Chrysler Saratoga, page #8

Auto blog

PSA reportedly ditching its two tiny gasoline city cars ahead of merger

The Peugeot 108.   PARIS — PSA is ending the production of Peugeot and Citroen small city cars, three sources told Reuters, withdrawing from an increasingly unprofitable market as its starts a strategic review ahead of its planned merger with Fiat Chrysler. While PSA had already agreed to sell its stake in its Czech joint venture with Toyota where the Peugeot 108 and Citroen C1 models are made, the decision to stop selling the gasoline cars altogether has just been taken, the sources said. Carmakers are reviewing the production of vehicles with combustion engines as they need to fit costly exhaust filtering systems to meet tighter emissions laws. That's pushing up the cost of some so-called entry-level A segment cars to the point where they are hard to justify economically. "PSA is getting out of both the factory and the A segment business, as it is offered today, and on which manufacturers have arguably lost the most money in Europe," one of the sources familiar with the matter said. PSA declined to comment on the future of the two small cars. It said it was reviewing which products would best meet customer expectations in the A segment and cope with European carbon emissions targets. "This means a reflection with fresh and disruptive ideas," a spokesman for the French carmaker said. The European Commission is planning to tighten its emissions limits for cars under new proposals designed to cut the bloc's greenhouse gas output further by 2030. PSA's merger project with FCA has also increased the options available, two of the sources said, as the Italian-U.S. company has no intention of abandoning its small best-selling Panda and 500 models. Both already have hybrid versions and the 500 is also available in full electric mode. "Current projects could be replaced by new ones made possible by the merger with FCA", another source said. "The merger is turning all the cards around, especially when you consider that the A segment, from the very first 500 to the Panda, is inseparable from Fiat history". FCA declined to comment. PSA and FCA aim to finalize their merger in the first quarter next year to create a new company called Stellantis, which will be the fourth-biggest automaker in the world. Market contraction The European market for frugal city cars has been shrinking for several years.

To grease the skids for Stellantis, PSA offers to boost Toyota's fortunes

BRUSSELS/MILAN — Peugeot maker PSA has offered to boost Japanese rival Toyota to try to address EU antitrust concerns about its plan to create the world's fourth-biggest carmaker, to be called Stellantis, by merging with Fiat Chrysler, people familiar with the matter said on Friday. PSA has offered to increase the production capacity for Toyota in their van joint venture, one of the sources said. Another source said the French company would sell the vans at close to cost. PSA makes vans for Toyota in its Sevelnord plant in northern France. The van collaboration started in 2012. PSA submitted its offer to the European Commission earlier on Friday, three months after the EU enforcer opened a full-scale investigation into the deal with FCA on concerns that it would hurt competition in small vans in 14 EU countries and Britain. "As of now, the transaction has obtained merger clearance in 14 jurisdictions. As previously stated, closing of the transaction is expected to occur in the first quarter of 2021," PSA and FCA said in a joint statement. The Commission, which temporarily halted its investigation into the deal in July while waiting for the companies to provide requested data, did not set a deadline for its decision. "The deadline is still suspended. This procedure in merger investigations is activated if the parties fail to provide, in a timely fashion, an important piece of information that the Commission has requested from them," the EU executive said. It is now expected to seek feedback from customers and rivals before deciding whether to demand more concessions, or either clear or block the deal. Government/Legal Chrysler Fiat Peugeot Stellantis

Junkyard Gem: 1987 Chrysler LeBaron Coupe

For the 1989 through 1991 model years, Chrysler and Maserati teamed up to create one of the most fascinating machines of the era: the Chrysler TC by Maserati. Built in Milan, the chassis and general body lines of the TC derived from the smooth-looking 1987 Chrysler LeBaron Coupe (just as its Turin/Hamtramck-made Cadillac Allante competitor traced its ancestry to the Eldorado). After writing about a few discarded TCs, I decided that I'd keep my junkyard eye open for an example of its LeBaron Coupe sibling. Here's an '87, customized in proper mid-2000s-style Fast & Furious Mode, found in a self-service yard in northeastern Colorado. The LeBaron name came from a 1930s coachbuilder, ultimately bought by Chrysler, and spent many decades being applied to super-luxe Imperial models. In the late 1970s and early 1980s, Chrysler glued LeBaron badges and lots of bling on the Dodge Diplomat; the famous Iacocca-era K-Car LeBarons followed in the 1982 model year. The original K-based LeBaron Coupe seemed boxy and stodgy, so a slicker design went on a modified K chassis for the 1987 through 1995 model years. This car got some serious interior modifications at some point, including aftermarket seats, purple-and-white paint on the dash, and fiberglass door panels. The original door controls now live in diamond-plate panels. The gauge faces have faded in the harsh Colorado sun, but they appear to be custom-made. The engine is long gone from the yellow-wire-loom-decorated compartment, but the emissions sticker on the hood underside indicates that it was the 2.2-liter turbocharged four, rated at 146 horsepower. That was a big number for a 2,731-pound car in 1987. More LeBarons than you might have expected came with manual transmissions around this time, but this one has the three-speed automatic. The big-bore tailpipe got stuffed with dirt at some point during this car's journey here. The hood scoop must have been so good that a junkyard shopper grabbed it. I hope it stood at least a foot tall. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. James Earl Jones did the narration on these heart-pounding advertisements. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Even though the earlier LeBarons were very different cars, we need to get Ricardo Montalban in here. Here's Ricardo after being seduced by the '84 LeBaron convertible.

EIB ups financing for Fiat Chrysler's electric vehicles to $949 million

MILAN — The European Investment Bank (EIB) has increased to almost 800 million euros ($949 million) its funding to Fiat Chrysler Automobiles (FCA) to support production of electric and hybrid vehicles, they said in a joint statement. Investments to manufacture battery electric vehicles and plug-in hybrid electric vehicles will be mainly directed at FCA plants located in southern Italy, supporting employment and compliance with the strictest environmental criteria. To improve capacity utilization at FCA's Italian plants, the group has announced a 5 billion euro investment plan for the country through 2021 which envisages the launch of new electric and hybrid models. EIB and FCA had sealed 300 million euros in financing before the summer to fund investments for plug-in hybrid electric vehicle production lines at plants in Melfi, in the southern Basilicata region, and battery electric vehicles at Fiat's historic Turin plant of Mirafiori over the 2019-2021 period. FCA has now finalized a 485 million euro deal with EIB to support both an innovative line of plug-in hybrid electric vehicles at the Pomigliano plant in the southern Campania region as well as R&D activities at FCA laboratories in Turin. The EIB credit line covers 75% of the total value of FCA's investment in the project for the 2020-2023 period. Earnings/Financials Green Plants/Manufacturing Chrysler Fiat

Fiat Chrysler shares get a boost after revised Stellantis merger deal with PSA

MILAN — Shares in Fiat Chrysler (FCA) rose sharply in Milan on Tuesday after the car maker and French partner PSA revised the terms of their merger deal, with FCA's shareholders getting a smaller cash payout but a stake in another business. FCA and PSA, which last year agreed to merge to give birth to Stellantis, the world's fourth largest car manufacturer, said late on Monday they had amended the accord to conserve cash and better face the COVID-19 challenge to the auto sector. Milan-listed shares in Fiat Chrysler rose almost 8% by 1000 GMT, while PSA gained 1.5%. Under the revised terms, FCA will cut from 5.5 billion euros ($6.5 billion) to 2.9 billion euros the cash portion of a special dividend its shareholders are set to receive on conclusion of the merger. However, PSA will for its part delay the planned spinoff of its 46% stake in car parts maker Faurecia until after the deal is finalized. That means all Stellantis shareholders — and not just the current PSA investors - will get shares in a company which has a market value of 5.8 billion euros. Based on Stellantis' 50-50 ownership structure, FCA and PSA respective shareholders will each receive a 23% stake in Faurecia. Analysts welcomed the 2.6 billion euros in additional liquidity for Stellantis' balance sheet as well as the increase in projected synergies to more than 5 billion euros from 3.7 billion. There was also further reassurance as the two companies confirmed they expected the deal to close by the end of the first quarter of 2021. "All told, the two players emerge as winners," broker ODDO BHF said in a note. "Of the two, FCA might be a bit more of a winner in the short term given the structure of the deal and the numerous payouts to shareholders to come in the quarters ahead (potentially close to 5 billion euros versus the current capitalization of around 16 billion euros)." The special dividend for FCA shareholders had proved contentious after Italy offered state guarantees for a 6.3 billion euro loan to the company's Italian business. "These announcements should, at last, end the debate over the financial terms of the merger, which had become a big topic and was still penalizing the two groups' share performances," ODDO BHF said. PSA and FCA said they would consider paying out 500 million euros to shareholders in each firm before closing or else a 1 billion euro payout to Stellantis shareholders afterwards, depending on market conditions and company performance and outlook.

Chrysler prices updated 2021 Voyager and Pacifica line

Chrysler is updating the Voyager and the Pacifica with a fresh design, available all-wheel drive, plus a handful of improvements inside and out for the 2021 model year. Unsurprising, the changes come with a higher price. Priced at $28,730 including a mandatory $1,495 destination charge, the Voyager L remains the company's entry-level model, and it's $250 more expensive than the 2020 model. Next up is the LX, which starts at $31,540. It's followed by the fleet-only LXi model; if you operate a fleet, or if you're just curious, it's priced at $34,740. Moving up, the Pacifica is a nicer alternative to the Voyager with additional features, a more upscale look, and a correspondingly higher price. It's also offered with all-wheel drive and with a gasoline-electric hybrid powertrain, though the two options are not compatible. The entry point into the range is the Touring priced at $36,540 including the aforementioned destination charge, which is a $1,000 increase compared to the 2020 model.   Related: Least expensive vehicles to insure in America   New for 2021, all-wheel drive is a long-awaited $2,995 option that brings the Touring's price up to $39,535, while selecting the hybrid model bumps that figure to $41,490. Interestingly, the Touring and Touring L models are the only front-wheel drive, non-electrified variants of the Pacifica. Called Limited and Pinnacle, respectively, the next two are only available with one or the other, and they're priced accordingly. The top-of-the-line all-wheel drive Pinnacle is priced in luxury car territory at $54,885, while the hybrid starts at $52,340.  It's worth mentioning the positioning of the all-wheel drive and hybrid models is reversed as buyers move up in the trim hierarchy. Shop for a Touring L, and you'll pay $1,155 more for a hybrid van than for one equipped with all-wheel drive. Step up to the Pinnacle model, and all-wheel drive costs $2,545 more than the hybrid system. 2021 marks the end of the 35th Anniversary and Red S models. Don't expect a 36th, 37th, or 38th Anniversary model to appear, but a sportier-looking version along the lines of the Red S could reappear. Built in Canada, the 2021 Chrysler Voyager and 2021 Chrysler Pacifica will begin arriving in American showrooms in the fourth quarter of 2020. Although the minivan segment isn't nearly as important as it once was, it's still relatively big and several of its main players are receiving comprehensive updates for 2021.

Jeep Wrangler 4xe's hybrid powertrain: Could it be headed to other FCA products?

On its own, the 2021 Jeep Wrangler 4xe plug-in hybrid is a big deal for the brand and the model line. It's the most powerful and most efficient Wrangler by significant margins, and it doesn't give up the off-road capability that makes the Wrangler so special. But another great thing about this hybrid powertrain is its potential to be transplanted into other FCA vehicles. Just to recap, the layout of the Wrangler's hybrid powertrain, front to back, is as follows: engine, clutch, electric motor, clutch, transmission. The engine is the same 2.0-liter turbocharged four-cylinder that's a standalone engine for the Wrangler. The transmission and electric motor are sort of one unit, with the motor and clutch replacing the torque converter of the transmission. And the transmission itself is the ubiquitous eight-speed ZF automatic gearbox. Its transmission code name is 8HP75PH. The ZF eight-speed is available in every FCA product with a longitudinally-mounted engine and rear-wheel drive or four-wheel drive, with variations in the amount of power and torque it can handle. Not only that, but the Ram 1500 and 2500 and the Jeep Wrangler and Gladiator all have powertrains that utilize the non-hybrid version of the 8HP75 transmission specifically. Even the gear ratios for that transmission as well as the 8HP70 used in the Jeep Grand Cherokee, Dodge Durango, Dodge Charger and Chrysler 300 are nearly identical to those in the 8HP75PH. And a Fiat-Chrysler representative confirmed that the transmission portion of the hybrid drivetrain is basically carry-over from the regular 8HP75. So a transplant could be a relatively simple process. As for which of these models would be the most likely to receive the hybrid powertrain first, the Jeep Gladiator and Ram 1500 would seem like good bets, since they likely have the most similar transmissions, and the Gladiator in particular because of its closely-related underpinnings to the Wrangler. Both are also highly profitable trucks that sell well and could justify the development costs of adapting another powertrain. And in the case of the Ram, there's the impending F-150 hybrid to think about. Although Ram isn't going after a fully electric model, a PHEV could be a nice middle ground. A potential limiting factor would be whether the hybrid powertrain would be sufficiently robust to handle heavy payload and towing demands, particularly over longer periods.

Henrik Fisker interview, and driving the Polestar 2 | Autoblog Podcast #643

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor, Green, John Beltz Snyder. They've been driving the updated 2021 Honda Odyssey, the 2020 Mercedes-AMG GLC 43 and the new Polestar 2 electric sedan. After reviewing those, they talk about how the Chrysler 300 appears to be withering on the vine. Next, they take time to talk to legendary automotive designer and eponymous Chairman & CEO of Fisker Inc., Mr. Henrik Fisker himself, about jeans, horses and, of course, electric cars. Finally, they help a listener pick a $100,000 supercar in the "Spend My Money" segment. Autoblog Podcast #643 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Cars we're driving 2021 Honda Odyssey 2020 Mercedes-AMG GLC 43 2020 Polestar 2 Chrysler 300 soldiers on for 2021 with pared-down range, higher price Henrik Fisker interview Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video:

Chrysler 300 soldiers on for 2021 with pared-down range, higher price

Chrysler's last remaining sedan, the 300, will enter the 2021 model year with fewer trim levels and a higher price, according to a recent report. The 2021 model will be the second-generation 300's 10th year on the American market. Well-informed website CarsDirect received a dealer ordering guide, which reportedly confirms the Limited and 300C trims levels will not return for 2021. They're the two most expensive trims offered for 2020, and the publication added that removing them will likely mean upscale features like wood interior trim, Nappa leather upholstery, and quilted seats will no longer be available. It concluded the 2021 300 lineup will consist solely of the Touring and the 300S models, though it oddly made no mention of the Touring L. It doesn't sound like Chrysler will make any major visual or mechanical changes to the 300 — sorry, Hellcat fans. Available with rear- or all-wheel drive, the entry-level Touring model will be powered by the company's venerable 3.6-liter V6 tuned to make 292 horsepower and 260 pound-feet of torque. Marketed as a sportier sedan, the rear-wheel drive-only 300S will come standard with a 300-horse version of the V6, but buyers who want more power will be able to order a 5.7-liter Hemi V8 rated at 363 horsepower and 394 pound-feet of torque at extra cost. Pricing for the 2021 300 Touring will start at $31,940 including a $1,495 destination charge, a $405 increase over the 2020 model. Stepping up to the 300S will require spending $38,980, but the cost of the optional V8 will increase from $3,000 to $4,000, bringing its price to $42,890 once the aforementioned destination charge enters the equation. Keep in mind none of these figures are official, and Chrysler hasn't commented on the report. Most of the carmakers operating under the Fiat-Chrysler Automobiles (FCA) umbrella will announce the changes they're making for 2021 on September 1 — that's next Tuesday, so we won't have to wait long to find out what's in store for the 300. Chrysler has kept its lips sealed about what's next. Rumors claiming the sedan wouldn't live to see 2020 were evidently false, yet it can't remain in production for another decade. Sales fell by 37% to 29,213 units in 2019. Chrysler can either develop a third-generation model that will likely need to represent it in the sedan segment through the 2020s, or it can hike the path blazed by many of its rivals and throw in the towel.

Junkyard Gem: 1978 Chrysler LeBaron Coupe

From the early 1930s through the middle 1970s, Chrysler used the LeBaron name (taken from a coachbuilder eventually consumed by the car company, much as Fleetwood and Ghia were absorbed by GM and Ford, respectively) on high-end Imperial models. Then, facing decreased demand for mammoth land yachts thanks to certain geopolitical events, Chrysler created a separate LeBaron model, based on the midsize platform used for the Dodge Diplomat/Plymouth Gran Fury. Production of this LeBaron began in 1977 and continued until the debut of Lee Iacocca's famous K-Car LeBarons for the 1982 model year. While you'll find the occasional Diplomat these days, the 1977-1981 LeBaron has become all but extinct. Here's a crash-victim '78 in a Denver car graveyard. Plenty of times, I'll find discarded cars of this era that seem to have moldered outside for decade after neglected decade, but this one drove to its final crash. That means that the 318-cubic-inch (5.2-liter) V8 under the hood would be a good bet to buy for another Chrysler project… but nobody seems interested, because this Malaise Era engine made only 140 horsepower when new. The base engine in the 1978 LeBaron was a 110-horse Slant-6, so at least this car had the upgrade. Sure, the Diplomat was the not-so-plush successor to the non-plush Aspen/Volare and the even-less-plush Dart/Valiant, but Chrysler installed a reasonably nice interior in the Diplomat's Chrysler-badged sibling. This one has the standard "Cortez" cloth-and-vinyl bench seat, but not the optional power windows or door locks. This one has stickers for Run-D.M.C., Public Enemy, Slayer, and MegadethÂ… plus one for the Oakland Raiders, hated rivals of Denver's local sportsball team. I'm pretty sure the car was not being driven by the original purchaser when it crashed. Believe it or not, this car was available with a four-on-the-floor manual transmission and a V8 engine. Were any sold that way? I wouldn't bet on it. Molded-in faux stitching proved very popular in American cars of the late 1970s and early 1980s. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This advertisement may have resulted in some cannibalization of Cordoba sales, though the Pontiac Grand Prix stood as the primary rival for the '78 LeBaron coupe. Featured Gallery Junked 1978 Chrysler LeBaron Coupe View 39 Photos Auto News Chrysler Automotive History Coupe Chrysler LeBaron Junkyard Gems