Blog

2020 Lincoln Corsair Review & Buying Guide | Old-school, value-priced luxury

The 2020 Lincoln Corsair is a compelling alternative to the compact luxury crossover establishment. It’s distinctively stylish inside and out, very spacious, and it clearly focuses on comfort rather than performance. Not only that, it has a base price that's thousands of dollars cheaper than its German rivals. It has a couple of drawbacks. Its quest for comfort does sacrifice some of its handling capability, and its overseas rivals still have nicer cabin materials. But there are enough positives that youÂ’ll still want to give the Corsair a closer look. What's new for 2020? The Lincoln Corsair is a completely new model introduced this year. It replaces the Lincoln MKC, and like that crossover, the Corsair still shares its platform with the Ford Escape. 2020 Lincoln Corsair Beyond Blue interior View 9 Photos What's the Corsair's interior and in-car technology like? While the Corsair is based on the Ford Escape, you wouldnÂ’t be able to tell from the inside, and thatÂ’s a very good thing. The little Lincoln crossover has a unique interior, both in relation to the Escape and to the rest of its luxury segment. There's nothing remotely like it. The dashboard itself is low and wide, emphasized by the split-level design and the faux full-width air vent. The center stack has a cantilevered design that floats above the center console area and features chrome-plated switches and knobs. Base models get a stylish pinstriped aluminum trim panel on the dash paired with one of three upholstery color options including black, gray and beige. However, the Reserve steps things up considerably with differing wood and metal trim choices that correspond to the expanded leather color options that include a camel tan and dark turquoise (pictured above). All Corsairs get an 8-inch touchscreen infotainment system mounted high on the dash within easy sight and reach. It uses a reskinned version of the latest Ford SYNC interface. The layout is straightforward and easy to navigate, and the more muted color options on the Lincoln system are easier on the eyes than the stark white Ford version. ItÂ’s a little bit slow to load new menus, though, and this carries over to the optional 12.3-inch instrument cluster screen available on the Reserve trim. The Corsair comes standard with an analog instrument cluster with a 6.5-inch info screen. We appreciate that many stereo and climate controls have dedicated switches and knobs on the center stack, and they have a nice heft to their actions.

Junkyard Gem: 1985 Bertone X1/9

Sales of the Fiat X1/9 began in the United States in 1974, and the price tag was very reasonable for a mid-engined Italian two-seater. For a time, these cars were common sights on American streets, at least in non-rusty areas. Then Americans became disillusioned with the Fiat brand, and the company folded its tent and departed the continent after 1982, not returning until 2010. Automotive dealmaker Malcolm Bricklin saw an opportunity at that point, and his company began bringing in 124 Sport Spiders badged as Pininfarinas and X1/9s badged as Bertones. Here's an '85 Bertone in a California wrecking yard. Fiat had hired Bertone to design the X1/9 in the first place, so the badging change wasn't so jarring to those Americans familiar with the car's history. Bricklin introduced Subaru cars to the United States in the late 1960s, started his own car company in the middle 1970s, then went on to bring a Yugoslavian-built Fiat 127 variant to these shores, via the same company that was already bringing in the X1/9. Power came from what amounted to a Fiat 128 engine/transaxle assembly, mounted just behind the rear window. In 1985, the Bertone X1/9 had 75 horsepower and weighed just over a ton. This car still has the allegedly valuable hardtop. I'm pretty sure that every American X1/9 owner has several of these stashed away by now. Optimistically, Bertone used a six-digit odometer in this car. 188,285 miles would have been pretty respectable in a 1985 Corolla, never mind a Fiat known for shaky electrical systems and poor build quality. I still see quite a few X1/9s in the big self-service wrecking yards, and even more 124 Sport Spiders. The seat upholstery is very stylish. I checked this car's VIN on the California smog-check database, which shows that it last passed the emissions test in 2009. Perhaps something broke soon after that and the car awaited repairs that never came. It has both a trunk and a frunk. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Just a thing for a nice leisurely drive on a salt flat.

Mitsubishi Shogun Sport SVP Concept is the offroad Mitsu we want

The Mitsubishi Shogun Sport SVP Concept just debuted at the Commercial Vehicle Show in the U.K. For those unaware of the Shogun Sport's origins, it's a Mitsubishi Triton-based SUV with truck-like off-road capability. This concept raises the bar for what's possible with this big SUV when the terrain gets rough. Mitsubishi and some aftermarket suppliers have given the truck some impressive modifications. For one, it has a 40 mm wider track and new offroad suspension. Walkinshaw Performance Limited and Koni both helped with new components and the suspension tuning. BF Goodrich all-terrain tires wrap new Predator 18-inch off-road wheels with a red outer rim design. Then to give the sides of the Shogun Sport more clearance while rock crawling, Mitsubishi fitted raised side steps finished in black. Other trail-ready add-ons include the big LED light bar and rally-style PIAA driving lamps on the grille. Mitsubishi has changed up the design a bit by adding a new colored grille, massive decal package and a big hatch lid badge. The interior gets a few new bits like heavier bolstered seats, red LED mood lighting and special patterns used throughout. Of course, we don't get the Shogun Sport in the United States. This concept happens to use Mitsubishi's 2.4-liter turbo-diesel four-cylinder, which makes 181 horsepower and 317 pound-feet of torque. Mitsubishi has recently talked about a return to trucks in America, but nothing certain is in the pipeline for now. Meanwhile, we just got our first look at Mitsubishi's smallest new crossover yesterday, the 2020 Outlander Sport.

2020 Mitsubishi Outlander Sport shows its big, new face in America

The 2020 Mitsubishi Outlander Sport initially showed us its new sheetmetal at the Geneva Motor Show, but we got a chance to check out the vehicle in the flesh at the company's research and development center in Ann Arbor, Mich., today. Nearly everything we learned about the Outlander Sport (known as the ASX in other markets) before applies to the North American version of the vehicle. However, one aspect we were uncertain of was the continued presence of the manual transmission. We asked, and Mitsubishi is officially dropping the stick shift version of the Outlander Sport with this update. It was previously only available on the base trim level, exclusively paired with the 2.0-liter four-cylinder engine. Mitsubishi was one of the last holdouts to offer a manual transmission option in the small crossover market, and now they're officially out. Three-pedal versions of the Outlander Sport represented just 2% of total model sales, so the business case just wasn't there anymore. We confirmed that the powertrains from the 2019 model year car will carry over to the 2020 Outlander Sport, which means you'll have the choice between the 148 horsepower 2.0-liter or the 168 horsepower 2.4-liter four-cylinder. Both engines are paired to a CVT. Of course, all-wheel drive will also continue to be available optionally. The big changes are in the styling that Mitsubishi thinks will make it stand out among competitors. Looking at the crossover directly in the face gives us a real truck-like and rugged vibe. This is where Mitsubishi put most of its eggs, appealing to folks who want a tougher looking vehicle. To our eyes, the execution comes off as a bit haphazard, lacking in cohesiveness with the sheer number of things going on. There's gray satin plastic, piano black plastic and flat black plastic all hanging out next to each other. Then the "shield" sort of juts outward at us, standing in stark contrast with the shiny reflective surfaces on either side of it. Judge for yourself, but the previous design was slick and much simpler than this mash up. Mitsubishi kept things relatively subdued out back, and we like the evolution of the taillights and rear bumper here. There isn't much to speak about down the sides other than a different wheel design and a small fake vent added. One could argue the interior was the Outlander Sport's sorest point, but sadly Mitsubishi chose to neglect this part of the car.

Mary Barra reportedly confirms GM's electric pickup truck plans

According to Motor Authority, CEO Mary Barra confirmed General Motors' intentions to build an electric pickup truck this week. Whether or not it would be an all-new vehicle is unknown. The news comes not even a week after Ford announced a $500 million investment in electric-vehicle startup Rivian. First, electric powertrains were integrated into cars. Then came the crossovers and the SUVs. Naturally, then, the next wave will be pickup trucks. Ford is set to produce an electric F-150, Rivian has the R1T, and now General Motors has reportedly confirmed its plans to introduce a competitor into the field. The article says the topic was brought up in a recent investor call as part of a brief overview of the automaker's electrification strategy. That's where the details end, however, as there is no indication of a timeline, what GM brand would carry the truck, or whether it would be an entirely new product or an adaptation of a current model. The latter seems most likely, which points to the Chevrolet Silverado or the GMC Sierra as possibilities. Chevrolet has been GM's electrification leader this decade with the Bolt and Volt, so an electric Silverado would align well with that messaging and branding. However, an electric pickup would likely be a pricier premium product, which could align it better with GMC. Autoblog has reached out to GM for comment and will update this space when we get a response. Green Rumormill Chevrolet GMC Truck Electric Future Vehicles Mary Barra electric truck chevrolet silverado

Maxwell RHEV Prototype First Drive Review | More than meets the eye

The Maxwell RHEV looks just like any small business' panel van, sporting large vinyl graphics and unassuming steel wheels. You'd have no idea that the co-founders of the startup based out of Seattle had grafted a salvaged Voltec powertrain from a junkyard Chevy Volt into this Ram ProMaster. Somewhere, a battery pack lurks. Maxwell's co-founders, CEO Max Pfeiffer and engineer Trey Camp, open the cargo area to reveal a completely unaltered space. Both are ex-Tesla employees with a long fascination for the #vanlife movement – that their interests intersected in a hybrid cargo van isn't surprising once you start talking to them. This is their first vehicle, a salvaged ProMaster sidelined with a blown 3.6-liter Pentastar, and it's both their prototype and the only Maxwell in existence right now. That said, the company is building a low-roof version for a customer, which will be lighter, have less aero drag and therefore be more efficient. The company is just emerging from a stealth startup mode, and while their backstory is fascinating, I'm still wondering where the Volt's 18.4 kWh battery pack is. "There's nothing in the back ... we're able to get the battery underneath the floor, in the center," Pfeiffer says. Ducking my head under the side reveals, sure enough, a little underside blister that contains the battery, tucked up neatly. The other changes to the RHEV – short for Range-extended Hybrid Electric Vehicle – are minimal. He pops the hood. There are some rough edges, but the 1.5-liter, 101-horsepower engine and 48-kW motor fit comfortably on custom engine mounts and with re-routed exhaust, behind a fascia that improves aero and houses the charge port. Custom axles send power to unaltered Ram hubs and brakes. "This version, it's a little bit prototype-y," Pfeiffer says. "We've had more time to work with the CAD [computer-aided design, engineering drawings] we were able to get from GM and Chrysler, and we've done a better job packaging for production." GM already spent billions on the Voltec and its controlling software, and Maxwell can happily ride those coattails. Despite the help GM has lent Maxwell, there are no official ties. An emulator sends spoofed signals to the Ram instruments, which have a new custom-printed face. The Ram's body control module is left alone. For powertrain faults, Maxwell says the vehicle can theoretically be serviced by any Chevy dealer, and any issue with the rest of the vehicle can be handled by a Ram service shop.

UK car output falls 14% in March, may get worse with no-deal Brexit

LONDON — British car output fell for the 10th month in a row in March, hit by a slowdown in key foreign markets, and the sector stands to suffer a lot more if the country leaves the European Union without a deal, an industry body said on Tuesday. Output tumbled by an annual 14.4 percent to 126,195 cars in March, the Society of Motor Manufacturers and Traders said. Exports, which account for nearly four out of every five cars made in Britain, were down by 13.4 percent. The SMMT said analysis it had commissioned predicted output would fall this year to 1.36 million units from 1.52 million in 2018, assuming London can secure a transition deal with the EU. If Britain has to rely instead on World Trade Organization rules for its trade with the bloc, which include import tariffs, output is forecast to fall by around 30 percent to 1.07 million units in 2021, returning to mid-1980s levels, the SMMT said. The forecasts were produced for SMMT by AutoAnalysis, a consultancy. Prime Minister Theresa May has secured a delay to the Brexit deadline until Oct. 31, giving her more time to try to break an impasse in parliament over the terms of Britain's departure from the EU. Foreign minister Jeremy Hunt traveled to Japan earlier this month to try to persuade the Japanese government and Toyota, which has a big presence in Britain, that London was determined to avoid a no-deal Brexit. "Just a few years ago, industry was on track to produce 2 million cars by 2020 — a target now impossible with Britain's reputation as stable and attractive business environment undermined," SMMT chief executive Mike Hawes said. "All parties must find a compromise urgently so we can set about repairing the damage and diverting energy and investment to the technological challenges that will define the future of the global industry." (Reporting by William Schomberg, editing by David Milliken)

Amazon can now deliver packages to some Ford and Lincoln vehicles

Nothing succeeds without complications popping up along the way. Sure, Amazon's Prime delivery services have made shopping more convenient than brushing your teeth, but leaving millions of packages on doorsteps comes with an inherent danger: Thieves might swipe them without anybody knowing. Amazon's solution is called Amazon Key, which allows delivery men and women to enter a customer's house or car to drop off a package. This week, Ford and Lincoln announced they would be partnering with Amazon to integrate the service into some of their vehicles. Ford is following in the footsteps of Volvo and General Motors, as both companies announced their participation about a year ago. That includes Cadillac, Chevrolet, Buick, and GMC. Key will be made available for 2017-and-newer Fords equipped with FordPass Connect, and 2018-and-later Lincolns with Lincoln Connect. Key is not available everywhere, but it can be used in dozens of city throughout the U.S., and the network is expanding. To look for compatibility for your car and city, check on Amazon's dedicated Key website. Like every other tech invention these days, Key requires a smart device application, which requires a one-time setup. The service is available on the Key app or the FordPass and Lincoln Way apps. While ordering on Amazon, customers will then select in-car delivery during checkout. Input a public delivery address, and park the car within two blocks of that address. While the order is in transit, Amazon will provide status updates, another feature that takes away some of the anxiety of waiting for a package to be delivered. The package will be put into the car within a four-hour window, and users will get notifications that the exchange is complete, and the car is again securely locked. Should customers change their minds, they can always cancel the delivery method, and the car will remain locked. In that case, the delivery could go to the building where the car is parked, or be rescheduled. Ford imagines this as the beginning of numerous car-based services in the near future that can be scheduled while the owner is not there, such as car washes.

Fiat Chrysler picks Google, Samsung for global connected car system

DETROIT — Fiat Chrysler said on Tuesday it will use technology from Alphabet Inc's Google and Samsung to connect all its vehicles by 2022, providing music and video and facilitating future car-sharing and self-driving capabilities. Fiat Chrysler Automobiles NV (FCA) will use Google's Android operating system globally instead of a mixture of software that varies by region, a spokesman said. The automaker will also use a cloud-based digital platform from Samsung Electronics Co Ltd's Harman unit. Unlike its rivals General Motors and Ford, FCA has spent virtually nothing on developing self-driving vehicle technology. This saves the company large amounts of money, but makes it reliant on outside parties to provide technology and systems. FCA said it will launch the new capabilities in the second half of 2019. The company said the system will aid owners "by predicting maintenance needs, locating fuel and charging stations, receiving traffic prompts and restaurant offers and providing live customer-care assistance at the push of the button." Chrysler Dodge Fiat Jeep RAM Technology Emerging Technologies connected car

Lexus NX will be produced in Canada

OTTAWA/MONTREAL — Toyota Motor Corp will build its Lexus NX luxury crossover vehicle at a Canadian plant starting in 2022, the company said on Monday, a decision that Prime Minister Justin Trudeau said demonstrated the value of the country's international trade agreements. The plant will invest hundreds of millions of dollars to produce the Lexus NX and its hybrid version at the factory in Cambridge, Ontario, "supplying the entire North American market," Trudeau said in a presentation with Fred Volf, president of Toyota's Canadian unit. Citing Canada's trade agreements with Mexico, the United States, Europe and Asia, Trudeau said: "We have preferential trade access to two-thirds of the global economy. In fact, we're the only G7 country that has free trade deals with every other G7 country." Trudeau, who faces a tough re-election contest in October, said the plans by Toyota, one of the world's largest carmakers, will help guarantee 8,000 jobs and the factory. The announcement is a "counter narrative" for Canada's automaking industry following recent bad news from other automakers, said Flavio Volpe, president of the Toronto-based Automotive Parts Manufacturers' Association, especially in the province of Ontario. Fiat Chrysler Automobiles NV said in March it would cut a shift at its Windsor assembly plant, leading to 1,500 job losses, and General Motors said last year it would shut its Oshawa factory by the end of 2019. Plans to assemble the NX in Canada "means that Toyota's Canadian manufacturing operations are here to stay," Volf said, adding that the cars are "the most technologically advanced and the most in-demand cars in the Toyota-Lexus global lineup." On Sunday, Trudeau hosted Japanese Prime Minister Shinzo Abe in Ottawa. Both touted the benefits of a Pacific trade deal that U.S. President Donald Trump walked away from. Trudeau said he had discussed the project to build the Lexus NX in Canada with Chief Executive Akio Toyoda on April 1. "When we last chatted just a few weeks ago, we discussed the potential of this new Lexus mandate," Trudeau said.

Smart to discontinue sales in U.S., Canada

UPDATE: A Mercedes-Benz Spokesperson responded to Autoblog with the following statement: "After much careful consideration, smart will discontinue its battery-electric smart EQ fortwo model in the U.S. and Canadian markets at the conclusion of MY2019. A number of factors, including a declining micro-car market in the U.S. and Canada, combined with high homologation costs for a low volume model are central to this decision. "Mercedes-Benz will carry forward its electric strategy in the U.S. and Canada with the arrival of the new EQC in 2020. MBUSA and Mercedes-Benz Canada will continue to provide owners of gasoline powered and electric smart fortwo models with access to service and replacement parts via smart and authorized Mercedes-Benz dealers." The original post follows: Smart, the Daimler brand responsible for those little city cars you see all over the place in European cities, but rarely in American suburbs, has been on an interesting ride in recent years. A couple of years ago, the Smart went electric-only in the U.S. and Canada, where small car sales are waning and EV sales have yet to take off — though it continues to sell internal combustion versions in other markets. Most recently, we heard rumors of a possible demise of the brand before Daimler confirmed that Smart would live on through a joint venture with Geely, and that the next generation will be built in China. Now, as TechCrunch reports, Daimler plans to stop selling the smart brand in the U.S. and Canada after the 2019 model year. Autoblog has reached out to Daimler for confirmation, and will update this story when we hear back. According to TechCrunch, a spokesperson told the outlet, "After much careful consideration, smart will discontinue its battery-electric smart EQ Fortwo model in the U.S. and Canadian markets at the conclusion of MY2019. A number of factors, including a declining micro-car market in the U.S. and Canada, combined with high homologation costs for a low volume model, are central to this decision." The report states that Daimler will continue to support current Smart owners in the U.S. and Canada for both gas and electric markets through their Mercedes-Benz dealerships, which will provide service and parts. According to sales tracking site GoodCarBadCar, sales of the Smart Fortwo in the U.S. have dropped from 6,211 units in 2016 to 1,154 units in 2018. It reports just 231 sales in the first quarter of 2019.

Jaguar Land Rover planning to allow owners to earn cryptocurrency

Jaguar Land Rover, Britain's largest auto manufacturer, said on Monday it is testing software that will allow drivers of its cars to earn the IOTA cryptocurrency as a reward for sharing data. The company is developing what it calls "smart wallet" technology to be installed in its automobiles. This would reward Jaguar car drivers with IOTA coins for actions such as enabling their vehicles to automatically report useful data, such as traffic congestion or potholes to navigation providers or local authorities. Drivers could also earn rewards if the car participates in a ride-sharing program, Jaguar said. The tokens earned could be used to pay for tolls, parking and charging for electric cars. The overall goal was to "achieve zero emissions, zero accidents, and zero congestion," the company said. Global car companies are exploring blockchain applications, figuring out different ways in which they can leverage the technology to suit their different needs. Blockchain, the system powering cryptocurrencies like bitcoin, is a shared database that is maintained by a network of computers connected to the internet. The British car company is testing the technology at the new Jaguar Land Rover software engineering base in Shannon, Ireland, where engineers have already equipped several vehicles, including the Jaguar F-PACE and Range Rover Velar, with "smart wallet" features, the company said. It does not yet have a timetable for when it will be commercially available, said Jaguar, a subsidiary of Tata Motors. The IOTA token is based on a distributed ledger technology that enables people and machines to transfer money and data without any transaction fees. IOTA trades on digital asset exchanges and was last at 27 U.S. cents per token. "The smart wallet technology ... can be easily adapted into all new vehicles," Dominik Schiener, IOTA co-founder and co-chairman of its board, told Reuters on Friday. "IOTA wants to enable interoperability with all these different players. So there is no Jaguar coin, no BMW coin, but one universal token for this machine economy," he added.

Mitsubishi wants a compact pickup for the U.S. market, but won't rush it

A Mitsubishi dealer told Wards Auto last year that "the most requested model at the brand's U.S. dealer meetings is 'a pickup truck, a pickup truck, a pickup truck.'" This month, Mitsubishi North America's COO told Wards that the carmaker has its eye on getting back to the compact pickup segment in the U.S., but that it will take time. "[We'd] have to have one that's the right fit for Mitsubishi," he said, "for our demographic, and something that's really competitive in the market." That wasn't the case with the last compact pickup the brand sold here, the Raider. A product of the Daimler-Chrysler alliance with Mitsubishi at the time, the Raider was a rebadged Dodge Dakota. The pickup sputtered through four years of meager sales, being pulled from the market in 2009. As part of the Renault-Nissan alliance, Mitsubishi's been put in charge of the group's next midsize body-on-frame platform, Automotive News reports. The chassis will underpin the next-gen Mitsubishi Triton (2019 model pictured), Nissan Navara and Renault Alaskan, and if Daimler continues the tie-up with Renault, the next Mercedes X-Class. It sounds like Mitsubishi has already made room for electrification, the COO telling Wards, "you start mixing in some of that electrification technology and these hybrid drivetrains, the aspect of performance is really going to change in the future." The carmaker does very well with its compact Triton pickup, sold in 150 overseas markets under that name as well as L200 and Strada. Wards says LMC Automotive predicts a Triton will come to the U.S. as a 2025 model, but we can't know how similar our model would be to the international model. Our Nissan Frontier, for instance, is not the same as the Frontier sold overseas, the global truck also known as the Navara and NP300. The five-year wait shows Mitsubishi won't be reckless with any new launch now that it has a vision and momentum to protect. The Japanese carmaker has posted sales gains in the U.S. for six straight years. The last two years surpassed 100,000 units, 2018 delivering a 14 percent jump over 2017 in spite of Mitsubishi having just four models on sale here.

Muhammad Ali's 1976 Alfa Romeo Spider Veloce Series II is for sale

An Alfa Romeo was never in the plans. It was by accident that Muhammad Ali ended up bringing home this beautiful silver-on-black 1976 Spider Veloce Series II, but its interesting backstory only makes it more special. It's a story the car's next owner will surely need to memorize, as the car is currently listed on eBay for a Buy It Now price of $39,900 OBO. Found by Silodrome, the car is listed by Moto Exotica out of St. Louis, Missouri. According to Moto Exotica, which sources a clip from the book "Running with the Champ" by Ali's close friend and car guy Tim Shanahan, Ali had set out with Shanahan to buy a new Rolls-Royce (Ali loved his Double-Rs) during his time living in Chicago. The two visited European Imports in Lake Forest, Illinois, with the intention of buying a Kelly Green Corniche and possibly a Mercedes-Benz SL for Ali's wife, Veronica Porche. To Ali's dismay, the dealership did not have any SLs in stock, so this Alfa was suggested as an alternative. Ali purchased the car, brought it home, and ran into yet another issue. Porche did not know how to drive the car's manual transmission, and apparently didn't have any desire to learn. So the car mostly sat, with the exception of some rare errand runs by one of Ali's assistants. After a short time passed, Ali learned that Shanahan's personal car had broken down. In a situation that perhaps suggests destiny, Ali then gifted the car to Shanahan, who has owned the car for 40-plus years up until its sale to Moto Exotica. With about 80,000 miles, it has some wear and tear, such as a small crack on the dashboard, but it's in solid overall shape and recently received a respray. Plus it comes with the real registration with Ali's signature on it. Check out the full photos, video, and descriptive listing at Moto Exotica.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

Renault to propose joint holding company with Nissan, Nikkei reports

TOKYO — Renault SA will propose to Nissan Motor Co a plan to create a joint holding company that would give both firms equal footing as the French automaker seeks further integration with its Japanese partner, the Nikkei newspaper reported on Friday. Under the proposal, both firms would nominate a nearly equal number of directors to the new company in which ordinary shares in both Nissan and Renault would be transferred on a balanced basis, the newspaper said, without citing sources. This would effectively dilute the stake held by the French government in Renault to around 7-8 percent, from its current 15 percent, it added. The new company would be headquartered in a third country, such as Singapore. Renault plans to make the proposal to Nissan soon, the Nikkei said, having modified an earlier merger idea that Nissan rejected on April 12. Nissan declined to comment on the issue. The Financial Times newspaper reported that both Nissan and the Japanese government have refused to engage in merger talks with Renault. The report of the proposal comes as the outlook for the alliance — one of the world's top automaking partnerships — has clouded since the arrest in November of its main architect, Carlos Ghosn, for suspected financial misconduct. It also comes as Nissan's financial performance struggles following years of focusing on volume sales over building its brand, particularly in the United States, its biggest market. Nissan slashes its forecast This week, the Japanese automaker slashed its profit forecast for the year just ended to its lowest in nearly a decade, citing weakness in its U.S. operations. Renault for years has been vying for a closer merger with Nissan, which it rescued from the brink of bankruptcy two decades ago. Ghosn had been working to achieve a deeper integration before his arrest on financial misconduct charges in November last year. While the automakers have been consolidating many of their operations over the past decade, including procurement and production, many executives at Nissan have opposed an all-out merger with Renault. Instead, Nissan has argued for a more equal footing with Renault, which holds a 43 percent stake in its bigger partner. Nissan holds a 15 percent stake in Renault. It was unclear whether Renault would hold the casting vote in major decisions at the new company, as it did in Renault-Nissan B.V., a strategic management company jointly held by both companies that oversaw operations for the partnership.

GM faces possible class action lawsuit over 8-speed transmission

General Motors has been hit with a class-action lawsuit from owners who allege the eight-speed automatic transmission found in several rear-wheel-drive Chevrolet, Cadillac and GMC models between the 2015 and 2019 model years has a defect that causes the vehicles to hesitate and jerk when accelerating or slowing down. The lawsuit was posted to ClassAction.org and spotted by GM Authority. Problems with GM's Hydra-Matic 8L90 and 8L45 transmissions have been well-documented on Internet forums and via complaints filed with the National Highway Traffic Safety Administration, with many reporting damage to their vehicles. The lawsuit was first filed in December in U.S. District Court for the Southern District of Florida but appears to have been transferred recently to New York. Autoblog sought comment from Theodore Leopold, the lead attorney for the plaintiffs. "These transmissions have a common defect," the complaint reads. "Drivers attempting to accelerate or decelerate their cars feel a hesitation, followed by a significant shake, shudder, jerk, clunk, or 'hard shift' when the vehicle's automatic transmission changes gears." The problem also occurs when the vehicles accelerate in a single gear, without shifting, the plaintiffs allege. "Drivers have reported that the shift is sometimes so violent, they feel as though they have been hit by another vehicle." The problem is believed to center on the transmission, torque converter or both. The complaint says it causes undue friction, causing hydraulic systems and gears to function improperly and sometimes leaves metal shavings throughout the transmission, leading to costly repairs and replacement of parts or the entire transmission. It says GM has known about the problems since shortly after it introduced the transmissions, and has issued 13 technical service bulletins, none of which have resolved the problem. GM declined to comment on the lawsuit. The plaintiffs say GM should have warned consumers about the issues and covered repairs under each vehicle's three-year/36,000-mile bumper-to-bumper warranty. They're seeking statewide classes in at least six states: California, Florida, Illinois, New York, Oklahoma and Texas.

Mitsubishi Pajero Final Edition marks end of Japanese availability

Thirteen years ago, Mitsubishi discontinued the full-size Montero SUV in the U.S., and now the same thing is happening in its home country of Japan where it's called the Pajero. The company is marking the end of availability there with a Pajero Final Edition. Only 700 examples will be built. There isn't a whole lot that separates the Pajero Final Edition from normal ones. It has serial number badging inside, and special stickers on the outside commemorating the SUV's introduction in 1982. One cool feature is a Citizen watch with Final Edition branding that's only available to buyers of this Pajero. For a little extra, customers can opt for an exterior package that adds a rear spoiler, chrome spare tire cover and mud flaps with aluminum plates that spell out Pajero. It comes standard with either a black or tan leather interior, a sunroof, roof rails, cold-weather package, and under the hood a 3.2-liter diesel I4 coupled to a selectable four-wheel-drive system and five-speed automatic transmission. The price for it is 4,530,600 yen, or $40,602 at current exchange rates. Somewhat amazingly, this final Pajero isn't much different from the Montero that left our shores. The exterior has been lightly refreshed over the years with different lights and bumpers, and a more integrated spare tire cover. But it looks otherwise unchanged. The interior does sport more modern trimmings. The U.S. model also used a 3.8-liter gas-powered V6 rather than a diesel, but it did have a five-speed automatic like the current one. For diehard Montero and Pajero enthusiasts, this is a somewhat sad moment, but the good news is that Mitsubishi will continue to offer the SUV in other markets where fuel isn't as expensive and roads can still be seriously nasty.

Bronco Scout, Ford and Rivian, and next-gen Land Cruiser | Autoblog Podcast #578

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Road Test Editor Reese Counts and Assistant Editor Zac Palmer. First, they dicuss recent news, including the upcoming next-gen Toyota Land Cruiser, Ford's trademarking of "Scout" and "Bronco Scout," and Ford's $500 million investment in EV startup Rivian. After that, they talk about the cars they've been driving, including the Jeep Wrangler, Cadillac XT4 and Buick Regal GS. Last but not least, they help a listener choose a new car in our "Spend My Money" segment. Autoblog Podcast #578 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Toyota promises a next-generation Land Cruiser Ford trademarks "Scout" and "Bronco Scout" Ford invests $500 million in Rivian Cars we're driving: 2019 Jeep Wrangler 2019 Cadillac XT4 2019 Buick Regal GS Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video:

2019 Mini E Countryman Review | Not a great plug-in hybrid, but still great

At first glance, the 2019 Mini E Countryman plug-in hybrid is wildly unimpressive. It can only go a meager 12 miles on electricity alone, and when out of plugged-in electrons its turbocharged three-cylinder engine manages an EPA-estimated 27 mpg in combined driving. Pretty good for a compact SUV, but crap for a hybrid. Its price tag is eye-watering. Although it starts at $37,750, including $850 destination, my test Countryman hit the register at $45,750 and still didn't have power seats, leather, satellite radio, adaptive cruise control, and other items that should be included on a vehicle at this price range in this segment (compact SUVs like the Mercedes GLA or Volvo XC40). Admittedly, if you skip our test car's $2,000 John Cooper Works Appearance package (not a bad idea), you can add some of those extra niceties instead, but the price would still be steep. An E Countryman, or 2019 Mini Cooper S E Countryman ALL4 as it's officially and ridiculously known, is roughly about $4,000 more than a comparable gas-only Cooper S Countryman ALL4. There are some functional disadvantages as well. The plug-in hybrid lacks the regular Countryman's sliding back seat that adds cargo space without folding the seat backs and therefore wiping out passenger space (see video below). It also has only about 30 percent of the under-floor storage available in the cargo area, the result of the batteries needing to go somewhere. Now, Senior Editor Alex Kierstein reports that he found the E Countryman to still be perfectly space efficient. There was sufficient room for his wife to sit up front with a rear-facing baby seat behind her and a big stroller in the trunk. Still, he would've had even more room in the regular Countryman. The bottom suitcase in the right photo would not fit in the E Countryman since it lacks this regular version's removable floor panel. Really, all the above issues make the plug-in hybrid version of the Countryman a little hard to recommend ... at first. At second, third and fourth glances, it actually starts to make a lot more sense. Sure it only went between 10 and 12 miles on electricity after I recharged it, but hey, that's still 10 to 12 miles further than any other Mini can muster. You can even utilize the "Save Mode" that allows you save that electric range for times when you know it'll be most beneficial (say, the urban-driving conclusion to the morning commute).

Mil-Spec 006 Hummer H1 born into the darkness

Mil-Spec Automotive is up to build number six of its Hummer H1s, this one a customer commission for someone with the last name "Bane." This marks the halfway point in the Launch Edition series of 12 models that will run through to next year. Per customer request, the template started with Build 002, also a four-door slantback, but deviates in a few functional ways. That starts with the four-door slantback variant, but this one gets a much larger rear window. The Bold Body and Tire Package stretches horizontal footprint by eight inches, the bodywork by seven inches. Fender flares hulk over 20-inch gun-black rims wearing 38-inch Nitto Grappler tires. Build 006 shuns the executive interior package on Build 002, putting its cushiness on the outside with the Air-Ride Package. That installs eight-way adjustable shocks all around and automatic ride height adjustment. Sounds like the buyer could need it, since the newest unit also gets the 12K Package that ups GVWR to 12,000 pounds, with beefier axles, springs and braking. A 6.6-liter Duramax diesel sits beneath the $1,299 functional hood scoop, the oil-burner's output rated at 500 horsepower and 1,000 pound-feet of torque. And no road trip to Sonora or Medellin would be complete without a 12,000-pound Warn winch, lavish front brush guard and heavy duty rear step bumper, aluminum snorkel, 60-inch overhead light bar, and Paracord interior door handles. We'd think a locking front axle would be a given on this kind of rig, but apparently this H1 makes do with an ARB air locker on the rear. The brief for the design was "simple yet dramatic." Job done, we'd say, with Build 006 terrorizing the ground like black thunder. The price gets attention just as well: $295,039. This kind of drama doesn't come cheap. Featured Gallery Mil-Spec 006 Hummer H1 View 13 Photos News Source: Mil-Spec Automotive Hummer Truck Luxury Off-Road Vehicles Special and Limited Editions hummer h1

Everything new at the 2019 New York International Auto Show

Transcript: Welcome to the 2019 New York Auto Show. It's the last auto show, and so far it's my favorite of the year. We have a new buggy, compact pickup and trail ready SUV from Volkswagen. Ford brought the new Escape and a new Mustang performance variant, and we have a brand new Toyota Highlander and Subaru Outback. Let's go take a look around. We're here at the New York Auto Show with the Subaru stand. Normally the Subaru stand is just some white carpet and some show lighting. This year it's like we're in a national park. It's ... Frankly, I'm from Oregon. You're from Colorado. Yeah. It's making us feel at home. And in that way what better place and what better people to introduce this Subaru Outback which is pretty much the official car of Colorado and Oregon. Yeah. You actually have to buy a Subaru before they let you move to Colorado. Now instead of climbing up there and taking a look because we've been told we can't do that we're gonna go over there and check out another one. So the exterior, not that different. No. Looks exactly like an Outback. There's actually oddly a little more black plastic trim on the outside. A little too much for me. Right. It's interesting because it kind of slowly went away from that from the beginning because in the beginning the black plastic trim kind of made it an Outback, and now they're kind of bringing it back. I guess they needed to make it more macho. Right. Right. Now we're inside. Inside it looks pretty different. Swank. It's kind of swank for an Outback which has been pretty plain. Now this is the newly available vertically gigantic touch screen here. 11.6 inches. That is massive. This is how big it is when it's turned on ... just for the viewers. Now this is the onyx trim. So with that you get the black mirrors, the black wheels. This upholstery is special to the onyx, so it's gray and black and you also have this green stitching. Yeah, I like this accent stitching. It's kind of neat. Oh there's also a little tray there. Well this is a deep bin here. You can probably fit a phone. There we go. Almost. Yeah there are two USB ports. There's an additional two in the backseat. So this thing here you pop in the cup holder and it gives you a little more space or less space. These are really big, so if you have one of those Nalgene bottles I'm guessing it's going to fit in there. One of my complaints about my Subaru that I own now which is a naturally aspirated Crosstrek is that up in the mountains. It's slow?

Nissan slashes profit forecast as Ghosn arrest hurts brand appeal

TOKYO — Nissan cut its profit forecast for the fiscal year through March on Wednesday to reflect slowing sales, higher costs and the fallout from a criminal investigation of its former chairman, Carlos Ghosn. Nissan Motor Co. expects to post a 319 billion yen ($2.9 billion) profit for the fiscal year, marking a 22% drop from its earlier 410 billion yen ($3.7 billion) forecast. Nissan said the downgrade reflects higher costs in the U.S. from a warranty extension campaign for some vehicles and falling sales due to "corporate issues," alluding to the Ghosn scandal. Ghosn was arrested in November and is facing charges of underreporting his income and breach of trust. He says he is innocent. He was released on bail in March and is awaiting another court decision on bail after his re-arrest on April 4. Nissan, which is allied with Renault SA of France, has seen sales lag in France and Japan, where Ghosn is widely known. In the U.S. and China, buyers aren't as affected by the scandal, but the markets there overall have slowed. Other factors contributed to the revision, such as production not keeping up with demand for the Note, an extremely popular model in Japan. But the high-profile scandal has weakened the brand appeal of the maker of the Leaf electric car, Infiniti luxury model and X-trail sports utility vehicle. Nissan said it expects to sell 5.5 million vehicles in this fiscal year. Earlier it predicted it would sell 5.6 million. The company sold nearly 5.8 million vehicles in the fiscal year that ended in March 2018. The automaker reduced its sales outlook by 0.2% for the fiscal year through March 2019 to 11.5 trillion yen ($103 billion), compared to its previous forecast. It was Nissan's second downgrade for its outlook following one in February that cited faltering sales in China and the U.S. At that time, Nissan also logged costs about 9.2 billion yen ($83 million) related to the alleged underreporting of Ghosn's compensation. Nissan has promised to strengthen its corporate governance to prevent a recurrence of what it says is serious wrongdoing by Ghosn. Ghosn was sent by Nissan's French alliance partner, Renault SA, to help turn the Japanese automaker around when it was near bankruptcy 20 years ago. The future of the alliance is one of many questions clouding Nissan's future following Ghosn's ouster since he was the main liaison for the alliance, which includes smaller Japanese automaker Mitsubishi Motors.

US expands probe into ZF-TRW airbag failure-to-deploy to 12.3 million vehicles

DETROIT — U.S. auto safety regulators have expanded an investigation into malfunctioning airbag controls to include 12.3 million vehicles because the bags may not inflate in a crash. The problem could be responsible for as many as eight deaths. Vehicles made by Toyota, Honda, Kia, Hyundai, Mitsubishi and Fiat Chrysler from the 2010 through 2019 model years are included in the probe, which was revealed Tuesday in documents posted by the National Highway Traffic Safety Administration. It involves airbag control units made by ZF-TRW that were installed in the vehicles. The control units can fail in a crash, possibly because of unwanted electrical signals produced by the crash itself that can disable an air bag control circuit housed in the passenger compartment, according to NHTSA documents. The electrical signals can damage the control circuit, the documents say. ZF, a German auto parts maker which acquired TRW Automotive in 2015, said in a statement that it's committed to safety and is cooperating with NHTSA and automakers in the investigation. The case is another in a long list of problems with auto industry airbags, including faulty and potentially deadly Takata airbag inflators. At least 24 people have been killed worldwide and more than 200 injured by the inflators, which can explode with too much force and hurl dangerous shrapnel into the passenger cabin. The inflators touched off the largest series of automotive recalls in U.S. history involving with as many as 70 million inflators to be recalled by the end of next year. About 100 million inflators are to be recalled worldwide. On April 19, NHTSA upgraded the ZF-TRW probe from a preliminary evaluation to an engineering analysis, which is a step closer toward seeking recalls. So far, only Hyundai and Kia and Fiat Chrysler have issued recalls in the case. Four deaths that may have been caused by the problem were reported in Hyundai-Kia vehicles and three in Fiat Chrysler automobiles. NHTSA opened an investigation in March of 2017 involving the TRW parts in Hyundais and Kias. The upgrade came after investigators found two recent serious crashes involving 2018 and 2019 Toyota Corollas in which the airbags did not inflate. One person was killed. Jason Levine, executive director of the Center for Auto Safety, a nonprofit consumer group, said the ZF-TRW case shows the auto industry thus far has learned very little from Takata.

Waymo picks Detroit factory to build self-driving fleet by mid-2019

SAN FRANCISCO — Alphabet Inc's Waymo said on Tuesday it had chosen a factory in Detroit to mass produce self-driving cars, looking to the historical heart of the auto industry to build the vehicles of the future. The company's chief executive, John Krafcik, said in a blog post that Waymo would partner with American Axle & Manufacturing to lease and repurpose an existing Detroit facility that will be operational by mid-2019. The facility belongs to American Axle, next to the GM Hamtramck facility that is at risk of being shuttered, and is across the Detroit River from Windsor, where the Chrysler Pacificas that Waymo uses are built. Presumably Waymo will do the self-driving fitment of Pacificas at the new facility. Waymo said in January it had chosen Michigan for its first production facility, adding it would receive incentives from the public-private partnership agency, the Michigan Economic Development Corporation, and create up to 400 jobs over time exclusively related to self-driving. Krafcik said in his blog post Tuesday that it's the "perfect facility," with up to 200,000 square feet to expand into. He said Waymo will hire the region's auto manufacturing talent. Waymo plans to buy 62,000 Pacificas and 20,000 Jaguars and convert them for autonomous driving. By 2022, it intends to conduct about 1 million trips per day. In a sea of rivals, Waymo is generally thought of as far ahead in the self-driving race. It already operates a robotaxi service in Arizona that it plans to expand geographically over time. Global automakers, large technology companies and startups are all engaged in self-driving efforts, but experts expect it will be years before systems are ready to be rolled out in all areas, with software and regulations among the many challenges. Waymo is competing with rivals General Motors and Uber Technologies to deploy such vehicles for the masses. Tesla CEO Elon Musk has also announced the company plans to launch a robotaxi service in 2020. Waymo, which has been working on self-driving technology for a decade, provided few new details. American Axle, with which Waymo is partnering for its Detroit facility, was formed in 1994 when an investment team purchased five plants that General Motors had put up for sale. GM plans to end output at its last Detroit factory next year, after announcing in November a plan to halt production at five North American assembly plants and cut about 15,000 jobs.

Johan de Nysschen tells his side of the story

Automobile snagged time with ex-Cadillac, Infiniti, and Volkswagen of America boss Johan de Nysschen. General Motors decided to part ways with de Nysschen on April 18, 2018, after the German spent four years in charge of America's luxury brand. The longtime auto exec is a polarizing figure for enthusiasts, who seem to take a mostly negative view of his work at Infiniti and Cadillac. However, there's no denying de Nysschen is frank, and in the Automobile interview he puts an insider's perspective on a big bag of issues we can only speculate on. One of the biggest bombshells in the interview was that it wasn't de Nysschen's idea to move Cadillac to New York: "When I was recruited, I was informed that the company would relocate to New York," he said. Previous GM CEO Dan Ackerson had made the decision before hiring de Nysschen, then Ackerson let his new hire make the announcement. The big change came only two years after de Nysschen had taken over Infiniti after insisting Nissan's luxury brand move to Hong Kong. De Nysschen explained Cadillac's NYC move with the same rationale as Infiniti's Hong Kong move, so everyone assumed the new guy was doing his usual. He explains in the interview that after the move, "Folks who rooted for Detroit felt betrayed. Cadillac had an enemy." And that became a problem. He has nothing bad to say about GM or Cadillac, believing on the contrary that "GM is in a good position going forward." But he brought clarity to some of Cadillac's struggles. Among the issues was GM's "very vigorous" post-bankruptcy test for green-lighting a project. Another was the lack of specialization for the luxury arm. "Engines were generically developed with the Chevy brand in mind," he said, "and, then, 'Okay, well, yeah, it's good enough for Cadillac.'" That carried over into haphazard technology rollouts. "GM didn't have a specific technology roadmap aligned to particular brands," he said. "The process was, as they were developing new technologies, they would look at what product's launch date would be aligned with the maturation date and market readiness of a technology and go with it, whether Buick, Chevy, or what have you." De Nysschen worked to end such generalized approaches, which is how we get Cadillac taking the GM lead on technology and electrification.

Nissan reportedly rejecting Renault proposal for closer ties

TOKYO — Nissan Motor Co Ltd will reject a management integration proposal from French partner Renault SA and will call for an equal capital relationship, the Nikkei newspaper said on Monday, citing sources. Nissan's management feels the Japanese company has not been treated as an equal of Renault under existing capital ties, and a merger would make this inequality permanent, the Nikkei reported. The outlook for the alliance — one of the world's top automaking partnerships — has been in focus since the arrest in November of its main architect, Carlos Ghosn, on charges of financial misconduct. The former Nissan and Renault chairman has denied the charges against him and has said he was the victim of a boardroom coup by Nissan executives opposed to closer ties. To which, Bloomberg reported that it has seen emails in which Nissan executives were working with Japanese government officials to defend the company's independence, as Ghosn was pushing for a full merger. The emails indicate growing concern at high levels of the Japanese government, in the months before Ghosn's arrest, that his merger efforts would boost Renault and its largest shareholder, the French government, and harm Nissan, in a relationship the Japanese already saw as lopsided. The emails indicated a desire to keep the existing structure of the alliance with a "re-balancing of the shareholding" to reduce Renault's 43 percent stake in Nissan, and stated that Nissan's independence "should be respected." Nissan declined to comment directly on the emails, while reiterating that misconduct by Ghosn and his former aide, Greg Kelly, is "the sole cause of the chain of events." Renault saved Nissan from the brink of bankruptcy two decades ago and under their current capital alliance, the French company holds greater control over its much larger partner. Nissan Chief Executive Hiroto Saikawa declined to say whether the company had received a merger proposal from Renault. "Now is not the time to think of such things," he told a group of reporters outside of his house in Tokyo. "At the moment we are focused on improving Nissan's earnings performance. Please give us time to do that." Renault declined to comment on the report. Renault has argued in its proposal that an integration would maximize synergies within the French-Japanese alliance, according to the Nikkei. The Financial Times reported last month of Renault's intention to restart merger talks with Nissan within 12 months.

2019 Jaguar F-Pace SVR First Drive Review | Magnificent beast

ST. TROPEZ, France — Summarizing a new car in just two words is a wicked challenge, but here goes: Magnificent beast. That's the nickname Jaguar's engineering team gave the 2019 F-Pace SVR, and ... spoiler alert ... it's actually a damn fine descriptor for the 550-horsepower sport ute. The hot-rod SUV genre has been endlessly expanding, pioneered by the likes of the Porsche Cayenne. Recent contenders like the Alfa Romeo Stelvio Quadrifoglio and Mercedes-AMG GLC 63 keep the competition on its toes by busting Nurburgring Nordschleife lap records that shamed supercars from just a few years ago. The Jaguar F-Pace SVR arrives a tad late to the high-speed party. Previously available with as much as 380 horsepower from a supercharged V6, the new SVR plays ball packing a 5.0-liter V8 beneath its vented hood. The supercharged mill punches 550 hp and 502 lb-ft through an eight-speed ZF automatic. Power is routed to all four wheels, naturally, but the SVR is also the first F-Pace to get torque vectoring thanks to an electronically controlled rear differential. Also aiding the F-Pace through the corners are stiffer springs, reprogrammed adaptive Bilstein dampers, 12-inch forged aluminum wheels and a brake-based torque vectoring system. Additional go-fast goodies include lift-reducing aero, better engine ventilation, and larger four-piston front and two-piston rear ventilated brakes housed in larger 21-inch wheels. The F-Pace SVR's cabin offers more sporty austerity than before. Slimmer, supportive 10-way adjustable seats echo the SUV's more focused road manners, as do aggressive color schemes, contrast stitching, and a suede headliner. Small touches also signal the sharper edges, including an F-Type-derived shifter in place of the mediocre rotary gear selector. It doesn't inherit Jaguar's latest dual-screen infotainment system, updated steering wheel, or second-gen heads up display, as does the recently updated XE sedan. The F-Pace SVR shares a similar tune to the 575-hp F-Type SVR, but the SUV's V8 fires up with a milder bark. A new exhaust valve adjusts its butterfly valves gradually, avoiding the "light switch" transition from quiet to loud. And speaking of loud, while the blarty exhaust note isn't as in-your-face as some of Jaguar's more vocal models, U.S. versions might be slightly raspier since the European model I was driving was equipped with a gasoline particulate filter that has a slight muffling effect.

Lamborghini museum relaunches as MUDETEC, the Museum of Technology

Lamborghini has relaunched and rebranded its museum in Sant'Agata Bolognese, Italy. From hence forth, it will be known as the MUDETEC, aka the Museo Delle Technologie, aka the Museum of Technology. The new museum will blend the old with the new using interactive displays to both remember the breakthroughs of the past while exploring current and future directions. Lamborghini says it focuses on "safeguarding and conveying the values, driving passion, and future-focus that are the mark of Lamborghini." At opening, the museum will display the "Future Shapers since 1963" exhibition. It features a "virtual journey" through time with a different car representing each decade. For the '60s, Lamborghini chose to highlight the 350 GT, what the company calls its first sports car, the Miura, and the Espada. The Countach is the mark of the '70s, the LM002 represents the '80s, and the Diablo GT is featured for the '90s. For 2000 on, Lamborghini chose the Sesto Elemento. The Asterion, the Huracan Performante, the Aventador SVJ, the Huracan EVO, and the Urus help round out the exhibit with some of the company's newest innovations. In addition to serving as a walkable recording of the company, the new museum will host two student workshops. One, named "Vehicle Set-up and Ergonomics," will teach dynamics, aerodynamics, and structural vehicle development. The other, named "Carbon Fiber and Its Technology," will teach performance through the art of weight reduction, with a focus on Advanced Composite Lightweight Structures Development. Extra activities include a virtual driving simulator, a 360-degree immersive "brain room," and an Ad Personam area, where people can configure and customize cars they likely cannot buy. The exhibit is already open and will run until October 2019.

Buick Encore GX expected to come to the U.S. alongside the popular Encore

When we posted on Buick unveiling the Encore GX at Auto Shanghai 2019 as a longer-wheelbase version of the Encore, we though the GX trim could supplant our local Encore. According to Automotive News, citing "sources familiar with the plans," Buick will sell both the Encore and the Encore GX here. Brand boss Duncan Aldred told Buick dealers in January to expect a new model this year, and it appears the slightly larger subcompact crossover is that product. GM Authority reported the same news in March, the outlet saying that Buick intends to re-create in the U.S. the "model family" strategy the carmaker employs in China. Over there, our rebadged Verano sold as the first-generation Excelle, Excelle GT and Excelle GX, the GX being the wagon version of the sedan. When the Excelle trio moved a less expensive platform for the second generation, Buick introduced a Verano model in China in both sedan and Verano GS hatchback forms. AN reported that Buick is also planning a smaller three-row Enclave for China. The Encore GX differs fundamentally from both the Chinese- and U.S.-market Encores. Our Encore, a rebadged Opel/Vauxhall Mokka, rides on the Gamma II platform. The second-generation China-market Encore rides on GM's new Global Emerging Markets (GEM) platform, an updated version of the Gamma II for regions like China and Latin America. The Encore GX rides on the Vehicle Strategy Set - Front (VSS-F) architecture. AN wasn't sure yet where our U.S.-market Encore GX will be built, but doesn't expect it to come from China. The Encore GX here will slide into the lineup between the $23,200 Encore and $31,995 Envision. Whereas the Chinese model aims to stop hemorrhaging Encore sales in China, our version will want to expand the Encore success story. Since it went on sale in 2013, the model has posted double-digit sales increases here every year save for last year. In 2018 the model sold 93,073 units, accounting for 47 percent of brand sales. There's no reason to doubt the Encore GX will boost that number.