Blog

2020 Mazda CX-5 diesel is still, and perhaps forever, MIA

Halfway through 2020, the most recent Mazda CX-5 diesel you can find anywhere in the U.S. is a 2019 model year — the only one offered so far. With automaker factories beginning their model-year turnovers shortly, CarsDirect did some poking around as to the fate of an oil-burning 2020 CX-5. The outlet couldn't get definitive answers, but a host of secondary evidence suggests the diesel crossover will skip this year, naturally leading to the question of whether the model will skip this market from now on.  Asked in April about the crossover's fate or its arrival, Mazda would only say that "with the current state of the world, many things are tentative." The following month, the automaker's early fleet ordering guide pegged this month as marking the end of CX-5 production, 2021MY crossovers starting down lines in August. Mazda had nothing to say about that information, either. When CarsDirect got in touch again for this latest report, Mazda professed the delay has nothing to do with emissions certification. Then the wall went up again, the only other comment being, "We cannot confirm any details for the CX-5 Diesel at this time."    We're speculating, but at this point, even if Mazda could get 2020MY CX-5 diesels on the lot, why should the automaker bother? The challenges for diesel in general, and this expression of diesel particularly, are clear to everyone; our last post on the CUV, six months ago, was about the five-figure discounts dealers were offering. A quick check on Autotrader at the time of writing shows 45 examples of the 2019 CX-5 diesel available nationwide, plenty of them still priced in the low- to mid-thirties. On Autotrader Canada, which specifies vehicle availability beyond the "1,000+ Results" on the American site, there are 6,135 CX-5s listed nationwide, only 58 of them diesel. Canadian outlet Motor Illustrated wrote, "Mazda recently told us they had a lot of Mercedes-Benz GLE diesel owners and other diesel fans with upscale models trade for a CX-5 diesel." Apparently luxury diesel crossover conquest buyers aren't numerous enough to support a model line. The gasoline versions of the 2020 Mazda CX-5 launched in November last year. It shouldn't take that long for us to find out about the fate of the 2020 CX-5 diesel, or if there will be a 2021 model. Related Video:    

100th Anniversary 2020 Mazda MX-5 Miata announced for sale in the U.S.

The 100th Anniversary Special Edition Mazda MX-5 Miata will be sold in the U.S. When Mazda initially announced all of its 100th Anniversary vehicles, U.S. availability was still questionable for Mazda’s roadster. ThatÂ’s no longer the case, as the company announced all the details on the car today. ItÂ’s going to be based off the Grand Touring trim, so itÂ’s outfitted with the maximum amount of equipment. Those that purchase one will be able to choose from either the traditional soft top or an RF version. The soft top is red, while the RF gets a black-painted roof. Every last one of them will be painted in Snowflake White Pearl Mica and feature red accents throughout. Mazda plans on making them with both manual and automatic transmissions. We asked how many will be available, but Mazda told us it isn't sharing that information yet — limited edition Miatas tend to sell out quick. On the exterior, the front fender gets a “100 Years 1920-2020” badge. Wheel center caps for the 17-inch dark-silver wheels also have the 100th Anniversary logo on them, but thatÂ’s it for the exterior. The inside is where Mazda really had its fun. Full red leather seats and red carpeting pop and make this interior unlike any other Miata on sale today. Both the headrests and the floor mats feature 100th Anniversary logos, and as a finishing touch, Mazda put together a special 100th Anniversary key fob that is embossed with the same logo and comes presented in a special edition box. Since this car is based on the Grand Touring, you get performance goodies like Bilstein dampers, limited-slip differential, front shock tower brace and sport-tuned suspension. Of course, it needs the proper six-speed manual transmission to get all of that. From a cost perspective, you only pay a small price for the special edition car. With the soft top and six-speed manual, it totals $33,615. ThatÂ’s just $1,000 more than an identically-equipped regular MX-5 Grand Touring. An RF with the manual totals $36,370, which again, is just $1,000 more than the standard RF. The difference is the same with the automatic transmission Miatas. A soft top auto costs $34,140, while an automatic RF costs $35,695. Mazda says the special edition Miatas will be arriving in dealerships “later this year.” Related Video:

Buick Envision interior just as nice as its exterior

GM China loosed more photos of the all-new 2021 Buick Envision, this time of the interior. We are happy to report that the cabin design is just as pleasing to the eye as the exterior. When the 2021 model shows up for the reunion with its earlier model-year siblings, no one will recognize it. The modestly dated interior of the current crossover with its too-small infotainment screen and Rorschach-blot button placement is all gone. The gaudy curves and textures on the current instrument panel give way to a simple, split-level, bi-color form. What's more, the IP subtly carves out distinct driver and passenger spaces, a design trait normally reserved for sports cars. When Buick and GMC design boss Helen Emsley said the coming Envision would possess "striking styling designed to combine the expressiveness of a car with the practicality of an SUV,” she wasn't lying. The new steering wheel picks up more substantial spokes decorated with linear buttons instead of the circular pads, and its center cap is wider and no longer reminiscent of an alien face. The dash's dark portion up top houses a 10-inch infotainment screen canted at an 18-degree angle for the driver's ease-of-use. Air vents accentuate the break between the top and bottom of the instrument panel. Beneath the center vents, in the cabin-colored portion of the dash, are a slick set of climate controls. The pushbutton gear selectors along the left side of the center tunnel come from the China-market Enclave. And even the cupholders are handsome. The Envision Avenir gets a few exterior changes like a mesh grille and nicer wheels to set itself apart, the interior wearing Ivory White and Jazz Black hues and diamond-stitched seats. We might prefer the interior with peanut-butter brown and black even more. And suddenly, the Cadillac XT4 could have a problem; the Buick and the Cadillac share the E2 platform, but one of them — in photos, at least — is incontestably more fetching. As for tech, expect Android Auto and Apple CarPlay standard, and driver safety features such as automatic emergency braking with pedestrian detection, lane-keep assist, and the automaker's safety alert seat. Regular conveniences will include space for five, nearly two dozen storage cubbies, and an available giant panoramic moonroof. The only engine we've heard tell of so far is a 2.0-liter turbocharged unit, expected to be a carryover mill with 252 horsepower and 295 pound-feet of torque.

2021 Cadillac XT6 adds 2.0-liter turbo and new base trim in second year

The 2021 Cadillac XT6 has been announced, and the three-row crossover is going through a few notable changes in its second model year. There’s a new base trim and base engine, and Cadillac has added tech features to improve the experience. Starting with the new engine: ItÂ’s the 2.0-liter turbocharged four-cylinder that was initially introduced in the XT4 as the base motor. Power output is the same as the compact crossover at 237 horsepower and 258 pound-feet of torque. ItÂ’s paired with the nine-speed automatic transmission and comes with front-wheel drive as standard — all-wheel drive is a $2,000 option. That engine only comes with the new base trim level: Luxury. Every other trim receives the 3.6-liter V6. The new Luxury trim (pictured above) is being added to the lineup as a base model to compliment the Sport and Premium Luxury trims. This will be the cheapest and most basic of the XT6s, but you can still option all-wheel drive. Features include 18-inch wheels, the eight-inch touchscreen infotainment system, black leatherette seats (heated and powered in front), brushed aluminum trim, tri-zone climate control and a number of other smaller extras along with a suite of driver assistance technologies. Cadillac is also adding wireless Apple CarPlay and wireless Android Auto to the lineup as standard equipment — they were standard previously but required the traditional wired connection. ThereÂ’s also a new 20-inch wheel for the Sport model, and three new color options: Dark Moon Blue Metallic, Wilder and Infrared Tintcoat. The XT6 LuxuryÂ’s base price is $48,990, including the destination charge. ThatÂ’s a fair cut below the 2021 Premium Luxury ($53,790) and the Sport ($58,190) trims, but you are losing out on the additional equipment and luxury those trims offer. Cadillac says the updated 2021 XT6 will land in dealerships this fall. Related video:

McLaren Senna LM gets a video walkaround

At the end of last year, rumor got out that 26 units of the McLaren Senna production run were still waiting their turn to impress the world. Word was that McLaren Special Operations would remake the roughly two dozen coupes into three special editions, the most numerous of them a Senna LM model. A finished example of the predicted coupe found its way to New Zealand, where McLaren Auckland Brand Manager Luke Neuberger gave the Payapa Orange supercar a walkaround for YouTube channel Giltrap TV. The English carmaker recently launched its 720S Le Mans as a tribute to winning — and hoarding four of the top five finishing positions at —  Le Mans in 1995 with the F1 GTR. That coupe got dressed in McLaren orange with Ueno Grey accents and five-spoke wheels recalling the OZ Racing rims on the F1 GTR, as well as vented front fenders, a roof scoop, and gold-painted brake calipers. MSO went further with the Senna LM, which is natural considering the Senna homage is reputed to cost about $1.7 million, compared to the 720S homage starting at $299,000. The Senna LM bodywork hasn't changed in front from the standard Senna, but the Auckland example wears a uniform color all over; the front fascia of a standard Senna sports black accents in the headlight pockets. Body-colored vents adorn the front fenders above a set of gray five-spoke wheels, and one of the many tiny particluars on the Senna LM sees the center-lock wheel nuts colored red on the left side, blue on the right. Behind those wheels, gold calipers clamp vented discs. As we saw in a spy shot of an early mule left in an industrial unit, the clear pane in the doors is filled in with a body-colored panel. Further back, the glossy carbon fiber wing endplates feature the initials "LM" carved out to show unfinished carbon fiber.  Neuberger wouldn't confess to a horsepower rating beyond "800-ish," but MSO worked on the 4.0-liter twin-turbo V8. The track-only Senna GTR makes 814 horsepower and 590 pound-feet of torque. The Senna LM engine's been blueprinted, the heads ported and polished, and four exhaust pipes stand up through the Senna LM's engine cover. The standard Senna shows three pipes.

2021 Subaru Ascent Review | One for the faithful

The 2021 Subaru Ascent doesn't really stand above and beyond the crowded field of three-row family crossovers. There are those that make a bolder statement outside, that are more luxurious inside and that are better to drive. Some are even more spacious or versatile. Frankly, it's hard not to point you towards a Kia Telluride, Hyundai Palisade or Toyota Highlander instead. However, the Ascent really isn't for the general three-row crossover-buying population. It's for Subaru's fiercely loyal customers, and specifically the great many who outgrow their Foresters and Outbacks. Previously, if they needed more space and/or seats, they were forced to abandon the brand that A) they were used to, and B) catered to their specific requirements that often involve outdoorsy adventures. With the Ascent, they get that extra space but it comes with the same 8.7 inches of ground clearance and beefy roof rails, an awfully familiar driving experience, and the cabin puts the same emphasis on no-nonsense, user-friendly controls. The Ascent even looks like an Outback, albeit a gigantic one. So although the Ascent isn't for everyone, it should be just right for those already onboard the good ship Subaru. What's new for 2021? There are more standard features this year, all of which enhance safety. The standard headlights on every trim level are now steering-responsive LED units, while the standard EyeSight suite of driver assistance tech gains lane-keeping assistance and lane-centering for the adaptive cruise control system. There are also now seatbelt reminders for second- and third-row occupants. Buckle up kids! What's the Ascent interior and in-car technology like? From the driver's seat, the Ascent's packaging displays Subaru's pragmatic philosophy to car design. All the gauges are easy to see and read at a glance, knobs and buttons are easy to locate — both those of the software-based touchscreen infotainment system and the physical ones on the steering wheel and center stack. There aren't as many clever cubbies as in a Honda Pilot or Toyota Highlander, but there are a grand total of 19 cupholders spread throughout the cabin. Anticipate frequent bathrooms stops. The base infotainment system is a 6.5-inch touchscreen, but moving up to the Premium trim bumps that up to an 8.0-inch unit. The image quality is crisp, the colors bright, and simple tasks like selecting a radio preset are made easy with big virtual buttons.

2021 Subaru Ascent Review | One for the faithful

The 2021 Subaru Ascent doesn't really stand above and beyond the crowded field of three-row family crossovers. There are those that make a bolder statement outside, that are more luxurious inside and that are better to drive. Some are even more spacious or versatile. Frankly, it's hard not to point you towards a Kia Telluride, Hyundai Palisade or Toyota Highlander instead. However, the Ascent really isn't for the general three-row crossover-buying population. It's for Subaru's fiercely loyal customers, and specifically the great many who outgrow their Foresters and Outbacks. Previously, if they needed more space and/or seats, they were forced to abandon the brand that A) they were used to, and B) catered to their specific requirements that often involve outdoorsy adventures. With the Ascent, they get that extra space but it comes with the same 8.7 inches of ground clearance and beefy roof rails, an awfully familiar driving experience, and the cabin puts the same emphasis on no-nonsense, user-friendly controls. The Ascent even looks like an Outback, albeit a gigantic one. So although the Ascent isn't for everyone, it should be just right for those already onboard the good ship Subaru. What's new for 2021? There are more standard features this year, all of which enhance safety. The standard headlights on every trim level are now steering-responsive LED units, while the standard EyeSight suite of driver assistance tech gains lane-keeping assistance and lane-centering for the adaptive cruise control system. There are also now seatbelt reminders for second- and third-row occupants. Buckle up kids! What's the Ascent interior and in-car technology like? From the driver's seat, the Ascent's packaging displays Subaru's pragmatic philosophy to car design. All the gauges are easy to see and read at a glance, knobs and buttons are easy to locate — both those of the software-based touchscreen infotainment system and the physical ones on the steering wheel and center stack. There aren't as many clever cubbies as in a Honda Pilot or Toyota Highlander, but there are a grand total of 19 cupholders spread throughout the cabin. Anticipate frequent bathrooms stops. The base infotainment system is a 6.5-inch touchscreen, but moving up to the Premium trim bumps that up to an 8.0-inch unit. The image quality is crisp, the colors bright, and simple tasks like selecting a radio preset are made easy with big virtual buttons.

2022 Mini Hardtop spied with bigger grille

The current generation of Mini Hardtop and Convertible has been around since 2014, so it doesn't come as a big surprise that one of our spy photographers spotted a group of test cars sporting refreshed styling. These cars were all Mini Cooper S or Mini John Cooper Works models, and the mild styling tweaks make us believe these updates will be applied to the 2022 Mini Hardtop and Convertible lines, with small changes for different trims. One shot of a few Minis shows one of them wearing no camouflage at all. While the angle isn't ideal, there's still plenty we can make out. It appears to be a John Cooper Works based on the particularly large lower and outboard grilles. It seems to have a John Cooper Works badge in the side of the grille with black tape over it, too. The main grille is noticeably larger than that of the current model. It also adopts a mesh pattern over the whole surface. There's still a bar dividing the grille, but the division is less distinct than on the current car. We can also see this version gets a pronounced front splitter. The other cars in these shots have more thoroughly disguised front and rear ends. The larger main grille does seem to show through, as well as more lower grille area. At the back, the updated Mini has a wider diffuser area, and immediately above it is a set of vents that span the same width. This seems to be a John Cooper Works since it looks fairly aggressive with large center exhaust tips. The regular Hardtop and Convertible models will probably have more toned down versions of this bumper without the center exhaust. Since these are relatively minor styling updates, we expect them to show up on the 2022 Hardtop and Convertible variants. They could be accompanied by powertrain and feature changes, too. In fact, reports have said that there could be a smaller Hardtop model that's electric-only coming around 2022, with this refreshed version sticking around for a few years during the transition. Related Video:    

Nissan officials answer to angry shareholders on red ink, Ghosn scandal

Smoke engulfs the Nissan logo as workers burn tires during a protest in Barcelona, Spain, where the automaker is closing its plant, costing 3,000 direct jobs. (AP/Emilio Morenatti)     TOKYO — Nissan Chief Executive Makoto Uchida told shareholders Monday he is giving up half his pay after the Japanese automaker sank into the red amid plunging sales and plant closures in Spain and Indonesia. Uchida apologized for the poor results and promised a recovery by 2023, driven by cost cuts and new models showcasing electric-car and automated-driving technology. “We will tackle these challenges without compromise,” he said at a live-streamed meeting. “I promise to bring Nissan back on a growth track.” Executives for the company also blasted suggestions in media reports of a conspiracy within the company to oust Carlos Ghosn. The former chairman's 2018 arrest in Japan on financial misconduct charges has led to much speculation that the move was orchestrated by Nissan executives who opposed closer ties with partner Renault. “I know that in books and the media there has been talk about a conspiracy, but there are no facts whatsoever to support this,” Motoo Nagai, chairman of NissanÂ’s auditing committee, told shareholders at the companyÂ’s annual general meeting. Responding to demands from a shareholder to address the speculation, Nagai argued that the investigation into Ghosn was conducted both internally and by outside law firms. All the worldÂ’s automakers have been hurt by nose-diving sales caused by the coronavirus pandemic. But the problems are especially serious for Nissan, which already was fighting to salvage its reputation after the financial misconduct scandal of former star executive Ghosn. Nissan, based in Yokohama, Japan, sank into its first annual loss in 11 years, reporting a 671.2 billion yen ($6.3 billion) loss for the fiscal year that ended in March. It has not given a projection for this fiscal year, citing uncertainties over the virus outbreak. One angry shareholder got up and said executives should give up more of their pay since investors were getting zero dividends. Another said Nissan needed to do more to strengthen its governance, arguing things have been getting worse, not better, since the departure of Ghosn.

Junkyard Gem: 1986 Pontiac Sunbird Sedan

The J-Body platform was a giant seller for GM, staying in production from the first 1981 Chevrolet Cavalier all the way through that final 2005 Pontiac Sunfire. Outside of North America, Opels and Daewoos and Isuzus and Holdens and Vauxhalls and even Toyotas flew the J flag, and better than ten million rolled out of showrooms during that quarter-century. In the United States, Chevrolet, Oldsmobile, Pontiac, Buick, and Cadillac each sold J-Bodies. Of those, the Pontiac Sunbird often had the sportiest image, more cavalier than even the Cavalier Z24. I've documented a discarded Sunbird Turbo in the past, and now here's a bread-and-butter Sunbird sedan from the same era. The Sunbird name began its life in 1976 on the Pontiac-badged version of the rear-wheel-drive Buick Skyhawk, itself based on the Chevy Vega. The first J-Body Pontiacs had J2000 badges, then 2000 badges, then 2000 Sunbird badges, until finally the pure non-2000 Sunbird appeared for the 1985 model year. I remain disappointed that the 2000 name didn't survive into our current century, because we could have had a 2000 Pontiac 2000, or just the "2000 2000" for short. The base engine in the '86 Sunbird was this SOHC 1.8-liter four of Brazilian origin, rated at 84 horsepower. Originally developed by Opel in the late 1970s, this engine family went into cars built all across the sprawling GM empire. 84 horsepower doesn't sound like much— and it wasn't much, even by 1986 standards— but at least the original buyer of this car had the smarts to get the five-speed manual transmission. This car weighed just 2,336 pounds, a good 500 pounds lighter than the current Chevy Sonic, so performance with the manual transmission was tolerable. The '86 Sunbird's interior was much nicer than those in its Cavalier siblings, though nowhere near the Cadillac Cimarron's reading on the Plush-O-Meter. An AM/FM/cassette stereo with auto reverse was serious audio hardware in a cheap car during the middle 1980s, when even a scratchy factory AM-only radio cost the equivalent of several hundred 2020 bucks. The price tag of this car started at $7,495, or about $17,500 in 2020 dollars. The cheapest possible Cavalier sedan went for $6,888 in 1986, but a zero-option base '86 Cavalier would make you think you'd been transported to the Soviet Union every time you slunk into its harsh confines. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Bugatti Chiron roadster could be in the works

Regular reversals make it hard to tell what Bugatti will do next. In 2018, the Molsheim, France-based carmaker said it wouldn't go after the 300-mph mark, screaming from the mountaintop that would be "missing a big part of what the [Chiron] is all about." Not even a year later, a modestly reformed Chiron reached 304.773 mph at Volkswagen's Ehra-Lessien test track, the feat spun into the $5.19M Chiron Super Sport 300+ and, more recently, the $580,000 Jacob Twin Turbo Furious 300+ wristwatch. In 2019, Bugatti said "There will be no SUV." Eight months later, Bugatti revealed it had already designed a crossover, and that "some potential customers have seen it, and they liked it." If The Supercar Blog is correct, we could have another take-back on our hands. In 2016, Bugatti pronounced the Chiron would get "no roadster or convertible" version. Since then, the closest accommodation the Chiron makes to open-air motoring is the fixed Sky View roof panels. But TSB sources told the outlet "Bugatti does intend to build" a Chiron roadster. It's not clear if this would be a one-off like the La Voiture Noire or a limited run like the Divo or Centodieci, but TSB states Bugatti is "reportedly gauging interest in a one-of-a-kind open-top variant." A one-off roofless screamer is one of Bugatti CEO Stephan Winkelmann's go-to maneuvers, though. When Winkelmann ran Lamborghini, he commissioned designers to work up the Aventador J roadster for the 2012 Geneva Motor Show, later selling the car's birth as a customer commission. The following year, he presided over the creation of the single-seater, targa-top Egoista for the brand's 50th anniversary. Bugatti has a much deeper roadster tradition than Lamborghini, offering plenty of material to pull from that designers have so far barely mined. With a rumored price of ˆ9 million ($10.1M U.S.), Bugatti's roofless hypercar wouldn't be a 'mere' targa-ficiation of the Chiron mimicking the Veyron Grand Sport. The asking price is a nice condominium beyond the ˆ8 million ($8.9M U.S.) sought for the Centodieci, the EB110 homage limited to ten units, and a good deal less than the $18.7M sum needed for the La Voiture Noire.   If there's any truth to this, guesswork says Bugatti's either doing up a roofless roadster in the vein of the Bentley Bacalar or a speedster in the Ferrari SP1 mold. More detail than that will need to wait until another source pipes up, or Bugatti decides to drop hints.

GM seeks appeals court ruling to continue legal fight with Fiat Chrysler

DETROIT — General Motors on Friday asked a U.S. appeals court to allow it to continue pursuing its civil racketeering suit against rival Fiat Chrysler Automobiles, rejecting a lower court judge's belittling of the complaint. The automaker's filing with the Sixth Circuit Court of Appeals comes less than a week after U.S. District Court Judge Paul Borman called GM's suit against Fiat Chrysler a "waste of time and resources" at a time when both automakers should be focused on surviving the coronavirus pandemic. Borman ordered GM Chief Executive Mary Barra and Fiat Chrysler CEO Mike Manley to meet by July 1 to negotiate a resolution. "As we have said from the date this lawsuit was filed, it is meritless," FCA said on Friday. "FCA will continue to defend itself vigorously and pursue all available remedies in response to GM's groundless lawsuit. We stand ready to comply with Judge Borman's order," it added. In its motion, GM asked the appeals court to throw out Borman's order and reassign the case to a different district court judge. It called Borman's order "unprecedented" and "a profound abuse" of judicial power. GM sued Fiat Chrysler last year, accusing the Italian-American company's executives of bribing United Auto Workers union officials to secure labor agreements that put GM at a disadvantage. Fiat Chrysler is under investigation by the U.S. Justice Department as part of a wide-ranging probe of UAW corruption. GM's accusations came as Fiat Chrysler and French automaker Peugeot were in the early stages of preparing for a merger. Fiat Chrysler has said the suit was aimed at disrupting that deal. GM has said the suit has nothing to do with the merger. In a statement, GM rejected Borman's characterization of the suit as a "distraction" and defended its decision to press the case. "We filed a lawsuit against FCA for the same reason the U.S. Department of Justice continues to investigate the company: former FCA executives admitted they conspired to use bribes to gain labor benefits, concessions and advantages. Based on the direct harm to GM these actions caused, we believe FCA must be held accountable." Related Video: Government/Legal UAW/Unions Chrysler Fiat GM

Junkyard Gem: 1976 Cadillac Eldorado Convertible

Convertibles rode high well in 1960s America, with Detroit selling more than 500,000 ragtops in 1965, but sales collapsed by the early 1970s and tightening federal crash-safety regulations made it seem less worthwhile to even bother producing new ones. Chrysler halted convertible production after 1971, with Ford following suit by 1973. By the 1976 model year, the Cadillac Eldorado was the last new American car you could buy with a convertible top from the factory, and it appeared that none would ever be built again. I've found one of those "last convertible" Eldorados in rough-but-identifiable condition in a Denver junkyard. As it turned out, the convertible never really died in America. Car shoppers could still buy new European-made convertibles after 1976, coachbuilders modified new Detroit cars with factory-grade drop-tops, and then Chrysler began selling K-Car convertibles starting with the 1982 model year. Because the '76 Eldorado appeared to be the absolute end of the convertible line, however, buyers thought they were investing in a sure-fire collector car that would be worth vast sums in the not-very-distant future (this belief led to lawsuits against GM later on, when the Cadillac Division resumed production of the Eldorado convertible for 1984). While a one-of-200-made Bicentennial Edition Eldorado with red-white-and-blue trim really is worth plenty these days, an ordinary 1976 Eldorado in beat-up condition doesn't seem worth restoring. This car appears to have sat outside in Colorado with the top down for decades, filling with snow each winter and enduring high-elevation solar irradiation each summer. A 1960s GTO or Camaro might be worth fixing up after falling into this state of disrepair, but not one of 14,000 "last convertible" Eldorados made in 1976. GM's Unified Powerplant Package front-wheel-drive system, which used battleship-strength chains to transmit power to the drive wheels, proved to be extremely reliable on the street, joining the small-block Chevrolet engine and Hydra-Matic transmission in the pantheon of The General's Greatest Engineering Hits. Even gigantic motorhomes used this system. In 1976, the Eldorado got the last of the 500-cubic-inch (8.2 liter, or litre as GM's marketers spelled it) V8s, rated at a disappointing 190 horsepower and an impressive 360 lb-ft of torque.

Hyundai Group and LG Chem launch EV & Battery Challenge

The chairmen of Hyundai Motor Group and LG Chem sat down recently to explore ideas for collaboration that include a joint venture in Indonesia to produce electric vehicle batteries. One early result of their efforts is the EV & Battery Challenge, a global competition seeking startups with working technologies that will add value to battery development and production, and enhance customer's total EV ownership experience. Broken into two categories of innovation, the contest is looking for battery tech in the areas of management and maintenance, materials, reuse and recycling, and manufacturing and quality control. For electric vehicles, startups with innovations in the EV business model, charging, components, fleet management, and customer service are encouraged to apply. LG held a similar event last year open to new inventions specifically for batteries. Nearly 130 applicants applied from 27 countries. After a Battery Challenge Pitch Day at the LG Magok Science Park in South Korea, the company chose five finalists who received up to $2 million in funding through formal partnership with the conglomerate. LG said it didn't walk away from the 124 candidates not chosen, "continuing to work closely [with them] and offer support in terms of technological evaluation and future investment."    The EV & Battery Challenge dangles the same prizes — financial support and the chance to work in Hyundai and LG facilities with their tools, engineers, and knowledge.  Applicants need to have a non-commercialized working prototype clearly different from what's currently on the market, "strong expertise in the battery and mobility sector," and "a business model based on credible commercial and economic assumptions." The challenge is open from now until August 28. Hyundai and LG will review applications in September, then hold video interviews with a winnowed group in October and November. In November, finalists will be invited to a two-day workshop at Hyundai's CRADLE hub in Silicon Valley, where the automaker bases its innovation initiatives in the U.S.  New Energy Nexus, "an international non-profit that supports clean energy entrepreneurs with funds, accelerators, and networks," is overseeing the EV & Battery Challenge. The potential reward for LG is finding a mythical piece of battery tech to counter the million-mile packs supposedly on the verge of release from China's CATL or U.S.

Junkyard Gem: 2004 Pontiac Vibe GT

The New United Motor Manufacturing plant in Fremont, California, built Toyota-derived machinery — badged as Toyotas, Chevrolets, Geos, and Pontiacs— from 1984 through 2010, and some of the very last vehicles that left the assembly line were Pontiac Vibes. The Vibe, sibling to the Toyota Matrix, mostly served as a ho-hum transportation appliance and/or fleet car, but a factory-hot-rod GT version could be purchased. Today's Junkyard Gem is one of those rare GTs, complete with the nearly unheard-of six-speed manual transmission, found in a self-service yard in northeastern Colorado. The regular Vibe had 123 or 130 horsepower, depending on the number of driven wheels, but the Vibe GT got the same 1.8-liter 2ZZ engine that went into the Celica GT-S. 180 horsepower, which was enough to make the 2,800-pound Vibe GT keep up with the 3,108-pound/215-horse Chrysler PT Cruiser Turbo that year. Sadly, no race series pitting Vibe GTs against PT Cruiser Turbos and Chevy HHR SSs on road courses ever materializedÂ… but it's not too late. The Vibe GT has something you couldn't get in a PT Cruiser or Chevy HHR, though: a six-speed manual transmission as standard equipment. In fact, the six-speed was the only transmission offered in the early Vibe GTs (an automatic became an option later on). You'll find plenty of three-pedal econoboxes from this era, because they were significantly cheaper than their slushbox-equipped counterparts, but the Vibe GT had plenty of competition from sportier-looking cars with manual transmissions in 2004. Not many were sold. This car is covered with nasty dents from golf-ball-sized hail (all too common in High Plains Colorado), so it may have been an insurance total that nobody wanted at auction. Sold in Wyoming, will be crushed in an adjacent state. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Fuel for the soul. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The kids, they were crazy about the Vibe (well, maybe not). This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Toyota had right-hand-drive Matrixes brought over to Japan from Canada, but a NUMMI-built version of the Vibe could be purchased there for a few years as well. This was the Voltz, and its advertising seems notably frantic even by the standards of Japanese car commercials.

Maserati hand-painted tricolor stripe shows Italian pride — for a price

Italy has gone through a rough time with the coronavirus, but now the country is emerging from the worst of it and is experiencing a renewed sense of national pride. Rome's famous Colosseum is illuminated in the green, white and red of the Italian flag, and Maserati is getting into the spirit as well. The company is offering a narrow tri-color stripe in the same green-white-red on the hood and roof of new Maseratis. Waving the proverbial Italian flag with your Maserati doesn't come cheap, however. The option is $5,000, although we should point out that it is hand-painted. The stripe is available on a small number of 2020 model year Levantes and Ghiblis exclusively in conjunction with the Nero Ribelle (metallic black) body color. We're told the special stripe will be offered more widely as a special-order option for 2021, where it can also be paired with other body colors. Pricing for the 2021 model year has not been released. Related video:    

2021 Ford F-150 goes hybrid and we drive the Cadillac CT4-V | Autoblog Podcast #633

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor, Green, John Beltz Snyder and Associate Editor Byron Hurd. They start with the big news of the week: Ford unveiling the 2021 F-150, complete with a powerful hybrid powertrain. The guys have been driving some eclectic vehicles, including the Cadillac CT4-V, Toyota Prius AWD-e and a 1967 VW Samba Microbus. To finish things off, Greg springs a few trivia questions on his guests. We'll post those in the comments, and you can see if you'd have gotten those right. Autoblog Podcast #633 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown 2021 Ford F-150 revealed Read more about the heavy-hitting hybrid Cars we're driving: 2020 Cadillac CT4-V 2020 Toyota Prius AWD-e 1967 Volkswagen Samba Trivia Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video:

Maserati switching to in-house twin-turbo V6 and turbo four

Automotive News has been able to put some output figures to the two primary engines that will power Maserati's renaissance. Last year the Italian luxury brand sent notice that it would terminate its deal to with Ferrari to use the Maranello-sourced F160 3.0-liter twin-turbo V6 and F154 3.8-liter twin-turbo V8. As new Maserati models appear and current models are overhauled, the brand will begin installing either Maserati's own 3.0-liter twin-turbo V6, or an FCA-sourced 2.0-liter turbocharged four-cylinder. The V6 will greet the world from the middle of the MC20 supercar poised for debut in September, assuming nothing goes worse with the world than it already has. Rumor from Mopar Insiders and Allpar forums is that Maserati began building its V6 based on Alfa Romeo's 690T V6. Alfa Romeo puts the 690T in the Stelvio and Giulia Quadrifoglio, the engine's development having started seven years ago with Ferrari's F154 V8 as its heart. Tuned for speed, peak output could reach 542 horsepower. After making its home in the racy coupe, the V6 will also serve a new midsize Maserati crossover coming next year, as well as the next GranTurismo coupe and GranCabrio convertible. In the crossover, power is apparently limited to no more than 523 horses. In Maserati's new V6, one piece of technology that permits such high output and emissions friendliness is turbulent jet ignition (TJI). German supplier Mahle has been developing the technology for at least 10 years, and put it to use in Ferrari's Formula 1 engine about five years ago, after which Japan's Super GT manufacturers picked it up. Instead of a spark plug igniting fuel directly in the combustion chamber, TJI places the spark plug and an injector nozzle at the top of a "jet ignition pre-chamber assembly." The injector shoots a mist of gasoline into the pre-chamber, the spark plug fires, and the force of ignition in the pre-chamber sprays the combustion through tiny holes at the bottom of the pre-chamber into the cylinder as the piston rises. Mahle says the shorter burn and improved combustion spread means cleaner-burning gas engines that emit fewer emissions.   AN says that the "new V-6 engine will be 'electrified' in some form." It's not clear if that means all versions of the V6 will get some sort of hybrid assistance, or if — as had been thought — there will be a non-hybrid unit.

The 2021 F-150 elevates Ford's bed game

The new 2021 Ford F-150 is ushering in a new era of pickup capability, but there's more to it than the introduction of the PowerBoost hybrid. While that new powertrain is certainly the truck's headlining element, the supporting electrical architecture enables a level of utility that hasn't been offered in past consumer half-tons. The true party trick is Ford's new "Pro Power Onboard" feature, which is essentially a built-in generator that provides juice for the 2021 F-150's rather robust in-bed power station. This system is available even on gasoline-engine models, but its utility is maximized with the electrified powertrain. ICE models equipped with the option max out at 2.0 kilowatts, while the PowerBoost hybrid can be had with either a 2.4- or a whopping 7.2-kilowatt inverter.  The idea here is that the F-150 can essentially stand in for a high-output portable generator. In a worksite example provided by Ford, a PowerBoost model with the 7.2-kW upgrade and a single tank of fuel could provide 32 hours of power for an 1,800-watt compound miter saw, a 1,000W circular saw, a 1,200W battery charger, a 1,200W hammer drill, and a 1,000W air compressor with hundreds of watts to spare for lighting and other accessories. But even without the Pro Power Onboard option, Ford's new bed setup enables more versatility than in previous models. The new Tailgate Work Surface option adds a flat work area with integrated rulers, recesses for pencils or small tools, and even a stand for a personal device.  Ford is neither the first to offer an auxiliary power outlet in a half-ton pickup bed, nor was Ford the first to introduce a more feature-rich tailgate. GMC's MultiPro tailgate was a major innovation on that front, and while it is geared mostly toward improving the cargo utility of the bed, it can also be customized with 12-volt power and even an accessory speaker system. The Ram 1500 is also offered with both a multi-function tailgate and AC power in the bed, though the latter option is limited to models with the RamBox cargo package.  As half-ton pickups approach levels of towing and hauling capability that begin to blur lines with heavy-duty offerings, it's clear that automakers are looking for ways to differentiate themselves without stepping on their own bigger trucks' toes. These new bed and tailgate innovations may yet be the tip of the iceberg when it comes to full-size pickup versatility. Related Video:    

2021 Subaru Ascent adds standard lane-centering, lane-keep assist, and adaptive headlights

The 2021 Subaru Ascent, the brand's three-row midsize SUV, adds lane-centering (which works in conjunction with the adaptive cruise control) and lane-keep assist to its standard-equipment list. Curve-adaptive headlights are newly standard on the base and Premium trims. With the additional equipment, the Ascent's starting price increases by $300. The new features join the existing EyeSight roster of active-safety features, which includes forward-collision warning with automatic emergency braking, lane-departure warning, and adaptive cruise control. Blind-spot monitoring and rear cross-traffic alert remain optional on the base trim and standard elsewhere. Prices for each trim level are as follows: Base Ascent $32,295, an increase of $300 versus 2020. Ascent Premium $34,795, an increase of $400. Ascent Limited $39,595, an increase of $200. Ascent Touring $45,445, an increase of $400. (All prices are exclusive of destination charges.) As before, the Premium offers four option packages, and the Limited offers three, effectively making for 11 different levels of equipment. All Ascents come standard with three rows of seating. The base, Premium and Limited have a second-row bench and a total seating capacity of eight. The Touring seats seven with a second-row captain's chairs, which can be optioned on the Premium and Limited. The Ascent's sole powertrain is a 260-hp 2.4-liter boxer four paired with a CVT and all-wheel drive. Fuel economy is 21/27 mpg city/highway (20/26 mpg on models with the larger, 20" wheels). The Subaru Ascent competes against the Honda Pilot, the Nissan Pathfinder, and the Toyota Highlander, among many others. Related video:    

Kia's Intelligent Manual Transmission — here's how iMT and clutch-by-wire works

When Kia introduced the facelifted Rio for Europe a few weeks ago, the press release briefly touted a clutch-by-wire six-speed manual transmission that would improve gas mileage and reduce CO2 emissions. A new press release provides details on the Intelligent Manual Transmission (iMT), which we find a surprising avenue of innovation designed just for mild hybrids. Traditional and dual-clutch automatic transmissions, thanks in part to more gears and programmed repeatability, already perform better than human drivers shifting for themselves in metrics including gas mileage. Kia's head of powertrain in Europe said the automaker developed the manual just because "European drivers in particular still love changing gear for themselves." With the pressure on budgets and on standard gearboxes even before the current travails, this seems a benevolent gesture. The traditional linkage from clutch pedal to gearbox goes AWOL in the iMT, sensors on the pedal lever controlling clutch actuation electronically. And an iMT-equipped Kia can take over control of the driveline even when the vehicle is in gear. For example, when a driver takes his foot off the accelerator as he approaches a stoplight, the iMT tells the mild hybrid system to turn off the engine, as it disengages the clutch. Normally, many drivers use coasting in gear in this situation as a way to slow the car without pressing the brake pedal. Kia's system has "the open clutch limiting deceleration and allowing the car to make the most of its kinetic energy," which will mean rethinking one of the finer points of transmission use. If the driver presses the accelerator or brake during the coast, the integrated starter-generator (ISG) restarts the engine. Assuming speed hasn't dipped too low for the chosen gear, the iMT engages the clutch and the driver resumes in the gear the Kia was left in. The hybrid system supplies a boost to get engine revs back up to speed in order to avoid bogging. If vehicle speed is too low to avoid bogging in the current gear, the iMT will disengage the clutch so the car effectively restarts in neutral while in gear, and the driver adjusts.

Cadillac Lyriq electric crossover reveal date announced

The Cadillac Lyriq will be the company's first fully electric car, and it was due to be shown back in April. Then the coronavirus pandemic happened and screwed everything up. But now we have a new reveal date for the Lyriq: August 6, 2020.    The date comes to us via a teaser video. It showcases a variety of high-tech Cadillac features over the decades from electric start to OLED instrument displays. But it also occasionally drops a shot of the Lyriq itself. One shot shows part of the grille, which is solid with many LED light strakes. We also see the door panel with beautiful wood trim and inlaid LED patterns. Autoblog Green editor John Snyder has already seen the Lyriq at GM's electric vehicle summit. He noted that it has 22-inch wheels, tall taillights, and a 34-inch instrument and infotainment display spanning the width of the dashboard. 

Mazda seemingly confirms turbo Mazda3, plus reveal date

Yes, you read that right, Mazda seems to have confirmed that a 2021 Mazda3 turbo is on the way. The company replied to multiple tweets asking about such a car, including one from yours truly, with a teaser video and the phrase "Power comes to those who wait." This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.   That context is important since the teaser doesn't say anything explicitly. It does have a soundtrack of a mean sounding four-cylinder. It also has a date: July 8, 2020. So we should see the car in just a couple of weeks. Many reports have circulated about the turbo Mazda3. The most recent asserts that it will be available in both sedan and hatchback variants, but that it may only come with an automatic transmission. The engine will probably be the same turbocharged 2.5-liter unit from the Mazda6, CX-5 and CX-9, which makes 250 horsepower and 310 pound-feet of torque. That would put it in close proximity to the VW GTI and Subaru WRX. We'll be curious if Mazda also offers all-wheel drive, since it's available with the turbo engine in the CX-5 and CX-9. Odds are the car will also be tuned and marketed as a more mature vehicle than other hot hatches or the old Mazdaspeed3. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.      

2021 Ram TRX to be revealed this summer

The wait for the 2021 Ram TRX will soon be over, FCA confirmed Thursday with a social media teaser. The much-anticipated, Hellcat-powered Raptor slayer will be revealed this summer.  This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Ram teased the unveiling on Twitter with a short video of the truck kicking up a massive desert dust cloud overlaid with the TRX badge and the caption, "It’s not a mirage." Make sure you enable sound, because the clip has audio, and you can hear the beating heart of the TRX — the same 6.2-liter supercharged V8 that powers FCA's Dodge Hellcat and Jeep Trackhawk models.  The engine sound in the clip lends credibility to a previous spy video purporting to show a group of TRX prototypes testing in Michigan's Silver Lake Sand Dunes.  This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The link in the tweet leads to a microsite which replays the same short clip but offers no additional information, which tracks with the slow-drip approach Ram has taken with teasing out its new truck. Much of what we know (or believe to be true) has come from unconfirmed sources and spy shots, but Ram has acknowledged that the Hellcat powerplant will make more than 700 horsepower, rather than the 500-some-odd figure originally expected.  From the above shots, we can tell the TRX will sport bulging box flares (a la Raptor) front and rear. The hood appears to be equally bulging, good for highlighting the supercharged V8 underneath. The front bumper is similar to that of the Ram 1500 Rebel's with more raised sections in front of the tires to provide more clearance. Ram 1500 TRX View 18 Photos We get a solid look under the body, too. Still present are the extra beefy suspension control arms front and rear. Skid plates seem to line the whole underside down the middle. The tires were Goodyear Wrangler all-terrains, though it was difficult to make out the actual size. Previous spy photos have revealed remote-reservoir shocks. The wheels at each end are six-lug units, so it seems Ram isn't playing with a heavy-duty axle like a previous prototype suggested. Whatever the case may be, we should be no more than a couple of months away from getting the official details on Ram's new Raptor competitor.  Related Video:    

The Bentley Mulsanne exits the stage as production ends

Bentley is done with the Mulsanne. The one you’re looking at here is the penultimate car to come out of the factory in Crewe, Cheshire, England. Apparently, the owner of the last one is rather secretive and wants to keep their car under wraps. That being the case, Bentley has surrounded this Tungsten and Rose Gold Mulsanne with all the pomp and circumstance one would expect from the end of an era at Bentley. At least, as much as the pandemic will allow. Bentley employees are pictured here next to the car, standing apart with masks on. ItÂ’s one of the Mulsanne 6.75 Edition cars Bentley previously announced, which the company limited to just 30 units. The end of the Mulsanne also means the end of the 6.75-liter V8 at Bentley. We gave that engine its own sendoff post, but needless to say, the engine series is an old one and can be traced back to 1959. BentleyÂ’s Mulsanne is much less old. This flagship sedan was introduced at Pebble Beach in 2009, and has been in production ever since. Bentley has given it a couple rounds of updates, with the addition of the faster Mulsanne Speed in 2015, along with a design and tech refresh in 2016. Bentley built just over 7,300 total Mulsannes, and itÂ’s released a few eye-popping production stats. In the end, about 700 people were part of the production process to build the Mulsanne, putting in nearly 3 million total hours. Over a million total hours have been spent creating the interiors, and nearly 90,000 hours have been spent polishing the cars.  “I am immensely proud of the hundreds of designers, engineers and craftspeople that brought the Mulsanne to life over the last 10 years,” said Adrian Hallmark, Bentley CEO. “Now, as we begin BentleyÂ’s journey to define the future of sustainable luxury mobility through our Beyond100 strategy, the role of Bentley flagship is passed to the new Flying Spur.” ThatÂ’s right, the Flying Spur is the new flagship for the time being. Though, the latest rumors point to Bentley making a gigantic SUV as its future flagship vehicle to properly replace the Mulsanne. Is anybody surprised? Related video:

Eagle Lightweight GT meticulous Jaguar restomod is 'the best an E-Type can be'

England claims so many boutique, specialist car companies doing such sensational work that if an artist were to draw a national muse for Britannia, she would hold a scepter in one hand and a gear shift in the other. Next up in the island's crowded showroom of posh vehicular gems, Eagle presents its Lightweight GT. The slinky coupe started as a Series 1 Jaguar E-Type (built from 1961 to 1968), then, after 8,000 hours of work in the chrysalis of Eagle's East Sussex workshops, the coupe emerges as a modern and much more comfortable version of Jaguar's factory Lightweight racers from 1963. Some context: After Jaguar stepped away from racing in the late 1950s, the company decided to convert 25 incomplete D-Type chassis into the road-legal XKSS roadster. Come 1962, with the D-Type and competition still on its mind, Jaguar toyed with its new E-Type road car to create the Low Drag Coupe for competition. The factory built just one, powered by a mightier version of the 3.8-liter straight-six in the E-Type that used a wide-angle cylinder head designed for the D-Type. The next year, Jaguar's racing fancy expressed itself in the E-Type Lightweight, still harking back to the D-Type with all-aluminum bodywork and an aluminum block for the 3.8-liter. The automaker planned to fabricate 18 Lightweights, but only got around to building 12. The Lightweights didn't dominate any of the big races, but privateers put them to effective use in smaller series. Their pedigree, aura, and multi-million-dollar valuations convinced Ford to debut an Advanced Lightweight Coupe Concept at the 2005 Geneva Motor Show, and in 2014 convinced Jaguar to complete the six remaining cars in the 18-car build.      Enter Eagle. After its Speedster, Low Drag GT and Spyder GT, the firm calls the Lightweight GT the answer to the question, "What’s the best an E-Type can be?" The hand-formed aluminum skin takes 2,500 hours to shape, revised slightly for better aerodynamics and comfort. A deeper ramp angle in front leads to deeper side sills, which bolster chassis stiffness, and with a lower floorpan, put the driver lower in the car and give him more headroom. Larger wheel arches fit 16-inch magnesium alloy versions of the peg-drive wheel Dunlop introduced in 1954, an inch larger than the wheels on the original Lightweights, and aluminum, three-eared knock-offs. There's steeper rake to the windshield and backlight.

2020 Lotus Evora GT Road Test | Don’t forget about Lotus

Slipping into the leather, carbon fiber-backed seats and turning on the engine is an event in the 2020 Lotus Evora GT. Stick the stubby, unmarked key in the ignition, turn two notches; press a button on the remote; push the clutch in, and hold the “Engine Start” button down. The tachometer springs to life, zinging up past 2,000 rpm before settling into an even, but emphatic idle. If everybody wasnÂ’t already staring at the little British sports car in the parking lot, they are now. Once the astoundingly complex, but charming start procedure is done, the fun begins. Lotus has sold only one other more powerful version of the Evora in the United States, that being the GT430. This GT is rocking a poked and prodded version of the Toyota 3.5-liter V6 engine found in all Evoras, but as in some other versions, an Edelbrock supercharger has been added to boost output. With the six-speed manual, its output is 416 horsepower and 317 pound-feet of torque. Twist increases to 332 pound-feet with the six-speed automatic, but donÂ’t buy a Lotus with an automatic. Just donÂ’t do it.  The gear lever snicks into first with positive, notch-like action. LotusÂ’ analog gauges stare back, displaying the most important information in a legible size and font. ThereÂ’s a digital speedometer tucked into a little nook under the steering wheel's red center line, just the right height for a quick glance downward. Grippy leather covers the 9 and 3 positions on the wheel, while soft Alcantara contrasts with the leather on the top and flat bottom of the wheel. Lotus clearly knows that sweaty racetrack hands and Alcantara donÂ’t mix.  This clutch is heavy, is the first thought upon setting out on the road. It fits the car and makes the driver work a little to be smooth. Good. Driving a Lotus shouldnÂ’t be a walk in the park. The driving position is bang-on. Those manually-adjustable (and heated!) leather seats are mounted low, their bolsters large enough to be snug, but short enough to slip over getting in. The view forward doesnÂ’t leave much to be desired, but looking out the back is like looking through a mail slot. ThereÂ’s a tiny box of glass, but itÂ’s tinted, making it difficult to see whatever might be visible. Side mirrors it is, and those are plenty fine, even allowing a view of the wide rear hips.  At speed, racecar vibes abound instantly.

Junkyard Gem: 1984 Jaguar XJ-S with Chevrolet V8 swap

If you wanted to do some conspicuous consumption during the 1980s, you couldn't do much better than the Series II Jaguar XJ-S. A big, decadent-looking coupe with a smooth V12 engine under its vast bonnet, a new XJ-S would have been just the thing to celebrate a fresh round of S&L looting or a Stinger missile deal with Adnan Khashoggi in 1984. The XJ-S cost plenty to keep running, though; when the third or fourth owner got tired of huge repair bills for V12 problems, a small-block Chevy V8 engine often got swapped in. Today's Junkyard Gem in Denver is such a Jag, with an early-1990s Chevy 350 residing in the engine compartment. While the good old Chevy 350 didn't purr quite as silently as the nicely balanced 5.3-liter V12, it got the job done. Some junkyard shopper had already grabbed the heads off this engine before I got to it. The block casting number indicates that the engine began life in a 1987-1995 car or truck. The small-block Chevy is a common swap for Jaguar XJs, going back to the 1960s.  The cylinder-head buyer tossed the heavy intake manifold on the roof, which would be a junkyard no-no on a nice car. This car's body isn't so nice, though. It appears that some sort of aftermarket hood scoop once lived atop these layers of body filler and pop rivets. The interior looks decent enough, though the varnish on the dashboard wood shows signs of excessive Colorado sun exposure. The MSRP on this car began at $34,700, or about $87,300 in 2020 dollars. You could get a new Cadillac Eldorado Biarritz coupe that year for just $23,737, though the real competition for the XJ-S was more likely to be a Mercedes-Benz S-Class or BMW 6 Series with two doors. The 1984 BMW 633CSi went for $39,120, while the Mercedes-Benz 500SEC cost a staggering $56,800 that year. How the mighty have fallen! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. You can't buy the race car, but you can buy V12 power wrapped in soft leather and paneled in rare wood. Featured Gallery Junked 1984 Jaguar XJ-S View 22 Photos Auto News Jaguar Automotive History Coupe Junkyard Gems

Jaguar Classic's 3.8-liter engine block costs nearly as much as a new Jetta

Jaguar is helping collectors restore its vintage models by resuming production of the 3.8-liter six-cylinder engine block it built between 1958 and 1968. Called XK, the straight-six originally powered half a dozen models (including the famous E-Type), and its modern recreation costs nearly as much as a new compact sedan. Wearing part number C22250, the cast-iron block is built to the original's specifications by Jaguar's Classic division, and it comes with a 12-month warranty. Sourcing a used block would likely be markedly cheaper than ordering a new one from the factory, but enthusiasts who value originality above all will appreciate the fact that it comes certificate of authenticity. Customers who send the company proof of vehicle ownership can even retain the serial number from the engine they're pulling out, though an asterisk will identify it as a replacement. Jaguar built the XK engine for several decades, but the 3.8-liter variant only remained in production for 10 years. It powered cars like the surprisingly quick XK 150 roadster, the stately Mark IX and early examples of the E-Type, though its displacement grew to 4.2 liters in 1964. As of this writing, only the 3.8-liter XK is available new. If the E-Type you're painstakingly restoring deserves nothing less than the best, or if you think a 3.8-liter block makes an awesome coffee table, you'll need to send Jaguar a check for GBP14,340 including taxes, a sum that represents approximately $17,800 at the current conversion rate. Enthusiasts will also need to source pistons, connecting rods, a crankshaft and a complete cylinder head, among many other parts, so the cost of a full rebuild will lie well beyond the $20,000 threshold. For context, Volkswagen charges $18,895 for an entry-level Jetta. Related Video:

J.D. Power 2020 Initial Quality Study puts Dodge and Kia in first place

For the first time ever, an American automaker is ranked at the top of J.D. Power's yearly Initial Quality Study as Dodge tied with Kia for the top spot. Kia landed in first from second place last year — though it's Kia's sixth consecutive year as the top-ranked "mass market" brand — while Dodge jumped an impressive seven spots to move into a tied first from eighth in the 2019 edition of the study. Dodge is one of seven domestic automakers that find themselves in the top half of J.D. Powers' 34th consecutive IQS study. Dodge and Kia's score of 136 problems experienced per 100 vehicles (PP100) puts them ahead of Chevrolet and Ram (141 PP100), Genesis (142 PP100), Mitsubishi (148 PP100) and Buick (150 PP100), which make up the top five after accounting for tied scores. GMC, Volkswagen, Hyundai, Jeep and Lexus round out the top 10. As you probably noticed, Mitsubishi and Lexus are the only Japanese brands to make it into the first 10 spots, and Genesis took home the award as the top-ranked premium brand. This is the first year that J.D. Power released data on the survey results from Tesla owners, and it's not good news for the California-based electric vehicle manufacturer. With an adjusted score of 250 PP100, Tesla is in dead last place on the 2020 IQS Study, just behind Land Rover's score of 228 PP100. It's worth noting that Tesla's score isn't an official entry into the IQS study because surveys were only available in 35 states as the company is the only automaker that has not granted J.D. Power permission to survey Tesla owners in the 15 other required states. According to J.D. Power, about a third of all problems reported by owners of 2020 model-year vehicles within the first three months of ownership relate to issues with infotainment and technology. In many cases, the high-tech systems aren't broken, but are difficult for owners to use or don't work as well as they should. Those issues are "just as severe as other problems," according to Dave Sargent, vice president of automotive quality at J.D. Power, especially since a "customer is stuck with this [issue] for the rest of the time they own the vehicle." J.D. Power surveys the owners of new cars with a questionnaire that covers 223 problems organized into nine categories: climate, driving assistance, driving experience, exterior, features/controls/displays, infotainment, interior, powertrain and seats.