2013 Chevrolet Cruze Lt Sedan 4-door 1.4l on 2040-cars

Auto blog

GM warning 800,000 owners that their cars may need oil changes more frequently than they say

The days of changing your engine oil every 3,000 miles are long gone thanks to most cars having automatic oil monitoring systems, but about 800,000 General Motors vehicles apparently have incorrect monitoring software that is leading to premature engine component wear. According to Autoweek, certain 2010-2012 Buick LaCrosse, Regal, Chevrolet Equinox and GMC Terrain models equipped with 2.4-liter four-cylinder engines could be going too long in between oil changes resulting in a higher-than-normal number of warranty claims for the engine's balance chain. The balance chain links the balance shaft to the crankshaft, and a worn one can produce higher noise levels.
As a fix, GM dealers will be reprogramming the software for the monitors in an effort to reduce the interval between oil changes, which varies based on driving habits and conditions. Through February 2015, the software update will be done at no cost to vehicle owners, but since this is not a recall, after that point, it will be up to the discretion of dealers as to whether or not they will charge for the service. What isn't immediately clear is whether GM plans on giving assistance to out-of-warranty customers who are experiencing engine issues from the worn chain.

2016 Chevrolet Colorado Diesel First Drive [w/video]

The first thing you notice inside the diesel Chevy Colorado is that it's quiet. Almost too quiet. A lot has been done to quell noise and vibration with this new powertrain, and it shows – or rather, doesn't. There's some characteristic diesel clatter at idle, but even then it's distant and practically disappears as you start moving down the road. At full throttle, when the engine is at its noisiest, the sound isn't particularly diesel-like, just a pleasant intake breath. The accompanying smoothness is almost eerie. When we ask where all the noise went, Chevy's engineers, marketing guys, and PR reps all explain that this refinement is what Americans want. We're still not sure. This is a truck, after all, and the diesel pickup customer is different from the guy buying a diesel Cruze for his highway commute. Chevy contends that they're also not the same as the buyer of a Silverado HD. Although this 2.8-liter Duramax four-cylinder has been in service elsewhere around the globe, its first US application is in the Colorado and its GMC Canyon twin. The engine puts out 181 horsepower and 369 pound-feet of torque, and it does so unobtrusively as a result of a lot of modifications for our market. To keep normal diesel sensations out of the cabin, the intake and oil pan both get acoustic treatments. A new, thicker material is used for firewall sound deadening. Redesigned balance shafts have tighter tolerances to increase smoothness. The diesel powertrain is smoother than the Colorado's gasoline V6. One of the more interesting and certainly unexpected vibration-reduction changes is a special torque converter from German supplier LuK equipped with a centrifugal pendulum absorber. This pendulum spreads from the center of the torque converter as engine speed increases and is tuned to absorb the four-cylinder's second-order vibrations, not just those in a narrow frequency band. It does an admirable job, especially considering the engine's biggish, 0.7-liter cylinders, which lead to bigger vibrations. The result is a powertrain that's smoother than GM's (not particularly smooth) corporate V6, which is available in the standard Colorado. It's quieter than a Cruze diesel and even out-softens some gas direct-injection engines on the market. Paradoxically, it may be the most refined of all of the Colorados. No vibration comes through the steering wheel, pedals, floorboards, or even the rearview mirror. But you can tell it's a diesel when you hit the throttle.

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.