Blog

AWD turbodiesel Equinox, Terrain dropped for 2020

Citing low demand, General Motors is dropping the AWD diesel options off the Chevrolet Equinox and GMC Terrain roster. Chevrolet spokesman Kevin Kelly confirmed to CarsDirect that for 2020, the diesel versions of these SUVs will only be offered with front-wheel-drive. CarsDirect notes that with the AWD diesel Equinox and Terrain gone, the only AWD diesel option in this class is the Mazda CX-5 Skyactiv diesel, which is significantly more expensive: As the AWD diesel CX-5 is only available in a fully loaded Signature specification, the $42,045 price tag is almost $10k heftier than the cheapest comparable Equinox, the AWD 1.6-liter diesel LT which starts from $32,495. The 2019 GMC Terrain AWD SLE costs $34,795 in comparison, which works out to being around $7,200 cheaper than the Mazda. The higher trim levels for the Equinox and Terrain are Premier and SLT, respectively. Some reasoning behind the AWD diesel GM SUV's low uptake is their own price difference to base FWD gasoline models: you can get a 1.5-liter Equinox for less than §25,000 listed. While the 2.2-liter Mazda has plenty more power at 168 hp and 290 lb-ft, compared to 137hp and 240 lb-ft in the 1.6-liter GM SUVs, the Equinox and Terrain are notably more frugal – they are rated 32mpg combined, while the Mazda can manage 28 mpg. With better fuel economy and a significantly lower list price, the General Motors twins are at least more wallet-friendly when it comes to numbers, and as the vehicles will cease to be built in that configuration there's likely to be some cash on the hood on ones in stock. News Source: CarsDirectImage Credit: Chevrolet Chevrolet GM GMC confirmed gmc terrain chevrolet equinox

2019 Kia Niro EV starts at $1,500 more than Hyundai Kona Electric

Pricing for the 2019 Kia Niro EV has been revealed, and it has the highest starting price of any Hyundai or Kia electric car that we know the price of right now – assuming the Soul EV won't be pricier. The base price for the Niro EV EX is $39,495 before the federal tax credit. With the credit, the price falls to $31,995. The top trim Niro EV EX Premium jumps up to $44,995 before the credit, and $37,495 after it. For the extra $5,500, the Niro EV EX Premium adds a sunroof, real leather trim, heated and ventilated front seats, eight-inch touchscreen, navigation and wireless phone charging. The standard Niro EV is still well-equipped with standard adaptive cruise control, seven-inch touchscreen, lane centering, automatic emergency braking and blind-spot warning. Each also comes with standard DC fast charging capability. In comparison, the 2019 Hyundai Kona Electric starts at $37,995 ($30,495 with tax credit), which is $1,500 less than the Niro. The Kona is a bit smaller than the Niro, though it also offers more range than the Niro with 258 miles versus 239. The Chevy Bolt EV's base price is the cheapest at $37,495, but the tax credit has been reduced for the Chevy to $3,750 – and Chevy isn't dropping the price any to compensate. That means with the credit, the Bolt EV ends up the most expensive of these three at $33,745. The Bolt EV doesn't include DC fast charging as standard, either, and its EPA-rated range is a mile shy of the Niro's.

2020 Lincoln Corsair Review & Buying Guide | Old-school, value-priced luxury

The 2020 Lincoln Corsair is a compelling alternative to the compact luxury crossover establishment. It’s distinctively stylish inside and out, very spacious, and it clearly focuses on comfort rather than performance. Not only that, it has a base price that's thousands of dollars cheaper than its German rivals. It has a couple of drawbacks. Its quest for comfort does sacrifice some of its handling capability, and its overseas rivals still have nicer cabin materials. But there are enough positives that youÂ’ll still want to give the Corsair a closer look. What's new for 2020? The Lincoln Corsair is a completely new model introduced this year. It replaces the Lincoln MKC, and like that crossover, the Corsair still shares its platform with the Ford Escape. 2020 Lincoln Corsair Beyond Blue interior View 9 Photos What's the Corsair's interior and in-car technology like? While the Corsair is based on the Ford Escape, you wouldnÂ’t be able to tell from the inside, and thatÂ’s a very good thing. The little Lincoln crossover has a unique interior, both in relation to the Escape and to the rest of its luxury segment. There's nothing remotely like it. The dashboard itself is low and wide, emphasized by the split-level design and the faux full-width air vent. The center stack has a cantilevered design that floats above the center console area and features chrome-plated switches and knobs. Base models get a stylish pinstriped aluminum trim panel on the dash paired with one of three upholstery color options including black, gray and beige. However, the Reserve steps things up considerably with differing wood and metal trim choices that correspond to the expanded leather color options that include a camel tan and dark turquoise (pictured above). All Corsairs get an 8-inch touchscreen infotainment system mounted high on the dash within easy sight and reach. It uses a reskinned version of the latest Ford SYNC interface. The layout is straightforward and easy to navigate, and the more muted color options on the Lincoln system are easier on the eyes than the stark white Ford version. ItÂ’s a little bit slow to load new menus, though, and this carries over to the optional 12.3-inch instrument cluster screen available on the Reserve trim. The Corsair comes standard with an analog instrument cluster with a 6.5-inch info screen. We appreciate that many stereo and climate controls have dedicated switches and knobs on the center stack, and they have a nice heft to their actions.

Junkyard Gem: 1985 Bertone X1/9

Sales of the Fiat X1/9 began in the United States in 1974, and the price tag was very reasonable for a mid-engined Italian two-seater. For a time, these cars were common sights on American streets, at least in non-rusty areas. Then Americans became disillusioned with the Fiat brand, and the company folded its tent and departed the continent after 1982, not returning until 2010. Automotive dealmaker Malcolm Bricklin saw an opportunity at that point, and his company began bringing in 124 Sport Spiders badged as Pininfarinas and X1/9s badged as Bertones. Here's an '85 Bertone in a California wrecking yard. Fiat had hired Bertone to design the X1/9 in the first place, so the badging change wasn't so jarring to those Americans familiar with the car's history. Bricklin introduced Subaru cars to the United States in the late 1960s, started his own car company in the middle 1970s, then went on to bring a Yugoslavian-built Fiat 127 variant to these shores, via the same company that was already bringing in the X1/9. Power came from what amounted to a Fiat 128 engine/transaxle assembly, mounted just behind the rear window. In 1985, the Bertone X1/9 had 75 horsepower and weighed just over a ton. This car still has the allegedly valuable hardtop. I'm pretty sure that every American X1/9 owner has several of these stashed away by now. Optimistically, Bertone used a six-digit odometer in this car. 188,285 miles would have been pretty respectable in a 1985 Corolla, never mind a Fiat known for shaky electrical systems and poor build quality. I still see quite a few X1/9s in the big self-service wrecking yards, and even more 124 Sport Spiders. The seat upholstery is very stylish. I checked this car's VIN on the California smog-check database, which shows that it last passed the emissions test in 2009. Perhaps something broke soon after that and the car awaited repairs that never came. It has both a trunk and a frunk. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Just a thing for a nice leisurely drive on a salt flat.

Mitsubishi Shogun Sport SVP Concept is the offroad Mitsu we want

The Mitsubishi Shogun Sport SVP Concept just debuted at the Commercial Vehicle Show in the U.K. For those unaware of the Shogun Sport's origins, it's a Mitsubishi Triton-based SUV with truck-like off-road capability. This concept raises the bar for what's possible with this big SUV when the terrain gets rough. Mitsubishi and some aftermarket suppliers have given the truck some impressive modifications. For one, it has a 40 mm wider track and new offroad suspension. Walkinshaw Performance Limited and Koni both helped with new components and the suspension tuning. BF Goodrich all-terrain tires wrap new Predator 18-inch off-road wheels with a red outer rim design. Then to give the sides of the Shogun Sport more clearance while rock crawling, Mitsubishi fitted raised side steps finished in black. Other trail-ready add-ons include the big LED light bar and rally-style PIAA driving lamps on the grille. Mitsubishi has changed up the design a bit by adding a new colored grille, massive decal package and a big hatch lid badge. The interior gets a few new bits like heavier bolstered seats, red LED mood lighting and special patterns used throughout. Of course, we don't get the Shogun Sport in the United States. This concept happens to use Mitsubishi's 2.4-liter turbo-diesel four-cylinder, which makes 181 horsepower and 317 pound-feet of torque. Mitsubishi has recently talked about a return to trucks in America, but nothing certain is in the pipeline for now. Meanwhile, we just got our first look at Mitsubishi's smallest new crossover yesterday, the 2020 Outlander Sport.

Aston Martin Vantage AMR equipped with a stick shift to honor Le Mans win

Where and how a car debuts can say a lot about that vehicle. With the newest Aston Martin, the message is clear: It's all about the lasting visceral connection between driver and automobile. The Vantage AMR, with a manual transmission and a twin-turbocharged V8, debuted today at the 6 Hours of Spa-Francorchamps, the second-to-last race in the 2018-2019 FIA World Endurance Championship. Of the 200 examples, 59 will be available with special "Vantage 59" trimmings. We've known a manual-transmission Vantage was on the way for some time, but as our previous report said, this is the first time the Mercedes-AMG-sourced engine has been paired with a stick. So it expectedly took some time to develop. The brawny power source beneath the Vantage's hood is a 4.0-liter twin-turbocharged V8. It is rated at 503 horsepower at 6,000 rpm and 461 lb-ft of torque at 2,000 rpm. It has a top speed of 195 mph and has a claimed zero-to-60 time of 3.9 seconds. The AMR's stats are slightly down from the base Vantage due to use of the Graziano-developed seven-speed transmission. The automatic Vantage offers 505 lb-ft of peak torque and has a listed zero-to-60 time of 3.6 seconds. In part due to the change from automatic transmission to manual, the AMR is significantly lighter than the regular Vantage. Switching to standard carbon ceramic brakes also helped the AMR come in 209 pounds lighter, yet Aston says the car maintains its nearly even 50-50 weight distribution. Several technologies aim to keep the AMR's motorsport-inspired driving feel as smooth, quick and efficient as possible. The AMR has a limited-slip differential, adaptive damping (with Sport, Sport+, and Track modes), and AMSHIFT, Aston Martin's version of heel-toe-mimicking rev-matching. The driver selectable transmission aid also allows for full-throttle upshifting. Although Aston Martin is earning the attention and admiration of purists by building a Vantage with a manual transmission, not everybody will be lucky enough to get one. Production is limited to 200 units, with 59 of those cars offered in an extra-limited-edition "Vantage 59" spec (this was similarly done to the DBS). Honoring 60 years since the DBR1's win at the 1959 24 Hours of Le Mans, all Vantage 59 cars will wear Stirling Green and Lime suits. Inside, they get Dark Knight leather, Alcantara trim, and Lime accents. The remaining 141 cars are offered in Sabiro Blue, Onyx Black, China Grey, or White Stone.

2020 Mitsubishi Outlander Sport shows its big, new face in America

The 2020 Mitsubishi Outlander Sport initially showed us its new sheetmetal at the Geneva Motor Show, but we got a chance to check out the vehicle in the flesh at the company's research and development center in Ann Arbor, Mich., today. Nearly everything we learned about the Outlander Sport (known as the ASX in other markets) before applies to the North American version of the vehicle. However, one aspect we were uncertain of was the continued presence of the manual transmission. We asked, and Mitsubishi is officially dropping the stick shift version of the Outlander Sport with this update. It was previously only available on the base trim level, exclusively paired with the 2.0-liter four-cylinder engine. Mitsubishi was one of the last holdouts to offer a manual transmission option in the small crossover market, and now they're officially out. Three-pedal versions of the Outlander Sport represented just 2% of total model sales, so the business case just wasn't there anymore. We confirmed that the powertrains from the 2019 model year car will carry over to the 2020 Outlander Sport, which means you'll have the choice between the 148 horsepower 2.0-liter or the 168 horsepower 2.4-liter four-cylinder. Both engines are paired to a CVT. Of course, all-wheel drive will also continue to be available optionally. The big changes are in the styling that Mitsubishi thinks will make it stand out among competitors. Looking at the crossover directly in the face gives us a real truck-like and rugged vibe. This is where Mitsubishi put most of its eggs, appealing to folks who want a tougher looking vehicle. To our eyes, the execution comes off as a bit haphazard, lacking in cohesiveness with the sheer number of things going on. There's gray satin plastic, piano black plastic and flat black plastic all hanging out next to each other. Then the "shield" sort of juts outward at us, standing in stark contrast with the shiny reflective surfaces on either side of it. Judge for yourself, but the previous design was slick and much simpler than this mash up. Mitsubishi kept things relatively subdued out back, and we like the evolution of the taillights and rear bumper here. There isn't much to speak about down the sides other than a different wheel design and a small fake vent added. One could argue the interior was the Outlander Sport's sorest point, but sadly Mitsubishi chose to neglect this part of the car.

Mary Barra reportedly confirms GM's electric pickup truck plans

According to Motor Authority, CEO Mary Barra confirmed General Motors' intentions to build an electric pickup truck this week. Whether or not it would be an all-new vehicle is unknown. The news comes not even a week after Ford announced a $500 million investment in electric-vehicle startup Rivian. First, electric powertrains were integrated into cars. Then came the crossovers and the SUVs. Naturally, then, the next wave will be pickup trucks. Ford is set to produce an electric F-150, Rivian has the R1T, and now General Motors has reportedly confirmed its plans to introduce a competitor into the field. The article says the topic was brought up in a recent investor call as part of a brief overview of the automaker's electrification strategy. That's where the details end, however, as there is no indication of a timeline, what GM brand would carry the truck, or whether it would be an entirely new product or an adaptation of a current model. The latter seems most likely, which points to the Chevrolet Silverado or the GMC Sierra as possibilities. Chevrolet has been GM's electrification leader this decade with the Bolt and Volt, so an electric Silverado would align well with that messaging and branding. However, an electric pickup would likely be a pricier premium product, which could align it better with GMC. Autoblog has reached out to GM for comment and will update this space when we get a response. Green Rumormill Chevrolet GMC Truck Electric Future Vehicles Mary Barra electric truck chevrolet silverado

Maxwell RHEV Prototype First Drive Review | More than meets the eye

The Maxwell RHEV looks just like any small business' panel van, sporting large vinyl graphics and unassuming steel wheels. You'd have no idea that the co-founders of the startup based out of Seattle had grafted a salvaged Voltec powertrain from a junkyard Chevy Volt into this Ram ProMaster. Somewhere, a battery pack lurks. Maxwell's co-founders, CEO Max Pfeiffer and engineer Trey Camp, open the cargo area to reveal a completely unaltered space. Both are ex-Tesla employees with a long fascination for the #vanlife movement – that their interests intersected in a hybrid cargo van isn't surprising once you start talking to them. This is their first vehicle, a salvaged ProMaster sidelined with a blown 3.6-liter Pentastar, and it's both their prototype and the only Maxwell in existence right now. That said, the company is building a low-roof version for a customer, which will be lighter, have less aero drag and therefore be more efficient. The company is just emerging from a stealth startup mode, and while their backstory is fascinating, I'm still wondering where the Volt's 18.4 kWh battery pack is. "There's nothing in the back ... we're able to get the battery underneath the floor, in the center," Pfeiffer says. Ducking my head under the side reveals, sure enough, a little underside blister that contains the battery, tucked up neatly. The other changes to the RHEV – short for Range-extended Hybrid Electric Vehicle – are minimal. He pops the hood. There are some rough edges, but the 1.5-liter, 101-horsepower engine and 48-kW motor fit comfortably on custom engine mounts and with re-routed exhaust, behind a fascia that improves aero and houses the charge port. Custom axles send power to unaltered Ram hubs and brakes. "This version, it's a little bit prototype-y," Pfeiffer says. "We've had more time to work with the CAD [computer-aided design, engineering drawings] we were able to get from GM and Chrysler, and we've done a better job packaging for production." GM already spent billions on the Voltec and its controlling software, and Maxwell can happily ride those coattails. Despite the help GM has lent Maxwell, there are no official ties. An emulator sends spoofed signals to the Ram instruments, which have a new custom-printed face. The Ram's body control module is left alone. For powertrain faults, Maxwell says the vehicle can theoretically be serviced by any Chevy dealer, and any issue with the rest of the vehicle can be handled by a Ram service shop.

UK car output falls 14% in March, may get worse with no-deal Brexit

LONDON — British car output fell for the 10th month in a row in March, hit by a slowdown in key foreign markets, and the sector stands to suffer a lot more if the country leaves the European Union without a deal, an industry body said on Tuesday. Output tumbled by an annual 14.4 percent to 126,195 cars in March, the Society of Motor Manufacturers and Traders said. Exports, which account for nearly four out of every five cars made in Britain, were down by 13.4 percent. The SMMT said analysis it had commissioned predicted output would fall this year to 1.36 million units from 1.52 million in 2018, assuming London can secure a transition deal with the EU. If Britain has to rely instead on World Trade Organization rules for its trade with the bloc, which include import tariffs, output is forecast to fall by around 30 percent to 1.07 million units in 2021, returning to mid-1980s levels, the SMMT said. The forecasts were produced for SMMT by AutoAnalysis, a consultancy. Prime Minister Theresa May has secured a delay to the Brexit deadline until Oct. 31, giving her more time to try to break an impasse in parliament over the terms of Britain's departure from the EU. Foreign minister Jeremy Hunt traveled to Japan earlier this month to try to persuade the Japanese government and Toyota, which has a big presence in Britain, that London was determined to avoid a no-deal Brexit. "Just a few years ago, industry was on track to produce 2 million cars by 2020 — a target now impossible with Britain's reputation as stable and attractive business environment undermined," SMMT chief executive Mike Hawes said. "All parties must find a compromise urgently so we can set about repairing the damage and diverting energy and investment to the technological challenges that will define the future of the global industry." (Reporting by William Schomberg, editing by David Milliken)

Amazon can now deliver packages to some Ford and Lincoln vehicles

Nothing succeeds without complications popping up along the way. Sure, Amazon's Prime delivery services have made shopping more convenient than brushing your teeth, but leaving millions of packages on doorsteps comes with an inherent danger: Thieves might swipe them without anybody knowing. Amazon's solution is called Amazon Key, which allows delivery men and women to enter a customer's house or car to drop off a package. This week, Ford and Lincoln announced they would be partnering with Amazon to integrate the service into some of their vehicles. Ford is following in the footsteps of Volvo and General Motors, as both companies announced their participation about a year ago. That includes Cadillac, Chevrolet, Buick, and GMC. Key will be made available for 2017-and-newer Fords equipped with FordPass Connect, and 2018-and-later Lincolns with Lincoln Connect. Key is not available everywhere, but it can be used in dozens of city throughout the U.S., and the network is expanding. To look for compatibility for your car and city, check on Amazon's dedicated Key website. Like every other tech invention these days, Key requires a smart device application, which requires a one-time setup. The service is available on the Key app or the FordPass and Lincoln Way apps. While ordering on Amazon, customers will then select in-car delivery during checkout. Input a public delivery address, and park the car within two blocks of that address. While the order is in transit, Amazon will provide status updates, another feature that takes away some of the anxiety of waiting for a package to be delivered. The package will be put into the car within a four-hour window, and users will get notifications that the exchange is complete, and the car is again securely locked. Should customers change their minds, they can always cancel the delivery method, and the car will remain locked. In that case, the delivery could go to the building where the car is parked, or be rescheduled. Ford imagines this as the beginning of numerous car-based services in the near future that can be scheduled while the owner is not there, such as car washes.

Fiat Chrysler picks Google, Samsung for global connected car system

DETROIT — Fiat Chrysler said on Tuesday it will use technology from Alphabet Inc's Google and Samsung to connect all its vehicles by 2022, providing music and video and facilitating future car-sharing and self-driving capabilities. Fiat Chrysler Automobiles NV (FCA) will use Google's Android operating system globally instead of a mixture of software that varies by region, a spokesman said. The automaker will also use a cloud-based digital platform from Samsung Electronics Co Ltd's Harman unit. Unlike its rivals General Motors and Ford, FCA has spent virtually nothing on developing self-driving vehicle technology. This saves the company large amounts of money, but makes it reliant on outside parties to provide technology and systems. FCA said it will launch the new capabilities in the second half of 2019. The company said the system will aid owners "by predicting maintenance needs, locating fuel and charging stations, receiving traffic prompts and restaurant offers and providing live customer-care assistance at the push of the button." Chrysler Dodge Fiat Jeep RAM Technology Emerging Technologies connected car

Lexus NX will be produced in Canada

OTTAWA/MONTREAL — Toyota Motor Corp will build its Lexus NX luxury crossover vehicle at a Canadian plant starting in 2022, the company said on Monday, a decision that Prime Minister Justin Trudeau said demonstrated the value of the country's international trade agreements. The plant will invest hundreds of millions of dollars to produce the Lexus NX and its hybrid version at the factory in Cambridge, Ontario, "supplying the entire North American market," Trudeau said in a presentation with Fred Volf, president of Toyota's Canadian unit. Citing Canada's trade agreements with Mexico, the United States, Europe and Asia, Trudeau said: "We have preferential trade access to two-thirds of the global economy. In fact, we're the only G7 country that has free trade deals with every other G7 country." Trudeau, who faces a tough re-election contest in October, said the plans by Toyota, one of the world's largest carmakers, will help guarantee 8,000 jobs and the factory. The announcement is a "counter narrative" for Canada's automaking industry following recent bad news from other automakers, said Flavio Volpe, president of the Toronto-based Automotive Parts Manufacturers' Association, especially in the province of Ontario. Fiat Chrysler Automobiles NV said in March it would cut a shift at its Windsor assembly plant, leading to 1,500 job losses, and General Motors said last year it would shut its Oshawa factory by the end of 2019. Plans to assemble the NX in Canada "means that Toyota's Canadian manufacturing operations are here to stay," Volf said, adding that the cars are "the most technologically advanced and the most in-demand cars in the Toyota-Lexus global lineup." On Sunday, Trudeau hosted Japanese Prime Minister Shinzo Abe in Ottawa. Both touted the benefits of a Pacific trade deal that U.S. President Donald Trump walked away from. Trudeau said he had discussed the project to build the Lexus NX in Canada with Chief Executive Akio Toyoda on April 1. "When we last chatted just a few weeks ago, we discussed the potential of this new Lexus mandate," Trudeau said.

Smart to discontinue sales in U.S., Canada

UPDATE: A Mercedes-Benz Spokesperson responded to Autoblog with the following statement: "After much careful consideration, smart will discontinue its battery-electric smart EQ fortwo model in the U.S. and Canadian markets at the conclusion of MY2019. A number of factors, including a declining micro-car market in the U.S. and Canada, combined with high homologation costs for a low volume model are central to this decision. "Mercedes-Benz will carry forward its electric strategy in the U.S. and Canada with the arrival of the new EQC in 2020. MBUSA and Mercedes-Benz Canada will continue to provide owners of gasoline powered and electric smart fortwo models with access to service and replacement parts via smart and authorized Mercedes-Benz dealers." The original post follows: Smart, the Daimler brand responsible for those little city cars you see all over the place in European cities, but rarely in American suburbs, has been on an interesting ride in recent years. A couple of years ago, the Smart went electric-only in the U.S. and Canada, where small car sales are waning and EV sales have yet to take off — though it continues to sell internal combustion versions in other markets. Most recently, we heard rumors of a possible demise of the brand before Daimler confirmed that Smart would live on through a joint venture with Geely, and that the next generation will be built in China. Now, as TechCrunch reports, Daimler plans to stop selling the smart brand in the U.S. and Canada after the 2019 model year. Autoblog has reached out to Daimler for confirmation, and will update this story when we hear back. According to TechCrunch, a spokesperson told the outlet, "After much careful consideration, smart will discontinue its battery-electric smart EQ Fortwo model in the U.S. and Canadian markets at the conclusion of MY2019. A number of factors, including a declining micro-car market in the U.S. and Canada, combined with high homologation costs for a low volume model, are central to this decision." The report states that Daimler will continue to support current Smart owners in the U.S. and Canada for both gas and electric markets through their Mercedes-Benz dealerships, which will provide service and parts. According to sales tracking site GoodCarBadCar, sales of the Smart Fortwo in the U.S. have dropped from 6,211 units in 2016 to 1,154 units in 2018. It reports just 231 sales in the first quarter of 2019.

Cadillac plans upgrades to its Super Cruise hands-free system

Not content to let Tesla hog the spotlight with lofty claims about its autonomous driving capabilities, Cadillac plans major upgrades to its Super Cruise automated driving system starting next year, when the technology starts rolling out in more models. "The system that we have today, we continue to upgrade," Brandon Vivian, Cadillac's executive chief engineer, told The Verge. 'We have over-the-air re-flash capability, and you'll continue to see us add features and capabilities to Super Cruise going forward." A fellow top Cadillac engineer told the outlet they would not share specifics but said "We want to innovate" as competitors also make advances in self-driving technology. The news comes as Elon Musk says Tesla will launch a driverless robotaxi service in some U.S. cities next year, with "over a million cars with full self-driving, software, everything." The audacious claim hinges on a new Samsung microchip for self-driving vehicles. Last year, Tesla rolled out Navigate on Autopilot, which allows vehicles to change lanes, take exit ramps and choose the correct highway interchange and exit. At the New York International Auto Show, Cadillac announced that it will equip the forthcoming 2020 CT5 sedan with Super Cruise, though not initially. The brand plans to roll out a new model equipped with Super Cruise every six months starting in 2020 and going through the end of 2021, meaning four new models with the technology in two years. Super Cruise previously has been offered only on the CT6 Platinum, and as an option on other CT6 trim levels, along with a three-year OnStar package. It uses cameras, lidar mapping and radar, plus an infrared camera mounted atop the steering column to make sure the driver isn't nodding off, looking away for too long or climbing into the back seat. There's also an LED light bar on the steering wheel and Super Cruise icon on the instrument panel to let drivers know when the system is ready, not ready and ready to deactivate. But the system can't switch lanes and only works on around 130,000 miles of divided highways that GM has mapped with lidar-equipped vehicles. Vivian said the Super Cruise setup in the CT5 will be largely the same as in the CT6 and likened it to "a half step in between" a full next generation of the technology. GM also plans to eventually roll out Super Cruise to its entire U.S. lineup following its introduction in all Cadillac models. Autoblog named Super Cruise the 2019 Technology of the Year winner.

Jaguar Land Rover planning to allow owners to earn cryptocurrency

Jaguar Land Rover, Britain's largest auto manufacturer, said on Monday it is testing software that will allow drivers of its cars to earn the IOTA cryptocurrency as a reward for sharing data. The company is developing what it calls "smart wallet" technology to be installed in its automobiles. This would reward Jaguar car drivers with IOTA coins for actions such as enabling their vehicles to automatically report useful data, such as traffic congestion or potholes to navigation providers or local authorities. Drivers could also earn rewards if the car participates in a ride-sharing program, Jaguar said. The tokens earned could be used to pay for tolls, parking and charging for electric cars. The overall goal was to "achieve zero emissions, zero accidents, and zero congestion," the company said. Global car companies are exploring blockchain applications, figuring out different ways in which they can leverage the technology to suit their different needs. Blockchain, the system powering cryptocurrencies like bitcoin, is a shared database that is maintained by a network of computers connected to the internet. The British car company is testing the technology at the new Jaguar Land Rover software engineering base in Shannon, Ireland, where engineers have already equipped several vehicles, including the Jaguar F-PACE and Range Rover Velar, with "smart wallet" features, the company said. It does not yet have a timetable for when it will be commercially available, said Jaguar, a subsidiary of Tata Motors. The IOTA token is based on a distributed ledger technology that enables people and machines to transfer money and data without any transaction fees. IOTA trades on digital asset exchanges and was last at 27 U.S. cents per token. "The smart wallet technology ... can be easily adapted into all new vehicles," Dominik Schiener, IOTA co-founder and co-chairman of its board, told Reuters on Friday. "IOTA wants to enable interoperability with all these different players. So there is no Jaguar coin, no BMW coin, but one universal token for this machine economy," he added.

Mitsubishi wants a compact pickup for the U.S. market, but won't rush it

A Mitsubishi dealer told Wards Auto last year that "the most requested model at the brand's U.S. dealer meetings is 'a pickup truck, a pickup truck, a pickup truck.'" This month, Mitsubishi North America's COO told Wards that the carmaker has its eye on getting back to the compact pickup segment in the U.S., but that it will take time. "[We'd] have to have one that's the right fit for Mitsubishi," he said, "for our demographic, and something that's really competitive in the market." That wasn't the case with the last compact pickup the brand sold here, the Raider. A product of the Daimler-Chrysler alliance with Mitsubishi at the time, the Raider was a rebadged Dodge Dakota. The pickup sputtered through four years of meager sales, being pulled from the market in 2009. As part of the Renault-Nissan alliance, Mitsubishi's been put in charge of the group's next midsize body-on-frame platform, Automotive News reports. The chassis will underpin the next-gen Mitsubishi Triton (2019 model pictured), Nissan Navara and Renault Alaskan, and if Daimler continues the tie-up with Renault, the next Mercedes X-Class. It sounds like Mitsubishi has already made room for electrification, the COO telling Wards, "you start mixing in some of that electrification technology and these hybrid drivetrains, the aspect of performance is really going to change in the future." The carmaker does very well with its compact Triton pickup, sold in 150 overseas markets under that name as well as L200 and Strada. Wards says LMC Automotive predicts a Triton will come to the U.S. as a 2025 model, but we can't know how similar our model would be to the international model. Our Nissan Frontier, for instance, is not the same as the Frontier sold overseas, the global truck also known as the Navara and NP300. The five-year wait shows Mitsubishi won't be reckless with any new launch now that it has a vision and momentum to protect. The Japanese carmaker has posted sales gains in the U.S. for six straight years. The last two years surpassed 100,000 units, 2018 delivering a 14 percent jump over 2017 in spite of Mitsubishi having just four models on sale here.

Cadillac CT6 loses the entry-level 2.0-liter turbo four-cylinder

General Motors continues its engine rationalization among product lines. A few days after Chevrolet dropped the old-generation LTG 2.0-liter turbocharged four-cylinder from the Traverse, Cadillac has jettisoned the new-gen LSY 2.0-liter turbo four from the CT6 range. Given a look at the dealer ordering system, Cadillac Society said the 2.0-liter option shows "built out" or "no longer available," and the online configurator at the Cadillac site confirms the omission. The retired engine can be had in the XT4 crossover, rated at the same 237 horsepower and 258 pound-feet of torque. This means a couple of things for the big sedan. The CT6 entry price was $50,495 before destination, but fitted with the now-base 3.6-liter six-cylinder, the entry price has gone up to $55,495. The other change is that rear-wheel drive is no longer available; the three remaining engine choices come with all-wheel drive. Those engines are the NA 3.6-liter V6 with 335 hp and 284 lb-ft of torque, a 3.0-liter twin-turbo V6 with 404 hp and 400 lb-ft, and coming in a few months, the detuned 4.2-liter Blackwing twin-turbo V8 with 500 hp and 574 lb-ft, down from 550 hp and 627 lb-ft. Cadillac Society thinks one of the possibilities for making the move could be that GM is having a hard time meeting demand for the 2.0-liter. That might be, but we think no matter the reason, the result puts more logical pricing between the midsize CTS/CT5 and the full-size luxury flagship. We don't know how Cadillac will price the coming CT5, but there's now an $8,005 difference between the CTS and the CT6, instead of the $4,000 gap when the 2.0-liter was a CT6 option. Mercedes-Benz, for instance, puts a $12,000 gap between the C-Class and the E-Class, a $38,000 gulf between the E-Class and the S-Class. There's a $19,000 difference between an Audi A4 and A6, a $25,000 difference between an A6 and an A8. It isn't clear if this will affect every other market where the CT6 is sold. The Canadian, Mexican, and French Cadillac site configurators don't list the 2.0-liter turbo, but the Chinese Cadillac site does.

Muhammad Ali's 1976 Alfa Romeo Spider Veloce Series II is for sale

An Alfa Romeo was never in the plans. It was by accident that Muhammad Ali ended up bringing home this beautiful silver-on-black 1976 Spider Veloce Series II, but its interesting backstory only makes it more special. It's a story the car's next owner will surely need to memorize, as the car is currently listed on eBay for a Buy It Now price of $39,900 OBO. Found by Silodrome, the car is listed by Moto Exotica out of St. Louis, Missouri. According to Moto Exotica, which sources a clip from the book "Running with the Champ" by Ali's close friend and car guy Tim Shanahan, Ali had set out with Shanahan to buy a new Rolls-Royce (Ali loved his Double-Rs) during his time living in Chicago. The two visited European Imports in Lake Forest, Illinois, with the intention of buying a Kelly Green Corniche and possibly a Mercedes-Benz SL for Ali's wife, Veronica Porche. To Ali's dismay, the dealership did not have any SLs in stock, so this Alfa was suggested as an alternative. Ali purchased the car, brought it home, and ran into yet another issue. Porche did not know how to drive the car's manual transmission, and apparently didn't have any desire to learn. So the car mostly sat, with the exception of some rare errand runs by one of Ali's assistants. After a short time passed, Ali learned that Shanahan's personal car had broken down. In a situation that perhaps suggests destiny, Ali then gifted the car to Shanahan, who has owned the car for 40-plus years up until its sale to Moto Exotica. With about 80,000 miles, it has some wear and tear, such as a small crack on the dashboard, but it's in solid overall shape and recently received a respray. Plus it comes with the real registration with Ali's signature on it. Check out the full photos, video, and descriptive listing at Moto Exotica.

Cadillac CT5 vs. BMW 3 Series | How they compare on paper

Cadillac just introduced the CT5 sedan at the 2019 New York Auto Show, and it's set to replace both the larger CTS and smaller ATS in the brand's lineup. We have all the details and features for you, in addition to a deep dive with the car's chief engineer, but now it's time to see how it stacks up to the long-time standard bearer in this class: the BMW 3 Series. Now, the car is a bit larger than the completely new 2019 3 Series, but Cadillac says the 3 and the rest of the compact luxury sedan class is its target for this car. We'll dive further into this little conundrum later. This comparison will look at how these vehicles measure up on paper, as we haven't driven the CT5 yet. That will come later, but we're expecting it to be a proper sport sedan competitor with the 3 Series, since Cadillac is building it off GM's dynamically superb Alpha platform. Now let's get on with the comparison. Powertrains and performance Both of these sedans come standard with 2.0-liter turbocharged four-cylinder engines. The BMW four-pot is a bit more potent, coming in with 18 more horsepower and 37 pound-feet of torque more than the Cadillac. Here's our driving review of the BMW. The only upgrade engine for both available initially are turbocharged six-cylinders. BMW offers up its revised inline-six, while Cadillac offers a V6. These six-cylinders are both 3.0 liters. Cadillac bests the BMW in brute torque by 31 pound-feet, but BMW takes the horsepower prize, making 47 more ponies. It's hard to say which car will actually be faster to 60 mph — they'll probably end up being about the same once official numbers are out. This segment used to be one guaranteed to offer a manual transmission, but that's not the case anymore. Neither Cadillac nor BMW will offer a manual to start, but expect to see the stick shift return to higher performance models of each car. For now, they both get torque-converter-style automatic transmissions. One dimension that isn't going away from either anytime soon is rear-wheel drive. Both cars offer rear-wheel and all-wheel drive in every spec available. Fuel economy for the 3 Series is impressive at 30 mpg combined with the four-cylinder. We'll have to wait and see if Cadillac can challenge that figure with its less powerful engine. Size and practicality Here's where a lot of the confusion about the Cadillac CT5 sets in. The CT5 is a tad larger than the 3 Series in its exterior dimensions, but the interior specs are nearly identical.

McLaren GT spied in detail running around the streets of Spain

The McLaren GT is on its way, and today we get a more detailed look at the British supercar. McLaren previously released a few photos of the car in camouflage, but these are much more revealing with close-up shots included. We'd like to turn your attention to the middle and rear of the car, where this McLaren stands to differentiate itself most with the rest of the lineup. There's a bit of a stretching effect from the long, gently tapering engine cover and rear deck. It's unclear how much of that area will be usable storage space, but there's bound to be more than the 570 GT allows for now. McLaren has said it's aiming for a full set of golf clubs or two pairs of 6-foot long skis with boots. So for all you McLaren owners upset about not being able to drive your supercar to the golf course or into snowy mountain passes, rest assured that McLaren is remedying this problem. Even though McLaren is calling this a grand tourer, the general supercar shape and supercar characteristics appear ever-present. It's still extremely low to the ground, positions the engine right behind the driver's ears and it'll probably have even more power than the current 570 series of cars. Autocar recently chatted with McLaren CEO Mike Flewitt about the car, and he said it will have a more dedicated focus on the characteristics you want in a GT. That means high levels of comfort from the suspension and also increased cabin luxury. He went on to say that there will be more McLarens like this to come. The DRL, headlight and taillight signatures are clear for us all to stare at now, too. McLaren hasn't showed much restraint when it comes to the air intakes behind the doors, as they're as large as ever. Camouflage on supercars like this McLaren never looks all that bad — we wouldn't be surprised to see somebody do a wrap like this for a rally, as those are generally pretty out-there designs. McLaren is expected to launch the car relatively soon, presumably as a 2020 model year vehicle. It's looking ready to go in these spy photos, so don't expect to wait terribly long to see the new McLaren GT.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

Aston Martin teases the Vantage AMR with a manual gearbox

We are nigh on the debut of Aston Martin's Vantage AMR with a manual gearbox. The English carmaker teased the three-pedal sports car today, Autocar reporting we should see the genuine article sometime in the next week. We still have no idea what kind of transmission this will be — six- or seven-speed, and if a seven-speed, will it employ the motorsports-inspired dogleg setup? What we know is that this is first appearance of the hand-shaker transmission in the lineup since 2017, when Aston Martin made just 14 examples of the V12 Vantage V600. We also know a lot of work went into it. When going public last year with the fact that the manual gearbox would return, Aston Martin explained the height of the challenge involved. The Mercedes-AMG 4.0-liter twin-turbo V8 sitting in the Vantage's engine bay has never been paired with a manual gearbox, so Aston Martin has to create the software and driveline hardware from scratch to make it work. The resulting gearbox will come tuned to make drivers earn their thrills. Chief engineer Matt Becker said, "It reminds you that you have to know how to drive." As a product of the Aston Martin Racing subdivision, and with so much work involved already, the car will surely get other tweaks. The most recent AMR-designated Aston Martins, the DB 11 AMR and Rapide AMR, featured more power, hardcore chassis setups, and a kit of menacing, carbon fiber aero addenda. They also came with substantial price increases, and the Vantage AMR shouldn't disappoint there, either.

Subaru of Indiana produces its 4 millionth Subaru, but that's not all

Subaru of Indiana Automotive (SIA), the only Subaru plant outside Japan, just celebrated building its 4 millionth Subaru. On Monday, April 22, at 10:51 p.m. Eastern Daylight Time, a silver 2019 Outback rolled off the line to mark the milestone. The facility was the product of a joint venture between Subaru and Isuzu, producing about 67,000 cars per year. Devoted solely to Subarus since 2016, yearly output by the more than 5,700 factory associates hovers around 370,000 cars. Those with a head for arcane minutiae might recall that in 2013 Subaru announced having produced the 4 millionth vehicle at the plant. An Outback also celebrated that milestone, that time a 2014 model in Dark Indigo Blue. Subaru answered our question about the previous highlight by explaining, "in the past, the plant produced Isuzu vehicles (and at one point, even the Honda Passport and Toyota Camry)." The 2013 vehicle tally counted everything rolling out the doors. This week's marker counts just the Subarus. The facility also builds the Ascent, Impreza, and Legacy for the North American market. Things are going so well for the Japanese carmaker that we were also told, "While this week we're celebrating our 4 millionth Subaru vehicle (since beginning production in 1989), in early September we expect to produce our 6 millionth overall vehicle." Seems those seven sisters of the Pleiades, Subaru's constellation logo, are shining at full strength.

Renault to propose joint holding company with Nissan, Nikkei reports

TOKYO — Renault SA will propose to Nissan Motor Co a plan to create a joint holding company that would give both firms equal footing as the French automaker seeks further integration with its Japanese partner, the Nikkei newspaper reported on Friday. Under the proposal, both firms would nominate a nearly equal number of directors to the new company in which ordinary shares in both Nissan and Renault would be transferred on a balanced basis, the newspaper said, without citing sources. This would effectively dilute the stake held by the French government in Renault to around 7-8 percent, from its current 15 percent, it added. The new company would be headquartered in a third country, such as Singapore. Renault plans to make the proposal to Nissan soon, the Nikkei said, having modified an earlier merger idea that Nissan rejected on April 12. Nissan declined to comment on the issue. The Financial Times newspaper reported that both Nissan and the Japanese government have refused to engage in merger talks with Renault. The report of the proposal comes as the outlook for the alliance — one of the world's top automaking partnerships — has clouded since the arrest in November of its main architect, Carlos Ghosn, for suspected financial misconduct. It also comes as Nissan's financial performance struggles following years of focusing on volume sales over building its brand, particularly in the United States, its biggest market. Nissan slashes its forecast This week, the Japanese automaker slashed its profit forecast for the year just ended to its lowest in nearly a decade, citing weakness in its U.S. operations. Renault for years has been vying for a closer merger with Nissan, which it rescued from the brink of bankruptcy two decades ago. Ghosn had been working to achieve a deeper integration before his arrest on financial misconduct charges in November last year. While the automakers have been consolidating many of their operations over the past decade, including procurement and production, many executives at Nissan have opposed an all-out merger with Renault. Instead, Nissan has argued for a more equal footing with Renault, which holds a 43 percent stake in its bigger partner. Nissan holds a 15 percent stake in Renault. It was unclear whether Renault would hold the casting vote in major decisions at the new company, as it did in Renault-Nissan B.V., a strategic management company jointly held by both companies that oversaw operations for the partnership.

Hellephant 1,000-horsepower Mopar crate engine priced, is available to order

The folks at Fiat Chrysler's Mopar division unveiled its meanest road-going V8 ever at last year's SEMA show. It makes 1,000 horsepower, and it's called the Hellephant in honor of the second-generation Charger's 426 "Elephant" V8, and because it has a honking big supercharger on top like the modern Hellcat. What we didn't know was the price, but now order books are open, and it's priced at $29,995. That's about $10,000 more than the currently available Hellcat engine, which makes 707 horsepower. You'll also probably want to buy the available kit that comes with all the computers, wiring, sensors and throttle to run it, and that's an extra $2,265. Putting things further into perspective, you can actually buy an entire new Dodge Challenger SXT V6 for $29,340. You'll also still need to add other accessories if you want things like air conditioning, which Mopar is also happy to sell you. What we're saying is, this is a lot of money just for an engine. But on the other hand, this is a roughly plug-and-play engine with Bugatti Veyron power for the price of a V6 Challenger, so that's pretty awesome. And you can put it into anything you have the skills or money to put it in. Plus, it should be able to make more power with higher-octane fuel. We can't wait to see the swaps and builds.

GM faces possible class action lawsuit over 8-speed transmission

General Motors has been hit with a class-action lawsuit from owners who allege the eight-speed automatic transmission found in several rear-wheel-drive Chevrolet, Cadillac and GMC models between the 2015 and 2019 model years has a defect that causes the vehicles to hesitate and jerk when accelerating or slowing down. The lawsuit was posted to ClassAction.org and spotted by GM Authority. Problems with GM's Hydra-Matic 8L90 and 8L45 transmissions have been well-documented on Internet forums and via complaints filed with the National Highway Traffic Safety Administration, with many reporting damage to their vehicles. The lawsuit was first filed in December in U.S. District Court for the Southern District of Florida but appears to have been transferred recently to New York. Autoblog sought comment from Theodore Leopold, the lead attorney for the plaintiffs. "These transmissions have a common defect," the complaint reads. "Drivers attempting to accelerate or decelerate their cars feel a hesitation, followed by a significant shake, shudder, jerk, clunk, or 'hard shift' when the vehicle's automatic transmission changes gears." The problem also occurs when the vehicles accelerate in a single gear, without shifting, the plaintiffs allege. "Drivers have reported that the shift is sometimes so violent, they feel as though they have been hit by another vehicle." The problem is believed to center on the transmission, torque converter or both. The complaint says it causes undue friction, causing hydraulic systems and gears to function improperly and sometimes leaves metal shavings throughout the transmission, leading to costly repairs and replacement of parts or the entire transmission. It says GM has known about the problems since shortly after it introduced the transmissions, and has issued 13 technical service bulletins, none of which have resolved the problem. GM declined to comment on the lawsuit. The plaintiffs say GM should have warned consumers about the issues and covered repairs under each vehicle's three-year/36,000-mile bumper-to-bumper warranty. They're seeking statewide classes in at least six states: California, Florida, Illinois, New York, Oklahoma and Texas.

Mitsubishi Pajero Final Edition marks end of Japanese availability

Thirteen years ago, Mitsubishi discontinued the full-size Montero SUV in the U.S., and now the same thing is happening in its home country of Japan where it's called the Pajero. The company is marking the end of availability there with a Pajero Final Edition. Only 700 examples will be built. There isn't a whole lot that separates the Pajero Final Edition from normal ones. It has serial number badging inside, and special stickers on the outside commemorating the SUV's introduction in 1982. One cool feature is a Citizen watch with Final Edition branding that's only available to buyers of this Pajero. For a little extra, customers can opt for an exterior package that adds a rear spoiler, chrome spare tire cover and mud flaps with aluminum plates that spell out Pajero. It comes standard with either a black or tan leather interior, a sunroof, roof rails, cold-weather package, and under the hood a 3.2-liter diesel I4 coupled to a selectable four-wheel-drive system and five-speed automatic transmission. The price for it is 4,530,600 yen, or $40,602 at current exchange rates. Somewhat amazingly, this final Pajero isn't much different from the Montero that left our shores. The exterior has been lightly refreshed over the years with different lights and bumpers, and a more integrated spare tire cover. But it looks otherwise unchanged. The interior does sport more modern trimmings. The U.S. model also used a 3.8-liter gas-powered V6 rather than a diesel, but it did have a five-speed automatic like the current one. For diehard Montero and Pajero enthusiasts, this is a somewhat sad moment, but the good news is that Mitsubishi will continue to offer the SUV in other markets where fuel isn't as expensive and roads can still be seriously nasty.

Bronco Scout, Ford and Rivian, and next-gen Land Cruiser | Autoblog Podcast #578

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Road Test Editor Reese Counts and Assistant Editor Zac Palmer. First, they dicuss recent news, including the upcoming next-gen Toyota Land Cruiser, Ford's trademarking of "Scout" and "Bronco Scout," and Ford's $500 million investment in EV startup Rivian. After that, they talk about the cars they've been driving, including the Jeep Wrangler, Cadillac XT4 and Buick Regal GS. Last but not least, they help a listener choose a new car in our "Spend My Money" segment. Autoblog Podcast #578 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Toyota promises a next-generation Land Cruiser Ford trademarks "Scout" and "Bronco Scout" Ford invests $500 million in Rivian Cars we're driving: 2019 Jeep Wrangler 2019 Cadillac XT4 2019 Buick Regal GS Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video:

2019 Mazda CX-9 Review and Buying Guide | Fun for the whole family

The 2019 Mazda CX-9 crossover is the biggest vehicle in the Japanese automaker's lineup, and the only one to offer a third row of seating. It has only one powertrain option, but offers a wide variety of other content across various trim levels. Many folks are drawn to Mazdas for their elegant design, affordability and driving dynamics that are sharper than most, and the CX-9 has all of that to a certain degree even if it's the biggest, most family-oriented one. Still, the CX-9 may be big for a Mazda, but it's one of the smallest in its segment in terms of third-row space and cargo capacity, so it may not be for every family. What's new with the Mazda CX-9 for 2019? Though largely unchanged from when this generation debuted for the 2016 model year, the Mazda CX-9 gets a few small changes for 2019, the biggest of which is the addition of Apple CarPlay and Android Auto compatibility, which is optional on its lowest Sport trim and standard on the Touring, Grand Touring, and Signature. The transmission has been retuned for a smoother, quieter driving experience. Thicker floor mats and headliner further help to make the car quieter. Each trim gets a little something new, too. Sport now offers an optional Sport Package, costing $1,290, with heated front seats, a power driver's seat, heated mirrors, lane-keep assist, adaptive cruise control and automatic emergency braking. Moving up to the Touring trim, the only other change is a frameless rear-view mirror. The Grand Touring trim gets a new 7-inch info screen in the instrument panel, along with new power-folding side mirrors and a 360-degree camera system. The top-level Signature trim gets new badges, rosewood interior trim, and accent lighting in the grille and around the shifter. Along with the new features, the CX-9 increases in price. The Sport trim costs a mere $150 more, the Touring and Grand Touring trims go up by $370, While the Signature jumps $1,050 compared to the 2018 model. What are the CX-9's interior and in-car technology like? The interior varies by trim level, but with Mazda making moves to grab customers from some of the luxury brands on its "path to premium," the higher grades do look and feel like a high-quality, comfortable place to spend time. It's a spacious interior with room enough for a third row. There are some rally nice materials in use, depending on the trim level, including Nappa leather and something called Santos Rosewood.