1999 Ford Expedition Xlt Sport Utility 4-door 5.4l on 2040-cars

Auto blog

Shelby GT350 Mustang limited to 137 units for 2015 model year

Interest in the 2015 Ford Shelby GT350 and GT350R Mustangs is already at a fever pitch, thanks performance goodies like a flat-plane-crank V8 and MagneRide dampers. Ford is ensuring demand stays stratospheric through at least the first half of the year, too, by keeping production of these muscular coupes very limited. In fact, just 137 of them in total are leaving the factory for the 2015 model year. As a way to commemorate the Shelby Mustang's 50th anniversary as a performance powerhouse, Ford is building just 37 examples of the 2015 GT350R. This is also a way to pay homage to Carroll Shelby. In 1965, the racing genius originally planned to build 35 GT350 production models, plus two prototypes. However, documents indicate only 34 of the ones meant for customers ever left the workshop. Now, he has gotten his wish. There are also 100 examples of the standard 2015 GT350 on the way. Of those, 50 get the Technology Package that includes things like MagneRide, a navigation system with Sync 3, and dual-zone climate control. The other 50 get the Track Package that has added cooling for the engine, transmission and differential, a strut tower brace, and the high-tech, magnetic dampers. Bear in mind, this limited output is only for the 2015 model year, not the calendar year. For the automotive world, 2016 should start in just a few months and allow for even more Shelby Mustangs to hit the streets. Related Video: FORD ANNOUNCES LIMITED RUN FOR 2015 SHELBY GT350; ONLY 37 GT350R MODELS TO BE BUILT Ford to produce limited run of 2015 Shelby® GT350 to commemorate the nameplate's 50th anniversary 2015 Shelby GT350 comes with a unique 2015 VIN – the envy of Shelby enthusiasts everywhere Limited run of 37 Shelby GT350R models to be built in homage to original GT350 competition model of 1965 In recognition of the 50th anniversary of the Shelby GT350, Ford will build a limited run of Shelby GT350 and GT350R Mustangs for 2015. The original Shelby GT350, introduced in 1965, established Mustang's performance credentials on racetracks around the world. The all-new Shelby GT350, featuring the most powerful naturally aspirated Ford production engine ever, re-establishes Mustang as a world-class sports car. Only 100 Shelby GT350 models will feature a 2015 model year designation before production switches over to 2016. Of these, 50 will be equipped with the Technology Package and 50 equipped with the Track Package.

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Recharge Wrap-up: Ford's "snowtonomous" Fusion Hybrid, Porsche eyes battery makers

Bosch and Panasonic are vying to be the battery supplier for Porsche's electric sports car based on the Mission E concept. While Bosch's costs may be higher, its solution would offer simpler logistics. Panasonic is already well established as a battery maker, providing the packs for the Porsche car's rival, Tesla. "We're in the final stage of making a decision," says Porsche CEO Oliver Blume, declining to comment on specific manufacturers. Neither Bosch nor Panasonic provided comment. Read more from Automotive News. Renault will supply a fleet of 150 Renault Zoe EVs for a smart solar charging project in Utrecht, Netherlands. The project involves the installation of 1,000 EV chargers powered by 10,000 photovoltaic panels. The Renault Zoes would be used as part of a carsharing program powered by the solar chargers. Renault and its partners will also implement a vehicle-to-grid system to provide energy during peak demand from the solar chargers and connected EVs. Read more in the press release from Renault. Ford has been testing an autonomous Fusion Hybrid prototype that is capable of driving itself in snowy conditions. Ford uses 3D mapping to scan the drive route. Its LiDAR laser mapping can even detect single falling snowflakes. It collects and processes up to 600 gigabytes of data per hour, comparing its environment to saved maps, a process that helps establish location more precisely than GPS. In addition to the LiDAR systems, the car is also equipped with cameras and radar to help it navigate. Eventually, the car could even be able to clean off its sensors when it detects loss of performance from ice and dirt. Read more in the press release below. FROM AUTONOMY TO SNOWTONOMY: HOW FORD FUSION HYBRID AUTONOMOUS RESEARCH VEHICLE CAN NAVIGATE IN WINTER DEARBORN, Mich., March 10, 2016 – Driving in snow can be a slippery challenge, with the potential for one blizzardy gust to white-out your field of view – a situation faced by the majority of people in the United States. So if self-driving cars are to become a reality – and they almost certainly will – they must be able to navigate snow-covered roads. In its quest to bring self-driving vehicles to millions of people around the world, Ford reveals six facts about its technology that allows for a car to drive itself in snow. 1. Mapping the way: Ford first creates high-resolution 3D maps using LiDAR technology to scan the area its autonomous vehicle will later drive in the snow.