Chrysler Saratoga, page #12

Auto blog

All eyes on Detroit as automakers prepare for slow, careful reopening of plants

DETROIT — The U.S. factories that make Fords, Chevys and Jeeps are coming back to life this week as workers install new safety equipment and wake up machines ahead of the high-stakes restart the Detroit automakers plan to launch on Monday. Ford, General Motors and Fiat Chrysler Automobiles all plan to reopen North American factories on May 18. The reopening of the U.S. auto sector will be a closely watched test of whether workers across a range of industries can return to factories in large numbers without a resurgence of COVID-19 infections. How well the automakers do will be significant for the U.S. economy, as nearly 1 million workers are employed in the sector. Executives at Ford and GM said separately this week the companies have not recorded any cases of COVID-19 transmission in plants outside the United States since adopting new safety protocols. Those procedures include mandatory face masks, separation of workers on assembly lines, frequent cleaning of work areas and requirements that workers pass through temperature monitors and report any symptoms before entering a plant. The Detroit Three have taken unprecedented steps to share information about coronavirus safety practices and develop a common set of workplace standards for their restarts, working with the United Auto Workers union, executives said. "We thought it was critical that we did it together," Ford manufacturing and labor chief Gary Johnson told Reuters. "We've never done this as an industry." The Detroit automakers will restart U.S. plants without regular testing of workers, because they do not have access to sufficient testing capacity, executives and UAW officials said. They will test workers who report COVID-19 symptoms or have fevers discovered by temperature scanners installed at factory entrances. "We have to continue to push for this testing," United Auto Workers union Vice President Cindy Estrada told Reuters on Wednesday. "Unless we have testing weekly to keep sick people out of the plant there is always a risk." Adopting new safety practices is just part of the work the companies must do to reopen after an extraordinary shutdown that has lasted two months.   Wave zero At Ford, workers going in to ready factories are part of what Chief Operating Officer Jim Farley calls "wave zero." The work of wave zero employees "is really important for success of the startup," he said in an interview.

Michigan Gov. Gretchen Whitmer says manufacturing can reopen May 11

Michigan Governor Gretchen Whitmer on Thursday said the state's factories can reopen next Monday, May 11, removing one of the last major obstacles to North American automakers bringing thousands of laid-off employees back to work amid the coronavirus pandemic. While reopening the manufacturing sector, Whitmer also extended her state's stay-at-home order by about two weeks to May 28, citing a desire to avoid a second wave of COVID-19, the respiratory illness caused by the novel coronavirus. “WeÂ’re not out of the woods yet, but this is an important step forward," Whitmer said in a statement. "As we continue to phase in sectors of our economy, I will keep working around the clock to ensure our businesses adopt best practices to protect workers." This week, General Motors and Fiat Chrysler Automobiles said they were targeting resuming vehicle production in North America on May 18, but suppliers would need time to prepare ahead for that date. Ford has not said what date it is targeting. The governor previously extended the state's coronavirus stay-at-home order through May 15, but had lifted restrictions for some businesses. Neighboring Ohio had allowed manufacturing to resume this past Monday, putting pressure on Whitmer to follow suit. Michigan's shutdown had stymied efforts by the Detroit Three and rival automakers to restart vehicle assembly anywhere in the United States, because so many critical parts suppliers are based in the state. Automakers and their suppliers already have begun gearing up for a possible resumption of work at their U.S. plants, but needed the official go-ahead from Whitmer. Industry officials had been pressing Whitmer to allow suppliers to reopen starting May 11 so the automakers could resume operations on their target date. They also wanted the green light so they can press Mexico to open its auto sector as suppliers there are also critical for the industry restart. The automakers' plans were tacitly approved on Tuesday by the United Auto Workers union, which represents the Detroit automakers' hourly U.S. plant workers. The union had previously said early May was "too soon and too risky" to restart manufacturing. Under Whitmer's new order, factories must adopt measures to protect workers, including daily entry screening, no-touch temperature screening as soon as possible and use of protective gear like face masks. Automakers have already rolled out such policies.

Fiat Chrysler's dealers and mechanics to reopen on Monday in Italy

MILAN — Fiat Chrysler said on Thursday its Italian network of approved dealers and mechanic workshops would reopen on May 4, when the country is set to start lifting a national lockdown put in place to limit the spread of the coronavirus. A package of health and safety measures for workers and clients will be put in place across the entire network to comply with the rules set by Rome to prepare for a staged restart of economic activities after weeks of national lockdown triggered by the virus outbreak. A vast majority of FCA's dealers and workshops in Italy are run by private operators, while the automaker directly operates some large ones in big cities. FCA this week resumed van production at its Atessa plant in central Italy and some operations in other Italian plants, including preparatory works at its Melfi facility for the final development of Jeep's new hybrid cars, and at Turin's Mirafiori plant for its new electric 500 small car. Related Video:

GM, Ford and Fiat Chrysler set target date for restarting production

The parking lot stands empty at Fiat Chrysler's sprawling Belvidere, Ill., assembly plant. / Getty Images   General Motors, Ford and Fiat Chrysler Automobiles are targeting May 18 to resume some production at their U.S. factories after shutting down plants in March due to the coronavirus outbreak, the Wall Street Journal reported. Executives from the companies in recent days tentatively settled on the timeline following talks with United Auto Workers (UAW) leaders and Michigan Gov. Gretchen Whitmer's office, the Journal said on Monday, citing people familiar with the plans. The head of the UAW union last week warned it was "too soon and too risky" to reopen auto plants and Michigan's economy in early May, citing risks to workers. The companies are working with the union on drawing up safety protocols for reducing exposure risk for workers, but haven't finalized those terms yet, according to the WSJ report. GM, Ford, Fiat Chrysler and UAW did not immediately respond to Reuters requests for comment.   Plants/Manufacturing Chrysler Fiat Ford GM coronavirus

UAW warns automakers: Restarting U.S. plants is 'too soon and too risky'

WASHINGTON/WARREN, Mich. — The head of the United Auto Workers union on Thursday said it was "too soon and too risky" to reopen auto plants and Michigan's economy in early May, citing insufficient scientific data and coronavirus testing to assure workplaces are safe. The warning from UAW President Rory Gamble on Thursday afternoon came as General Motors Co , Ford Motor Co and Toyota Motor Corp took new steps toward reopening North American vehicle manufacturing operations in an environment where consumer demand is uncertain and worker safety paramount. The union has said that 24 of its members have died from Covid-19, though it was unclear whether they might have become infected in the workplace. Unionized Detroit automakers and non-union German and Asian automakers have been preparing to restart U.S. vehicle making operations by early May. Companies have shifted reopening dates amid uncertainty about government stay-at-home orders. Gamble's statement appeared to derail plans by the Detroit Three to start bringing UAW workers back to vehicle manufacturing jobs on May 4. The longer the automakers cannot produce profitable U.S.-made trucks and sport utility vehicles, the longer they burn cash. The UAW leader's statement was also aimed at Michigan Gov. Gretchen Whitmer, who has come under pressure from conservative groups and President Donald Trump to ease coronavirus stay-at-home restrictions. "At this point in time, the UAW does not believe the scientific data is conclusive that it is safe to have our members back in the workplace. We have not done enough testing to really understand the threat our members face," Gamble said. "We strongly suggest to our companies in all sectors that an early May date is too soon and too risky to our members, their families and their communities." Gamble said the union was "happy with the auto companiesÂ’ response and cooperation on working through the health and safety protocols we will need in the workplace when it is appropriate to restart." Earlier Thursday, GM began notifying front line managers to come back to work next week to get trained on new safety protocols designed to prevent the spread of the novel coronavirus as workers return to plants.

FCA to recall 318,000 vehicles for faulty backup camera software

An array of 2019 and 2020 FCA vehicles are being recalled over faulty backup camera software that doesn’t meet federal regulations. According to recall documents, the backup camera may not turn off “until a drive cycle ends.” ThatÂ’s far longer than the 10-second linger time allowed by the rules, so FCA has to recall all of the vehicles to implement a fix. WeÂ’ve listed all of the vehicles involved below. 2020 Jeep Gladiator 2020 Jeep Cherokee 2019-2020 Ram 1500 2019-2020 Ram 2500  2019-2020 Ram 3500 2019-2020 Chrysler Pacifica 2019-2020 Dodge Durango 2019-2020 Jeep Grand Cherokee 2019-2020 Jeep Wrangler 2019-2020 Jeep Renegade 2019 Dodge Challenger ItÂ’s an extensive list encompassing a huge chunk of FCAÂ’s lineup in the United States. In total, FCA is recalling 318,537 vehicles. They must be equipped with the 8.4-inch or 12-inch infotainment system for the problem to present itself. FCA expects the recall to start on May 22 this year and will begin to notify owners soon. To fix the vehicles that may be affected, FCA plans to update the infotainment system at the dealer or over-the-air. If youÂ’ve noticed a screen thatÂ’s sluggish to relinquish its hold on the backup camera feed (or maybe never does), then you have this recall to look forward to. Update: FCA has provided additional information about the repair methodology. Customers will be able to receive an update over the air or have their cars updated at the dealership. Customers will begin receiving notifications this month. Related video: Recalls Chrysler Dodge Jeep Crossover Minivan/Van SUV

Fiat Chrysler starts production of ventilator components in Italy

MILAN — Fiat Chrysler has begun producing ventilator parts to help Italy's Siare Engineering boost its output of the medical equipment needed to treat patients during the coronavirus crisis, the carmaker said on Friday. Carmakers around the world are ramping up production of critical healthcare products and machines to respond to the enormous demand during the pandemic. Italy, the epicenter of the virus outbreak in Europe, had asked Siare to triple its normal monthly production as a part of government efforts to increase the number of intensive care beds. FCA said that with the support of luxury group Ferrari and holding company Exor, which controls both carmakers, it had produced the first electrovalves, a key part in ventilators, at its plant in Cento, in northern Italy. The Cento plant is usually used to produces high-performance car engines for the global market. It had been closed because of the coronavirus but has partially reopened for this project. "With the additional supply of electrovalves from Cento, Siare estimates that it will be able to reduce total production time for ventilators by as much as 30-50%", the statement said. In addition to the production of the electrovalves, a team of specialists from FCA is also working alongside Siare staff at their production facility near the city of Bologna. "The objective is to help increase Siare's total production, with a gradual scaling up of daily output beginning from the first week of April", FCA said.

Lee Iacocca’s 10,000-square-foot Bel Air mansion hits the market

We’ve seen the auctioning off of much of the estate of the late, famed auto executive and former Chrysler CEO Lee Iacocca, who died last year at age 94, including his 1992 Dodge Viper and wood-sided 1986 Chrysler LeBaron Town & Country Convertible. Now comes his former Southern California mansion, which has hit the market for a cool $26.9 million. The Tuscan-style mansion in the tony Bel Air section of Los Angeles is where Iacocca lived following his retirement from Chrysler and the automotive industry in 1992. According to the website TopTenRealEstateDeals.com, itÂ’s a 10,682 square-foot, five-bedroom, eight-bath palace on 1 acre near the Bel Air Country Club. It comes with four ensuite guest rooms, a separate staff apartment, formal living and dining rooms, a wood-paneled library and five (!) fireplaces. High ceilings, chandeliers and expensive wood trim and moulding work abound. ItÂ’s also tailor-made for entertaining, with big open-plan rooms opening to landscaped terraces, a chefÂ’s kitchen, a swimming pool, spa and tennis courts. And in fact, Iacocca was said to have entertained the likes of Bob and Delores Hope, Frank and Barbara Sinatra, Priscilla Presley and Betty White. Oddly, considering Iacocca was one of the first celebrity auto execs, thereÂ’s no information about the estateÂ’s garage; Autoblog has inquired about that with the listing agents and will update this if we hear back. In the overhead view in the gallery above, the driveway leads to the large wing on the left side of the house, so the garage is potentially pretty big, but it's hard to say what else might share space under that roof. Aside from his work developing the iconic Ford Mustang in the 1960s, Iacocca is perhaps best known to generations of Americans for his role rescuing Chrysler from collapse. He did so by securing a $1.2 billion federal loan from Congress, restructuring the company by cutting wages and closing plants introducing popular fuel-efficient cars like the K Car and introducing the minivan. After his retirement in 1992, Iacocca invested in casinos and a line of imported olive oil, and he was a member of several corporate boards.   Featured Gallery Lee Iacocca's Bel Air mansion View 11 Photos Celebrities Chrysler

Fiat Chrysler, GM are trying 7-year 0% loans, online buying to lift plunging sales

With auto showrooms shut during the coronavirus pandemic, Fiat Chrysler and General Motors moved to reboot demand with seven-year, no-interest loans and programs allowing customers to buy vehicles online. Fiat Chrysler Automobiles' new "Drive Forward" marketing program includes online shopping tools that will for the first time allow U.S. customers to complete the purchase of a vehicle through an FCA dealer without setting foot in a dealership, a company spokesman said. The move toward online sales and home delivery breaks with a long U.S. auto sector tradition of manufacturers giving franchised dealers control of sales to consumers. Dealers have fought Tesla 's efforts to sell vehicles directly to consumers through its website. GM and Fiat Chrysler's promotions of extended, no-interest loans — made less costly by the Federal Reserve's recent interest rate cuts — echo the "Keep America Rolling" sales push GM launched to jump start a paralyzed consumer market after the Sept. 11, 2001, attacks. But the pandemic has been pulling auto retailing into the digital age, with dealerships shuttered across the country and sales likely to take a further beating in April as social distancing guidelines remain in place.   Related: Auto sales drop in March as coronavirus hits demand, output   FCA shares were down 4.9% to $6.84 in afternoon trading in New York after the company posted a 10% drop in first-quarter U.S. auto sales, as the pandemic hurt demand and halted production from mid-March. The company, however, did not break out sales by month. General Motors reported its first-quarter sales fell 7% because of significant declines in March, and said customers can use its existing "Shop.Click.Drive." program to find, purchase and arrange for home delivery of a vehicle. A GM spokeswoman said across the Chevrolet, Buick, GMC and Cadillac brands the automaker has seen two to four times greater online site visits and sales leads than before the pandemic. Hyundai said earlier that its U.S. sales fell 43% in March due to the pandemic. "It goes without saying that the entire world is facing a tremendous challenge that is having a significant impact on business and our normal way of life," Randy Parker, vice president for sales at Hyundai Motor America, said in a statement. Toyota said its sales were down nearly 37% in March and 8.8% for the quarter. Nissan reported a 27% drop in first-quarter sales.

Ford delays North American production restart from coronavirus lockdown

Ford said on Tuesday it was postponing its plan to restart production at its North American plants due to safety concerns for its workers amid the coronavirus pandemic. To generate cash, the No. 2 U.S. automaker had said last week it was poised to restart production at some plants in North America as early as April 6, bringing back such profitable vehicles as its top-selling F-150 full-sized pickup, the Transit commercial van and SUVs. But on Tuesday, Ford said it had been aiming to resume production at several key U.S. plants on April 14, but would now instead do so at dates it would announce later on. "The health and safety of our workforce, dealers, customers, partners and communities remains our highest priority," Kumar Galhotra, president of Ford's North American operations, said in a statement. Still, the automaker will open a plant in Ypsilanti, Michigan, during the week of April 20, that will make ventilators to treat patients afflicted by the coronavirus. Rival Fiat Chrysler Automobiles said last week it plans to resume production in North America on April 13. General Motors has shuttered its plants indefinitely and has not provided a date for vehicle production to restart. It is facing a delay in the production launch of its redesigned large SUVs and is delaying work on other SUVs. "Once it is safe to resume production, we will do so," a GM spokesman said. As of Monday, Volkswagen was shooting for an April 5 reopening at its Tennessee plant. Honda, Nissan and Subaru facilities in North America will remain closed through April 6, and Hyundai through April 10. Toyota was planning to reopen its North American plants April 17. Plants/Manufacturing Chrysler Fiat Ford GM coronavirus