2016 Ford Transit on 2040-cars

Auto blog

Ford and Chrysler reducing summer plant shutdowns

Most domestic automaker assembly plants traditionally take a couple of weeks off during the summer. The shutdowns give each plant time for much needed repairs and maintenance, and in some cases, help better align production with demand. Not this year, though, as demand for many models is outstripping what Ford, Chrysler and General Motors plants can produce.
Ford has announced that it will shorten its annual summer shutdown for most North American plants from two weeks to one. The shorter shutdown will increase the carmaker's annual North American production by 40,000 units on top of the 200,000 extra units that it was already planning to produce this year versus last. Automotive News reports that Ford produced 2.8 million vehicles on this continent in 2012, and that output this year has already increased 13 percent through April.
Chrysler, meanwhile, is also operating at full tilt and plans to run some plants through the summer with no shutdown at all. Those not getting a break include Jefferson North where the Jeep Grand Cherokee and Dodge Durango are assembled, Toledo North that will assemble the new Cherokee, and Conner Avenue, home of SRT Viper production. Other assembly plants will be down for a single week, while all of Chrysler's engine and transmission plants except one in Indiana will continue operating with no shutdown this summer.

Ford will put solid axles under the Bronco as the off-roading gods intended

We've been wondering what sort of creature the Bronco would be since we first heard of the thing last October, when a union chairman spilled the beans on the SUV and the Ranger pickup. Ford confirmed a 2020 arrival date for the Bronco at the 2017 Detroit Auto Show, but at that point pretty much all we were sure of was that the Ranger and Bronco would be returning. The open question would be how hungry Ford was to spoil the Jeep Wrangler's solo party as a compact(ish) off-roader with dual solid axles, since the easiest thing would be to carry over the suspension design of the presumably related international Ford Ranger and its Everest SUV version: independent front suspension with either a leaf- (Ranger) or coil-suspended (Everest) solid rear axle. Enter Dana, the long-time supplier of Jeep stick axles, to confirm that the 2020 Bronco is getting a pair of them. That means solid axles front and rear, just like under a Wrangler. So reports Automotive News, citing an investor presentation from Dana. All signs so far, such as the report that the Bronco would be engineered by the same team in Australia that created the Ranger pickup, indicated that the Bronco would share a platform with the Ranger and thus be body-on-frame. The solid axle confirmation essentially confirms that theory. Some off-road-capable vehicles have paired solid axles with unibody frames, like the Jeep Cherokee (XJ generation) and Grand Cherokee (ZJ and WJ generations), but they are outliers. Generally, if you've got solid axles at both ends, they're going in a vehicle with a ladder frame. It also lends credence to the notion that our Bronco won't simply be an imported Everest, which might be too understated to stand out from lesser crossovers anyways. This is good news if you have Blue Oval in your blood and pine for a modern SUV that'll show up the Jeep guys on the trail. Less directly, it could mean a wholesale assault on the formula that makes Jeeps successful in the first place: the massive aftermarket of off-roading equipment and dress-up bits that appeal to Jeep buyers almost as much as a Trail Rated badge. At a minimum, Bronco enthusiasts can breathe easy that the reborn SUV won't merely be a light-duty crossover with styling "inspired" by true off-roaders. There's still a lot left to learn about the Bronco. Keep up to date with our running summary of everything we know about the returning off-roader.

May 2016: FCA wins, Ford and GM stumble on weak car volumes

The May 2016 sales numbers are in, and it looks as though FCA is getting some vindication for boldly cancelling two slow-selling car models. Meanwhile, Ford saw overall sales dip and GM's May volume took a big dive versus the same month in 2015. While Marchionne's decision to axe the Chrysler 200 and Dodge Dart has drawn criticism as being short-sighted, it's working for FCA so far. Although the Dart and 200 aren't out of production yet and no capacity has been shifted to crossover or trucks, May's numbers show that the emphasis on Jeep and Ram models makes sense right now. FCA's US sales rose 1 percent last month compared to May 2015, putting the year-to-date total at 955,186 vehicles, an increase of 6 percent compared to the same period last year. Standouts included the Jeep Renegade, Compass, and Patriot, and the Fiat 500X. Ram pickup sales were down 3 percent. And your fun fact is that Alfa Romeo sales were up precisely 10 percent, for a total of 44 4Cs sold versus 40 in the same month last year. At FoMoCo, the Ford brand took a hit to the tune of 6.4 percent from May 2015 to 2016, registering 226,190 sales last month. Lincoln showed improvement on its modest numbers, going from 9,174 to 9,807, a 6.9 percent increase. Overall, Ford was down 5.9 percent for the month to 235,997; despite the slump, year-to-date total Ford sales are up 4.2 percent to 1,112,939. Strong sellers included Escape, Expedition, F-Series, and Transit - big stuff. Most small and/or efficient models (Fiesta, Focus, Fusion, C-Max) saw sales slides. Fusion sales were also down, likely due to effects of model changeover to the freshened 2017 model. Ford has promised four new crossovers and SUVs by 2020 and if things keep trending this way the company will be able to sell them, but things could change in the next four years. GM saw the worst of it for domestic brands. Retail and fleet sales were down for each of the four divisions, with the May 2016 total dropping 18 percent to 240,450 vehicles. GM's year-to-date sales are down 5.0 percent in 2016 to 1,183,705. Both the Sierra and Silverado were down significantly, and the majority of Chevy, Buick, GMC, and Cadillac nameplates saw sales decreases, with both small cars and larger utilities included. Not even big stuff could help GM this month, it seems. We'll have more on the rest of the industry's May sales as those figures trickle in.