Convertible, Reconstructed Title, Former Accident Damage, Ready To Enjoy, Loaded on 2040-cars

Auto blog

2014 Chevy Cruze Diesel arrives with 42 mpg for $25,695*

The last time General Motors had a diesel passenger car in the US, it was the 1.8-liter 1986 Chevette. At the 2013 Chicago Auto Show today, GM is unveiling the much-anticipated 2014 Chevrolet Cruze Diesel. The compact bows with a 2.0-liter turbo-diesel four-cylinder engine that boasts 148 horsepower and 258 pound-feet of torque, with full twist coming on at just 2,000 rpm. What's more, the common-rail, direct-injection diesel features an overboost function that allows the engine to deliver up to 280 lb-ft of torque for 10 seconds at a time. Even with 10 more horsepower and 110 more pound-feet of torque than the available turbocharged 1.4-liter four-cylinder in the Cruze, the 2.0-liter diesel engine can return up to 42 mpg (highway) bolted to its six-speed automatic transmission.
If you're counting, that figure meets the less powerful Cruze Eco with a six-speed manual transmission. More importantly, the auto transmission Cruze Diesel matches its main competition, the Volkswagen Jetta TDI, in highway fuel economy. The Cruze 2.0 TD (as it will be badged) can also handle up to 20 percent biodiesel (B20), whereas the Jetta is rated only for B5. General Motors has not released city fuel economy for its newest diesel, but we do know how much it will cost you to jump behind the driver's seat.
GM will kindly ask for $25,695, plus an $810 destination fee. That marks a $2,115 premium over a loaded Cruze LTZ Auto and $2,640 more than the Jetta TDI, though the MSRP will net you a leather interior, 17-inch alloy wheels and an Aero Performance Package, as well as a two-year maintenance plan and five-year, 100,000-mile powertrain warranty. Compared to the gas-powered Cruze, you also lose a couple cubic feet of rear cargo space thanks to a 17-liter diesel emission fluid tank. That urea fluid, which helps put the clean in clean diesel, will need to be refilled at least every 10,000 miles.

Next Corvette ZR1 to get 700 horsepower?

Word has it General Motors may offer as much as 700 horsepower in the C7 Corvette ZR1. Motor Trend reports the next Corvette Z06 will continue to rely on its naturally aspirated 7.0-liter V8 engine for thrust, but the lump will deliver substantially more power. How much more? MT says the engine could deliver up to 600 ponies. That's a jump of 95 horsepower over the current Z06, though no figures have been finalized as of yet. Right now, GM is reportedly waiting to see what sort of grunt it can glean from the next ZR1.
The automaker has already made it clear it will resurrect the LT5 name for the new supercharged V8, and if GM is already pulling 600 from the Z06, the big dog ZR1 would theoretically offer 700 horsepower. Either way, the range-topping Corvette will be suitably insulated from its less potent siblings. Stay tuned. We aren't likely to see the Z06 for at least a year, with the ZR1 trailing along at some point there after.

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.