Find or Sell Used Cars, Trucks, and SUVs in USA

1949 F1 Ford Truck Rat Rod Chevy Small Block Similar To F100 Chevy 3100 C10 Hot on 2040-cars

Year:1949 Mileage:0
Location:

Batavia, New York, United States

Batavia, New York, United States

1

1

2

Description

So imagine seeing this old beat up 1949 ford f1 sitting there just begging to be put back on the road but it was too much of a Frankenstein to get anyone’s attention.  I looked at it and saw nothing but potential.  This is a great truck and it has been taken care of before it sat you can tell it has all the bells and whistles of the time and it was the top of the line model at the time.  This truck was a project of mine, pretty much I wasn’t going to let it get crushed or sit in another dreamers garage any longer it needed to be on the open road or bar hoping again.  So I dragged it onto the trailer literally and once I got it home I made it a driver again.  I would keep it but the city I live in you can only have 5 vehicles and I am way over beside I enjoy bringing old trucks and old triumph motorcycles back to life like others enjoy fishing or woodworking.  So I proved everyone wrong and put 100’s of hours worth of work into it and low and behold Frankenstein runs again and is ready to be driven.  The fact it has a chevy 283 in it just adds to the fact that this truck should be driven.  They are much cheaper and easier to maintain then the cast iron fords.

Ok here goes this truck came to me a couple months ago in very sad shape indeed.  It is indeed a 1949 ford body, frame and all suspension parts.  Then someone in the late sixties early seventies is my guess turned it into a hot rod by dropping in a 283 small block Chevy engine and auto tranny my guess is out of an impala cause the impala symbols are glued to the side of the truck.  They also ran ac power and an extra gas tank that is still in the bed of the truck.  The ac power and second gas tank are disconnected for safety reasons but could probably be hooked back up.  I left them in their cause the look is great and I can just tell that some guy owned this truck in the 70’s and loved it.  There were spark plugs in the old exhaust and the ac power just makes me think of an old movie with a guy revving his engine on the side of the road shooting flames and listening to a radio or something. However I guess it could have also been a work truck that did long trips due to the two gas tanks.  Either way it still has every option that was offered back then right down to the vacuum fan that is in the upper driver’s side corner of the windshield.  It even still works, and if you watch the video I show it working.

This truck has had a ton of work done to it. I am growing much attached to it so I am going to sell it now before I drive it around more and get even more attached.

Work I have done includes

New oil pump, bad relief valve on old one

New oil pump screen

New main seals on the engine, was leaking from sitting I am guessing

New points, cap, rotor, all that good stuff

New wheel cylinders, shoes, drums, springs, adjusters and so on in the back.  They were not even there

New exhaust manifold two down pipes and a couple cherry bombs

Brand new rubber on 20 inch dodge rims but center caps can be changed to say anything same bolt pattern

New 2 inch aluminum spacers on all four wheels so you can ride on modern tires and rims

All new studs and lugs on all four corners

Ok so you get the point almost every wear part on the truck has been replaced.

I am running an electric fuel pump so no need for choke fires right up every time.  I rewired all the important stuff to 12 volt so no more candle sticks for headlights and you now have brand new and working  brake lights, tail lights, turn signals, plate lights and thanks to new York and there inspection laws you also have new galvanized bumper that can be easily removed if you live in a more understanding state. This truck is unique it gets a ton of attention, I know the ford guy are going to give me grief for the FROD emblem I assure you I didn’t do it but it is very amusing. Frame of the truck has been modified and transmission crossbar as well but they did a great job with it. This truck is not a restoration project to put back to a Ford without a new frame.  However it has a 283 small block under the hood so if you want to dress it up all you have to do is get the old corvette head and such and you are on your way.  There is no key the ignition switch is hidden but right now it is not running a key at all.  Not sure what else to tell you.  It has relays for headlights passes inspection and it is a true rat rod but on a daily driver level.  This is not a speed demon I promise you that but it is also not original so I guess I would label it as a curser that sounds like a hot rod. Owe I also replace windshield and front seal. I have the rear seal but did not replace it yet cause of the rust above the window and if it was mine I would do something with that before I put the new seal on while the old window is out even if it was to just fill it with silicone. This truck also has an air vent on the hood that pops up by a lever under the dash i should have put that in the video it is really cool and it works. another very rare thing is this truck not only has heat but it still works as well

Ok so on to the bad I guess, it is a rat rod and it is old and sat for a long time so there will be no guaranty with this truck.  The started right up and oil pressure starts at 80 and as the truck warms up it drops right down to 60 psi however this engine sat a long time I would think it will need an addition plug change and wires soon but runs great right now.  The transmission shifts really well now that I replaced the vacuum line and filled her up with new tranny fluid, I would however flush it after about 100 miles or so because I am sure there will be particulate in it from sitting.  There is something dripping every once in a while but fluid levels don’t move enough to notice so didn’t look any further into it. I have personally only put about 20 miles on it since I finished it so I would not hop in and drive it cross country.  Once you buy it you can do what you like that’s just my personal opinion.

Both front cab corners have small holes which I covered with old plates but before covering them I checked out mounts they are in great shape so it would only need repaired it you wanted to go through the trouble. I put an L bracket in there on the driver’s side to reinforce the door on the hinge side so the door closes effortlessly now.  I am sure I am leaving out a lot of stuff and if you ask questions I will try and keep up with them. Owe and I also installed modern gauges so voltage, temperature, and oil pressure are easy to monitor they have lights for night driving and I did not mount them cause it will be personal preference as were to do so, speedo works but is a little off cause of the tire size, gas gauge does not since it was converted to 12 volt I didn’t even hook it up. It may work there is a switch in there for both main tank and the tank in the bed.

 

If you got questions ask or give me a call I am easiest to get a hold of me in the early afternoon I work evenings.  You can text anytime. (585) 415-6592


Shipping.  I will help as much as I can with shipping as far as if you send a third party shipper I will do what I can to help facilitate however I will not ship vehicles and prefer you come to get them

Please only pay deposit through PayPal.  If you need to pay for the vehicle with a credit card call and we will work that out or you can pay with PayPal and we can add in the fee they charge for using a credit card.

To be able to bid on my vehicles there are some requirements I apologize in advance but there are a lot of not so serious bidders out there and I still have to pay for the listing.  If you have 0 feedback call me or I will cancel your bid immediately.  Also if deposit is not paid for within 48 hours I will offer the vehicle to the next highest bidder.

Ok legal stuff.  These vehicles are legally sold as show vehicles only and if you decide to register and drive the vehicles on the road you do it at your own risk.


3


5


6


7


8


9


9


11


12


13


14


15


16


16


17


18


33yyhh

jkiklk

Happy bidding I guess and I know I probably will not get my money back out of this truck but it was a blast to build.  I did put a reserve on it cause if I don’t sell it I will sell one of my other rat trucks because this one is something special.

Auto Services in New York

Youngs` Service Station ★★★★★

Auto Repair & Service
Address: 13 Main St, Salisbury-Mills
Phone: (845) 744-2004

Whos Papi Tires ★★★★★

Auto Repair & Service, Tire Dealers, Wheels
Address: 6201 Broadway, Rochdale-Village
Phone: (718) 606-2480

Whitney Imports ★★★★★

Auto Repair & Service, Automobile Inspection Stations & Services
Address: 541 Whitney Rd W, Webster
Phone: (585) 586-7326

Wantagh Mitsubishi ★★★★★

New Car Dealers, Used Car Dealers
Address: 3460 Sunrise Hwy, Old-Bethpage
Phone: (516) 785-4300

Valley Automotive Service ★★★★★

Auto Repair & Service
Address: 234 Main St # A, Nelsonville
Phone: (845) 534-7435

Universal Imports Of Rochester ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Body Repairing & Painting
Address: 834 Linden Ave, Ontario-Center
Phone: (585) 381-8677

Auto blog

Ford, GM to collaborate on 9- and 10-speed transmissions

Mon, 15 Apr 2013

Back in October, there were reports that General Motors and Ford Motor Company were hard at work co-developing new nine- and ten-speed automatic transmissions, and now both automakers have confirmed this joint operation. While there are no specific vehicles mentioned to receive either transmission, a collaborative press release issued by GM and Ford mention that the transmission will be designed for front- and rear-wheel-drive cars, crossovers, trucks and SUVs.
These aren't the first powertrain components developed jointly between these cross-town rivals, either. The six-speed automatic currently used in vehicles like the Ford Edge, Ford Fusion, Chevrolet Cruze and Chevrolet Equinox was engineered in a similar fashion. As is the case with this existing transmission, both automakers will assist in the design, development and testing of the new transmissions, but each will build its own units in its own factories. Scroll down for the official press release.

Mulally will stay close to Ford after he steps down, plans to advise Fields [w/video]

Fri, 27 Jun 2014

Ford CEO Alan Mulally has less than a week left in his role of leading the Blue Oval before he hands off duties to Mark Fields on July 1. It doesn't look like Mulally is going to be shuffling off into his retirement anytime soon, though. The 68-year-old is being rather secretive about his next move, but he tells Bloomberg in a recent interview that he plans to stay close to Ford. Also, if Fields wants to ask for any advice, Mulally is happy to help.
Mulally took over at Ford in 2006 and led the company through a seriously rough patch in the auto industry. According to Bloomberg, he became famous or his Thursday meetings where executives were forced to deal with any problems before they could leave. Since announcing his retirement from Ford in May, Mulally has been insuring a smooth transition of power by traveling the world to all of company's major locations and saying goodbye to employees and dealers.
In terms of the future at Ford, Mulally doesn't predict any big changes in management style because the rest of the executive team is staying in place. He believes that Fields is going to maintain the processes already in place to keep things going. After all, it seems to be working. The company is predicting a return to profitability in Europe next year and is opening 88 new dealers in China. If the business could get its recalls under control, things could get even better.

Check out Ford's fully automated self-parking car [w/video]

Wed, 09 Oct 2013

As automakers continue to find uses for autonomous and semi-autonomous vehicle technology, Ford of Europe has announced that it is developing a self-parking system for future use. More advanced than the Active Park Assist already offered in many Ford products, the new Fully Assisted Parking Aid can take full control of the vehicle and can navigate angled and perpendicular parking spots.
While today's Active Park Assist can only parallel park with the driver controlling the gas, brake and gear selection, Fully Assisted Parking Aid can operate steering, gas, brake and gear selection all while making sure the car is properly parked in the intended space. As with APA, the driver pushes a button to make the car look for a proper spot (at speeds of up to 18 miles per hour), and when an adequate space is located, the operator pushes another button (either inside the car or outside via remote control) for the car to park itself - the button must be pressed throughout the whole parking maneuver. Even though Ford says that the car can effect gear selections on its own, the system must still start from Neutral, and the automaker isn't saying whether the car can put itself into Park when done or put itself in Drive when the operator is ready to go.
Ford is also taking the opportunity to announce its new Obstacle Avoidance technology. This automated system is able to detect objects - including pedestrians - in the road, warn drivers of said objects and, if needed, stop and steer automatically to avoid hitting the obstacle. Both systems are still in the prototype phase, so there is no word as to when we could see either on a production vehicle.