1952 - Chevrolet Other on 2040-cars
Bloomingdale, New Jersey, United States
This restoration project is just what you've been looking for. this vehicle was found parked in a barn so it hasn't been exposed to the elements for a while. it has 47,196.5 miles on the engine. starts easily and does not smoke a bit. engine is clean with many new parts. interiour need to be reupholstered but the frames and springs are in great shape. If so desired ( in the right state) this vehicle can be tagged and driven right away everything works with the exception of the generator or voltage regulator (not sure) it will although, drive for days with a fully charged battery. there is no visible body cancer. rocker panels are intact. Doors open and close without needing any fuge. Its all original glass from 1952. the only body blemish is a spot on the passenger rear quarter. A piece of fiberglass from some previous body work has peeled up. (I personally haven't done any body work to it. it was done before I acquired this beauty) Although this vehicle is not intact all the parts are present. they just need to be re installed ( only door panels, trim and such) It comes with many spare parts 3 speed manual transmission, bellhousing, flywheel with cover (new) clutch and pressure plate, intake and exhaust manifold with carburetor, oil filter housing, valve cover, rocker arm carriage with rocker arms and springs, exhaust pipe cover tube (new), distributor, starter (disassembled), thermostat gooseneck with gasket (new), many new gaskets in factory box.
Chevrolet Other Pickups for Sale
1952 - chevrolet other pickups(US $7,000.00)
2005 - chevrolet other pickups(US $12,000.00)
No reserve !!1956 chevy blown pick up truck / chevrolet blower shop hot rod
1952 52 chevy " old navy " truck * very cool hot rod chevorlet $$ no reserve $$
1947 chevy pickup 3100, show truck, street rod, custom built, lowered, hot rod
Barn find 1950 chevrolet 3100 1/2 ton pickup truck patina rat rod gmc 1947 1953
Auto Services in New Jersey
Tony`s Auto Service ★★★★★
T&T/PH Automotive Repair Spcl. ★★★★★
T & D Automotive Inc ★★★★★
Super Towing ★★★★★
Summit Auto Repair ★★★★★
Station Auto Repair ★★★★★
Auto blog
Regular-cab, short-bed Chevy Silverado Trail Boss pickup looks great
Fri, Jul 30 2021For all the wild popularity of full-size pickups, there's one configuration that U.S. buyers are no longer offered: the regular-cab, short-bed truck. Interestingly, however, GM still does make this configuration, and both the Chevrolet Silverado and the GMC Sierra are offered with it — in the Mexican market. That body style, however, is available solely in ultra-basic work-truck form. But a custom wheel shop, JC Wheels in the Mexican city of Culiacan, has converted one of these Silverados to Trail Boss trim, and we're digging the result. The sporty shorty Silverado Trail Boss comes to our attention via GM Authority, after the shop posted it on their Instagram feed. The shop added a 3-inch lift, assist steps, Chevy alloy wheels, a Trail Boss front fascia including red tow hooks, and Trail Boss badging. They also added dark window tint, which seems like a good idea in sunny Mexico. In the U.S., the Silverado Trail Boss isn't offered at all in regular-cab form; it only can be had as a double cab or a crew cab, the latter with a choice of a short bed or standard bed. But size is often a hindrance for trucks that actually get driven on trails, where this regular-cab, short-bed variant's smaller wheelbase would be an advantage. Beyond that, the Trail Boss upgrades keep this configuration from looking like a basic-spec machine. That's even more true of the same outfit's previous efforts: the conversion of the GMC Sierra regular-cab, short-bed pickup into a Denali. With so many buyers choosing pickups as personal-use vehicles, it's not hard to think that this configuration could find an audience here. But the key would be to do as this Mexican firm has done and offer it in the desirable off-road and luxury trims, rather than as a basic work truck. Would you buy one? Sound off in the comments below. The next step would be to use this configuration as the basis of a full-size, two-door SUV, in the mold of the classic Chevy K5 Blazer and GMC Jimmy.
Watch this time-lapse build of the Chevy SS for NASCAR
Fri, 08 Feb 2013There's only about a week left until we get our first look at the production version of the 2014 Chevrolet SS sedan, but Chevrolet NASCAR teams have been looking at the race version of the car all winter. Autoweek has posted a really neat time-lapse video showing just a portion of what it takes to build one of NASCAR's new Gen6 stock cars.
Though the video is quite brief, it does show almost the entire build process starting with just the car's nose, and it gives us a good look at how integral the template is to the final product. As a bonus, Hendrick Motorsports also provided some videos showing two of its teams performing pit stop tests over the winter. The second video shows some of the more detailed aspects of the racecar's rear end, including the stock-looking trunk cutout and a newly mandated rear bumper extension that will be used on super speedways like Daytona and Talladega.
To see what Team Chevy has been up to all off-season, check out all three videos posted after the jump.
Camaro chief: 'rock-star' 4-cylinder set for Mustang fight
Wed, Jul 8 2015It was inevitable, the 2016 Chevy Camaro had to have a four-cylinder engine. The archrival Ford Mustang packs a spunky 2.3-liter EcoBoost four-banger, and everyone from BMW to Subaru uses four-cylinders to great effect to power their sports cars. Now it's Chevy's turn. Again. The Camaro ran the infamous Iron Duke four-cylinder with 88 to 92 horsepower in the 1980s. It was a fuel-economy play at a time when performance was not a priority. After the 1970s muscle-car era, output even for the V8s didn't top 200 hp again until the mid-'80s. Thankfully for enthusiasts, things have changed dramatically in the last 30 years. The gen six Camaro will offer a 2.0-liter inline four-cylinder with 275 horsepower. It's the standard engine, slotting below the 335-hp V6 and the 455-hp V8. But don't mistake the new I4 for an Iron Duke encore. Camaro chief engineer Al Oppenheiser called it a "rock star" and said cars equipped with it feel lighter than V6 models. The four-cylinder (295 pound-feet at 3,000-4,500 rpm) also summons more torque in quicker fashion than the V6 (284 lb-ft at 5,300 rpm). Chevy expects the Camaro to hit 60 miles per hour in "well under six seconds," according to press materials. The Mustang EcoBoost (310 hp, 320 lb-ft) clocks times in the low to mid five-second range. "We're not doing it just so we have one," Oppenheiser said. "We're not doing it because like in gen three you're forced to do it because of fuel economy. We're doing it because it belongs in the car. It has a distinct character." Speaking with Autoblog recently at the Detroit Grand Prix racecourse on Belle Isle, Oppenheiser said he expects the I4 to attract a younger crowd to the Camaro and will put up stiff competition against the V6 for sales. "I've read blogs where younger folks won't buy a Camaro because it doesn't have a 2.0-liter turbo or a turbocharged four-cylinder," he said. "So we're going to excite them." While we talked a lot about four-cylinder engines, Oppenheiser also elaborated on the V6 (It's pretty damn good, too. We drove it.) and the new Alpha platform that the Camaro borrowed from Cadillac. Here's the rest of our edited conversation. Autoblog: Talk a little bit about the four-cylinder – the first turbo four-cylinder ever for Camaro. Do you have any idea what the take rate's going to be? Al Oppenheiser: I think it's going to surprise a lot of people. It's actually a fun car to drive. It's got a really good balance of turbo noise and exhaust note.
