2019 Chevrolet Tahoe Lt on 2040-cars

Auto blog

Chevy Malibu will become 45-mpg strong hybrid with next update

Come next year there'll be no more mild hybrid pretensions for the Chevrolet Malibu - the next-generation sedan will borrow technology from the 2016 Volt and get a proper hybrid powertrain. A 1.8-liter four-cylinder engine gets help from a two-motor drive unit adapted from the Volt for 182 system horsepower, the motor drive powered by an 80-cell, 1.5-kWh lithium-ion battery. Chevrolet says that when combined with features like grille shutters and a lower ride height, it expects the Malibu Hybrid will post a combined fuel economy rating of more than 45 miles per gallon, which would best the hybrid trims of the Ford Fusion, Toyota Camry and Hyundai Sonata. Electric power alone can power the car up to 55 miles per hour, and The Bowtie's first use of exhaust gas heat recovery will help maintain high hybrid performance in cold weather and be used to heat the engine and cabin. The Malibu Hybrid should go on sale in the Spring of next year, for now there's a press release below. Chevrolet Malibu Hybrid Derives Technology from Volt GM estimates combined fuel economy ratings to exceed 45 mpg DETROIT, 2015-03-25 – Chevrolet's recent production announcement of its all-electric vehicle based on the Bolt EV concept, as well as the introduction of the 2016 Chevrolet Volt, will be joined by a strong hybrid version of the next-generation Malibu. Using technology from the 2016 Chevrolet Volt propulsion system, Malibu Hybrid will offer an estimated combined fuel economy rating exceeding 45 mpg, higher than the combined mileage ratings of the Ford Fusion, Toyota Camry and Hyundai Sonata hybrid variants. "The 2016 Malibu Hybrid will offer impressive fuel economy, exceptional driving characteristics and gorgeous styling," said Jesse Ortega, Chevrolet Malibu chief engineer. "Besides leveraging innovation from the Chevrolet Volt, the Malibu Hybrid also has unique features that help improve aerodynamics, like upper and lower grille air shutters to improve airflow and a reduced ride height, all of which help reduce fuel consumption," Ortega said. An all-new direct-injection 1.8L 4-cylinder engine mated to a two-motor drive unit slightly modified from the 2016 Chevrolet Volt drive unit powers the Malibu Hybrid. The drive unit provides additional power to assist the engine during acceleration, for 182 horsepower (136 kW) of total system power.

Very first Chevy Camaro found and restored

Restoring an important classic car can lead people down rabbit hole upon rabbit hole of discovered history in a process that's essentially automotive genealogy. Take the recent rejuvenation of the very first Chevrolet Camaro as an example. The owners started with a strong hunch that the vehicle might be something special and spent years researching to figure it all out before the mechanical work even began. Fisher Body kicked off work on the first Camaro on May 17, 1966, and it was delivered to General Motors just a few days later for final assembly. While the model has earned a place as an American performance icon since then, the original was built more to develop the production process and boasted just a 230-cubic-inch (3.8-liter) inline six and 3-speed transmission. After spending its first few months appearing in promotions, a Chevy dealer in Oklahoma got the gold car in December of '66. It was touted on the sales floor there for years, and the first private owner didn't come until 1969. This short documentary goes into astonishingly comprehensive detail about every bit of the first Camaro's history. If you just want to hear the story of the latest owners and their work to get the vehicle restored since 2010, skip about 11 minutes into the video. Or, of course, you could just enjoy the whole thing. News Source: PilotCarRegistry via YouTube, Camaro NewsTip: Chris P. Chevrolet Automotive History Auto Repair Maintenance Coupe Classics Videos history

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: