is significant because it was the length of time that a police officer in Minneapolis knelt on the neck of George Floyd during an arrest, ultimately killing him and sparking waves of protests across the U.S. and overseas. Autoblog asked automakers about their plans to mark Juneteenth, what they were doing to advance the cause of social justice for Black people, and how many African Americans they employ in both blue- and white-collar jobs. We heard back from GM, Ford, Fiat Chrysler and Honda but not from Nissan and Toyota. General Motors GM’s U.S. workforce is 17.2% Black and 69.2% white, according to its most recent corporate Diversity and Inclusion Report. GM's total global employment is 173,000, and it says women and minorities represent 40% of its team of corporate officers. For reference, the Census Bureau says African Americans make up 13.4% of the U.S. population of roughly 328 million people. White people constitute 76.5%. As previously reported, GM planned to pause production at its factories on each shift today and observe silence for 8 minutes and 46 seconds. The company will also have a digital countdown clock atop the GM's headquarters in Detroit for the moment of silence. Additionally, Chairman and CEO Mary Barra has said she will lead a new Inclusion Advisory Board made up of people from within and outside GM to suggest areas for change and hold the company to its commitments to fight injustice and racial inequality.

Turns out the 2020 Lotus Evora GT is one of the best sounding cars on sale

Toyota has built plenty of engines that sound the business. We know the company has it in them, but what comes out isn’t always enthusiast-focused. Yet, hereÂ’s a fairly normal Toyota 3.5-liter V6, sitting in the middle of a Lotus. YouÂ’ll find it under the hood of a Toyota Camry, but here it is sitting under the engine cover of this 2020 Lotus Evora GT. Of course, Lotus hasnÂ’t dropped the engine in there without Lotus-fying it. This one has an Edelbrock supercharger with an integrated water-to-air charge cooler, plus a special calibration and tune from Lotus. In the Toyota, the base engine makes 301 horsepower. This Evora GT is putting out 416 horsepower and 317 pound-feet of torque. It also breathes through a set of pipes that the Brits would call ace. Check out the video at the top to get a taste of what we heard for a week straight. Our Evora GT was equipped with the standard exhaust. ThereÂ’s an optional titanium exhaust that drops 22 pounds from the curb weight, but Lotus says that it doesnÂ’t actually sound all that different. What does make a difference in the sound is changing the drive mode. ThereÂ’s a valve that opens in the exhaust when you select Sport mode or press the exhaust button. This drastically changes the sound heard from the cabin. In normal Drive mode, the exhaust is muted and just hanging out in the background. ItÂ’s shockingly quiet, but perfect for highway cruising because the drone goes away. Sport mode completely changes the tone and unlocks a sweet wail we didnÂ’t know the Toyota V6 had within it. ThereÂ’s no computer-enhanced or synthesized noises to be heard here. ItÂ’s all real. Taking it one step further in Race mode unlocks the tiniest bit more noise, Lotus says, but itÂ’s hardly noticeable in practice. We found the best experience was in Sport mode, since that reigns in traction control, retains stability control, and boosts throttle response by a bit. 2020 Lotus Evora GT View 6 Photos Under tunnels and overpasses — and this does feel weird to say, knowing the engineÂ’s origins — thereÂ’s a hint of Formula one car sound in there. WeÂ’re talking F1 from a few years ago, not the boring turbo engines of today. The way it shrieks and screams off walls, completely immersing you in the echoing sound, is intoxicating. Very few cars can match the Evora in sound quality, and thatÂ’s impressive considering some of the noisemakers car companies put out these days.

Lexus LC Coupe and Convertible add a bevy of official TRD parts

TRD stands for Toyota Racing Development, but that doesn’t stop the performance division from developing parts for Lexus products, too. One of those Lexus products it just released a set of performance parts for is the LC 500. The two-door coupe is our favorite Lexus for sale right now because of its excellent driving dynamics and stunning looks, so adding more performance is a good thing, right? WeÂ’ll stop short of saying itÂ’s a great thing for appearances in this particular instance. The parts shown here tend to muss up and clutter the LC's otherwise gorgeous design. That large rear wing, aero cowling above the rear seats and aero mirror cover all notch the aggressiveness up a level, but it makes the styling look a bit messier in photos. TRD does claim real performance gains from the parts, though. The modified side skirts reduce the amount of wind flowing to the rear tires, which makes the car slipperier through the air — TRD also claims a benefit in fuel economy and reduced wind noise. There are three new wheel designs, all offering a reduction in weight over the stock wheels and an improvement in rigidity. The wheels pictured on the car are the Lunanium Gun Metallic option. TRD says the giant aero cowl reduces wind noise in the cabin for the LC Convertible, and the big rear wing improves vehicle stability. Other available parts include a front spoiler (adds downforce, lowers front clearance by 30 mm), rear diffuser (adds moderate downforce, says TRD), smaller rear spoiler (improves stability at speed), and a “performance damper.” Details are short on this damper, but we can assume itÂ’s slightly stiffer than stock and could offer a noticeable handling improvement. ThereÂ’s a 3-D mini configurator you can play around with on TRDÂ’s site, too. You can only choose between the exterior color, interior color and aero cowl cover, but itÂ’s worth it to see what the mods might look like on your particular LC. Interestingly, the aero cowl sitting above the rear seats can be had in either black or white. Availability of the parts in the U.S. is still unclear, but weÂ’re reaching out to TRD and will update with any news we might hear.  Related video:

McLaren 720S Le Mans limited edition commemorates 25th anniversary of race win

McLaren made its first appearance as a constructor at the 24 Hours of Le Mans back in 1995, fielding seven McLaren F1 GTRs and taking the checkered flag with a 1-3-4-5 finish. Car #59, driven by JJ Lehto, Yannick Dalmas and Masanori Sekiya was the overall winner. To commemorate the 25th anniversary of that achievement, the company is rolling out a McLaren 720S Le Mans special edition. The 720S Le Mans is available in Sarthe Grey or McLaren Orange and features a functional gloss-black roof scoop and carbon-fiber louvered front fenders. The lower body sides, lower front bumper, and rear bumper are painted Ueno Grey. The unique five-spoke wheel design is inspired by that of the F1 GTR racer, and gold-painted brake calipers are fitted as well. The interior is equipped with carbon-fiber racing seats and is finished in black Alcantara with gray or orange accents. Drivers who plan to do some track time themselves can specify six-point seatbelts and a titanium harness bar. Multiple option packages can add more carbon-fiber exterior elements, and the brand's MSO Defined and MSO Bespoke programs offer further customization. The 4.0-liter M840T twin-turbo V8 is unchanged and spins out 710 horsepower at 7,500 rpm along with 568 lb-ft of torque. Paired with a seven-speed dual-clutch automatic, it's good for a top speed of 212 mph and a 0-to-62-mph time of 2.9 seconds. Just 50 examples worldwide will be produced, with deliveries scheduled to begin in September. U.S. pricing has not been announced, but expect to dig a little deeper than the $299,000 (plus $2,500 destination) for the standard 720S. Related Video:    

2021 Acura TLX is the first model with Honda’s new proprietary airbag

When it arrives in showrooms this fall, the 2021 Acura TLX will be the first vehicle equipped with the new three-chamber front passenger airbag design Honda announced last year, reinforcing the automaker’s commitment to infused the sports sedan with state-of-the-art safety bonafides. As explained in the video above, the new airbag was designed and developed by engineers at HondaÂ’s R&D campus in Ohio and auto supplier Autoliv to mitigate the risk of severe brain trauma associated with angled frontal collisions. With its official launch in the 2021 TLX, the airbag will begin to be offered to other automakers through Autoliv. Work on the new airbag design stemmed in part from a 2013 U.S. Department of Transportation study that used MRI scans to look at brain injuries resulting from vehicle accidents and led to the creation of Brain Injury Criteria methodology for measuring brain injuries in vehicle crashes. Accordingly, Honda and Autoliv designed an airbag that does away with the traditional single-inflatable chamber in favor of something likened to a catcherÂ’s mitt, with a central “sail panel” net catching and slowing down the head and directing it inward between the two inflated side chambers. The idea is to better manage lateral forces in a collision that can cause an occupantÂ’s head to rotate severely and at high velocity. Honda is hailing the new airbag as a major advance in airbag design. It follows the companyÂ’s introduction, in 1990, of the first vertically deploying front passenger airbag for the 1991 Acura Legend, a design that became broadly adopted in the industry. Honda is packing lots of other safety features into the 2021 Acura TLX, including knee airbags for driver and front passenger, both contained beneath a panel on the underside of the instrument panel, and eight airbags total, the most ever for the model. It will also come standard with the AcuraWatch suite of advanced safety and driver-assist technologies and AcuraÂ’s Advanced Compatability Engineering body structure, which has been advanced to boost occupant safety by redirecting energy away from the passenger compartment in a frontal crash. Acura says it expects to get a five-star crash rating from the National Highway Traffic Safety Administration and a Top Safety Pick+ rating from the Insurance Institute for Highway Safety.

Vans aren't glamorous, but they're key to EU blessing FCA-PSA merger

MILAN/PARIS — Their silhouettes don't stir dreams of adventure like a sports car or trendy SUV, but vans are a rare source of profit for European carmakers, which is why EU regulators are focused on them as they decide whether to back an industry mega-merger. European competition regulators are worried that Fiat Chrysler and Peugeot maker PSA's proposed merger may harm competition in small vans. With a total of 755,000 vans sold last year in Europe, the combined Fiat Chrysler (FCA) and PSA would get a market share of around 34%, based on industry data, more than double that of Renault and Ford, with shares around 16% each. Volkswagen and Daimler follow with market shares of 12% and 10% respectively. "Commercial vans are important for individuals, SMEs and large companies when it comes to delivering goods or providing services to customers," European Union competition chief Margrethe Vestager said in a statement, announcing an in-depth investigation into the proposed merger. "They are a growing market and increasingly important in a digital economy where private consumers rely more than ever on delivery services." Dario Duse, a managing director at consultancy firm AlixPartners, said demand for vans was not based on people's disposable income, as for cars, but rather on GDP and industrial trends, and in particular the logistics industry, where big players such as Amazon or DHL operate. "Logistics is a business segment which is having a significant growth, for several reasons including e-commerce, where you need efficient and agile vans for interurban and city deliveries," he said. "LCVs (light commercial vehicles) may recover faster than passengers cars in the post-COVID-19 phase." Sales of vans up to 3.5 tonnes in Europe amounted to 2.2 millions vehicles last year, compared to 15.8 million for passenger cars, according to data provided by the European Auto Industry Association (ACEA). The light commercial vehicles (LCVs) market may be secondary in terms of volumes, but it remains highly profitable in an industry where margins are constantly under pressure. Margins are generally higher than on passenger cars, up to 5-10 additional percentage points, AlixPartners says. "With LCVs you don't have to fulfill a series of consumer expectations that drive additional complexity and costs, such as for interiors. LCV customers are more rational and business driven," Duse said. And while electrification in heavy trucks is complicated, it might come sooner for LCVs.

Face-lifted Bentley Bentayga bares it all on Instagram

Bentley's updated Bentayga unofficially made its global debut on Instagram. Leaked images confirm the company's best-selling model receives a subtly redesigned front end, and a handful of new tech features inside. Instagram user Wilco Blok posted the four images. Some look like they were scanned from a marketing brochure, while others were seemingly taken by a spy photographer. The quartet gives us a decent idea of what to expect from the SUV, starting with a new-look front end that gains oval headlights, a wider grille that's more neatly integrated into the rest of the fascia, and a reshaped lower bumper. The nip-and-tuck creates a visual link between the Bentayga and the Continental GT. Photos of its rear end weren't leaked.           View this post on Instagram                       A post shared by WILCO BLOK (@wilcoblok) on Jun 17, 2020 at 2:06am PDT Most of the interior changes seem to be technology-related. Bentley added a fully digital instrument cluster, and a wider touchscreen that displays an updated infotainment system. Above it, the climate control system's vents are now rectangular instead of round. Below it, designers rearranged the buttons on the center stack. Odds are there are other tweaks not shown in the leaked images. Something else that remains to be seen is what the face-lifted Bentayga looks like under the hood. It's currently offered with a 4.0-liter V8 rated at 542 horsepower, a 6.0-liter W12 available with 600 or 626 horses, and a 456-horsepower plug-in hybrid drivetrain built around a 3.0-liter V6. These specifications could look a little bit different when the model breaks cover. Bentley hasn't commented on the images, and it hasn't announced when it will reveal the updated Bentayga yet. However, now the cat is out of the bag, an official introduction will likely take place sooner rather than later. Related Video:    

Don't call it a minivan: Kia previews new Sedona Grand Utility Vehicle

Kia sells more crossovers than ever, but it's not forgetting about its entry into the minivan segment. It released a design sketch to preview the next-generation Carnival, which is known as the Sedona in the United States. Stylists shun the increasingly unpopular minivan label; they claim they've created a Grand Utility Vehicle whose design is more stylish, more futuristic, and, somewhat inevitably, more SUV-like than the outgoing model's. The sketch released by the South Korean firm indicates the Sedona's front end receives a taller, flatter hood, a bigger grille with vertical slats and a chrome-look frame, plus thin horizontal lights accented by LED elements. Its overall proportions don't drastically change, no one's going to mistake it for a Stinger, but blacked-out door pillars create the illusion of a floating roof. We don't know what the rear end looks like yet, though the company noted the horizontal crease below the window line links the lights on both ends. The alloys are gigantic, but keep in mind we're looking at a design sketch. The production model will ride on smaller wheels with more sidewall. We'll need to muster a little bit of patience to find out what the Sedona looks like inside, or what its sheetmetal hides. Practicality is the name of the game in the minivan segment, so Kia will likely pack an array of clever features into the van to make commuting, kid-hauling, and road-tripping easier. Seeing a hybrid powertrain join the specifications sheet would make sense considering the market's on-going shift towards electrification, but nothing has been confirmed at this point. The current-generation Sedona receives a 3.3-liter, 276-horsepower V6 for the American market, and we wouldn't be surprised if it downsizes to a turbocharged four-cylinder. Kia will introduce the fourth-generation Carnival this summer, and the model will go on sale in its home country in the third quarter. It will begin arriving in other global markets shortly after. Although the company didn't specifically mention the United States, we'd bet on seeing it in showrooms as a 2021 model. Minivans are getting their lunch money taken by crossovers here, but the segment remains reasonably big. Kia is one of its underdogs: It sold 16,000 examples of the Sedona in 2019, while Honda and Chrysler each found nearly 100,000 buyers for the Odyssey and the Pacifica, respectively, and Toyota reported 73,585 Sienna sales.

FCA to skip summer shutdowns as automakers rev up U.S. assembly lines

DETROIT — Several of FCA's facilities will skip their usual summer shutdowns to get a jump on rebuilding inventory, the company confirmed early Wednesday.  The plants that will remain open include three in the United States (Jefferson North in Detroit, Toledo Assembly in Ohio, and Sterling Heights Assembly in suburban Detroit), one in Canada (Brampton Assembly in Ontario) and two in Mexico (Saltillo Truck Assembly and Saltillo Van Assembly).  This will allow dealers to address depleted inventory of popular trucks and muscle cars, Automotive News reports. Other facilities not named will observe their normal one- and two-week breaks.  Automakers are speeding up U.S. assembly lines to meet recovering demand, increasingly confident coronavirus safety protocols are working to prevent outbreaks in their plants but wary of the challenges workers face outside. Screening workers for COVID-19 using temperature scans and questionnaires, the automakers have detected some people who reported for work despite being sick. Some plants have been briefly shut down for disinfection, but so far, there has not been a major outbreak within a U.S. auto plant since most reopened May 18, company and United Auto Workers union officials said. The risk of an infection picked up outside a plant spreading along assembly lines remains a prime concern, however. An outbreak could shut down a factory costing a manufacturer millions of dollars a day. The disruption caused by the pandemic is creating other challenges as well. At Ford Motor Co's F-series pickup truck plant in Louisville, Kentucky, the company has given more than 1,000 workers leave related to COVID-19 concerns. It hired temporary workers to fill their jobs as the plant accelerates production of trucks critical to Ford's financial recovery. Demand for pickup trucks helped boost U.S. auto sales in May, and contributed to stronger than expected overall U.S. retail sales for the month. Officials of UAW Local 862, which represents workers at the Louisville plant, said a lack of child care was a significant issue for members. It had led many to stay away from the plant and collect increased unemployment benefits provided under the federal CARES coronavirus relief act. Ford has now begun arranging subsidized child care for UAW workers, Gary Johnson, the automaker's head of manufacturing told Reuters.

Meet the Buick Velite 7, the Chevy Bolt's Chinese cousin

The Buick Velite 7 has officially been revealed after having been leaked and spied a few months ago. The name derives from Buick's line of electrified models it sells in China, of course the design shows it's most closely related to the Chevy Bolt EV. Buick hasn't revealed many details about it, and only one photo, but we do get to see it and we also have a range estimate. The range estimate is 500 kilometers on the NEDC cycle, which translates to 311 miles. That's actually less than the NEDC estimate for the Bolt EV, which is 565 kilometers or 351 miles, which increased for the 2020 model year from 520 kilometers or 323 miles. Of course NEDC figures tend to be much higher than EPA numbers, which rated the current Bolt EV at 259 miles and the previous version at 238. As such, we would expect this Buick to have an EPA range closer to 210 to 220 miles. We don't know what resulted in the lower range, but it could have something to do with additional weight or slightly worse aerodynamics. It could be both. Design-wise, the Buick is clearly based on the Bolt, but has a more aggressive front bumper and a trendy partially floating roof. It also seems to have a slightly boxier, taller profile, mainly because of the nose. Buick hasn't released any other details about the crossover, preferring to save them for the car's launch later this year. Since it seems so closely related to the Bolt, it probably has the same drivetrain: a single electric motor sending 200 horsepower and 266 pound-feet of torque to the front wheels via a single-speed transmission. Related Video: