Stunning Show Quality Real 1970 Cherolet Chevelle 396 Ss Extreme Quality Build on 2040-cars

Auto blog

Camaro chief: 'rock-star' 4-cylinder set for Mustang fight

It was inevitable, the 2016 Chevy Camaro had to have a four-cylinder engine. The archrival Ford Mustang packs a spunky 2.3-liter EcoBoost four-banger, and everyone from BMW to Subaru uses four-cylinders to great effect to power their sports cars. Now it's Chevy's turn. Again. The Camaro ran the infamous Iron Duke four-cylinder with 88 to 92 horsepower in the 1980s. It was a fuel-economy play at a time when performance was not a priority. After the 1970s muscle-car era, output even for the V8s didn't top 200 hp again until the mid-'80s. Thankfully for enthusiasts, things have changed dramatically in the last 30 years. The gen six Camaro will offer a 2.0-liter inline four-cylinder with 275 horsepower. It's the standard engine, slotting below the 335-hp V6 and the 455-hp V8. But don't mistake the new I4 for an Iron Duke encore. Camaro chief engineer Al Oppenheiser called it a "rock star" and said cars equipped with it feel lighter than V6 models. The four-cylinder (295 pound-feet at 3,000-4,500 rpm) also summons more torque in quicker fashion than the V6 (284 lb-ft at 5,300 rpm). Chevy expects the Camaro to hit 60 miles per hour in "well under six seconds," according to press materials. The Mustang EcoBoost (310 hp, 320 lb-ft) clocks times in the low to mid five-second range. "We're not doing it just so we have one," Oppenheiser said. "We're not doing it because like in gen three you're forced to do it because of fuel economy. We're doing it because it belongs in the car. It has a distinct character." Speaking with Autoblog recently at the Detroit Grand Prix racecourse on Belle Isle, Oppenheiser said he expects the I4 to attract a younger crowd to the Camaro and will put up stiff competition against the V6 for sales. "I've read blogs where younger folks won't buy a Camaro because it doesn't have a 2.0-liter turbo or a turbocharged four-cylinder," he said. "So we're going to excite them." While we talked a lot about four-cylinder engines, Oppenheiser also elaborated on the V6 (It's pretty damn good, too. We drove it.) and the new Alpha platform that the Camaro borrowed from Cadillac. Here's the rest of our edited conversation. Autoblog: Talk a little bit about the four-cylinder – the first turbo four-cylinder ever for Camaro. Do you have any idea what the take rate's going to be? Al Oppenheiser: I think it's going to surprise a lot of people. It's actually a fun car to drive. It's got a really good balance of turbo noise and exhaust note.

2015 SEMA Show Recap | Autoblog Minute

We take a trip to Las Vegas for a preview of the 2015 SEMA Show, the trade show for automotive aftermarket professionals and enthusiasts. Autoblog's Eddie Sabatini reports on this edition of Autoblog Minute, with commentary from Senior editor, Greg Migliore. Chevrolet Ford Honda Mazda Autoblog Minute Videos Original Video galpin

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.