Blog

Forget everything you know about Cadillac V

Cadillac rolled out the CT4-V and CT5-V performance sedans to a rather confused group of journalists last night. What are these cars? Only 355 horsepower in the CTS-V replacement? And just 320 horsepower for the ATS-V successor? Surely, there's something out of place — you can get up to speed with all the details here. Cadillac understood our confusion and explained what was going on rather quickly. The explanation means you have to forget everything you know about what "V" means for a Cadillac, though. Any Cadillac with the singular "V" badge on it previously has denoted the absolute top-tier of performance for that particular model. The CTS-V had the Corvette Z06 engine in it and made 640 horsepower. The ATS-V had a boosted 3.6-liter V6 good for a raucous 464 horsepower. They were equivalent to BMW M, Mercedes-AMG or an Audi RS. We're not talking about the lesser M or AMG models, either. No, the last Cadillac Vs were meant to compete with cars like the C63 or M3, the top-tier of performance in those brands' lineups. This is where you're going to have to start re-learning, because that's no longer the case for a Cadillac with a V badge gracing the rear end. What Cadillac has essentially done is demote what V means, with the intention of offering "something else" above it. With this new strategy, we'd equate a Cadillac V to something like an AMG 43, M340i, or Audi with an S badge on it. Cadillac has even come out with a car similar to this strategy before in the V-Sport. That didn't confuse everybody, though, because the name was different, and the strategy was clear. Now, Cadillac V is just a small stepping stone to these mysterious high performance cars still to come. We asked for any information concerning these future track-ready, fire-breathing monsters, but mum is the word for now. The naming strategy for something above a V is uncharted territory, and it'll also force everyone to learn what the top of the Cadillac lineup is all over again. Cadillac CT5-V View 6 Photos Why confuse folks like this? Cadillac wants to take advantage of the V brand cache in more of its lineup than just two super sedans. Think future vehicles like an XT5-V, XT4-V and others like that. Now that V doesn't mean a Nurburgring-conquering 500+ horsepower luxury muscle car, it makes it far easier for Cadillac to get V badges on everything. Obviously, GM isn't the first to think of this strategy.

Junkyard Gem: 1986 Saab 900 Turbo

The Saab 900 sold well in Colorado, and owners of these cars tend to hang onto them for decades. For those reasons, I still find 900s while making my rounds of the self-service wrecking yards in the Denver region. The turbocharged models tended to fail more quickly than their naturally-aspirated counterparts, though, so the 900 Turbo can be tough to find today. Here's a 1986 that took its final tow-truck ride into a Denver yard a couple of months back. The 900 received a makeover for the 1987 model year, so today's Junkyard Gem comes from the final year of the 900 with the endearingly 1960s face derived from its 99 predecessor. Most of these cars didn't chug along for quite as many miles as their Volvo 240 countrymen, but that may be attributable more to the differences in driving style between Volvo and Saab owners. The word TURBO had magical connotations during the 1980s, and so most turbocharged cars of the era boasted big, obvious badging. Red car interiors were all the rage during the 1980s and 1990s. Try to imagine the vivid bordellitude of this upholstery before it faded beneath the blazing Colorado sun. Was it a runner when it arrived here? We'll never know. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Born from jets, sure, though the original Saab jet was known as "the Flying Barrel" and wasn't especially graceful-looking. Featured Gallery Junked 1986 Saab 900 Turbo View 14 Photos Auto News Saab Automotive History

Lotus Type 130 electric hypercar confirmed for July 16 reveal

Lotus just formally announced that its electric hypercar will be revealed on July 16. It's called the Type 130, and it's confirmed for production at Lotus headquarters in Hethel, Norfolk. The name is derived directly from the production quantity, as Lotus is capping the car at just 130 units. This project is coming together at a rapid pace, as Lotus also says the first customer deliveries will happen in 2020. Meeting time goals for the production of EVs has proven troublesome for some manufacturers, so we'll see if Lotus is able to deliver in the next year and a half. The British sports car company has Chinese backing in the form of Geely now, so the funds to make this car happen appear to be there. Lotus says that it's had several hundred people express interest in buying the Type 130 since its confirmation at the Shanghai Auto Show. Of course, with only 130 slots available to buy the vehicle, we'll see how it all shakes out once Lotus announces what we expect will be an extravagant price tag. Hypercars, and especially electric hypercars, are never cheap. Lotus released a teaser photo that tells us next to nothing, but it is a photo of the car. The teaser video below is a bit more interesting with the "Hand Built in Britain By Lotus" emblem and the electric charge port hidden off to the left. It has an automatically closing door there, which doesn't exactly feel like Lotus' style. If something can be done mechanically to save weight, that's typically the path taken. We won't prejudge the car too harshly, though, as this represents an entirely new take on Lotus vehicles. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Why a Renault-FCA merger could be good news for Nissan, Mitsubishi

TOKYO — Nissan's advanced technologies including platforms and electric powertrains could give it leverage in a merger involving Renault and Fiat Chrysler, thanks to a royalty system it has with the former, two people with knowledge of the matter said. A merged Renault-Fiat Chrysler could face an extra hurdle each time it uses technology developed by Nissan or Mitsubishi Motors, while the two Japanese automakers stand to gain a client in Fiat Chrysler (FCA), one of the people said. Both sources declined to be identified because of the sensitivity of the matter. Nissan's technology, particularly in electrification and emissions reduction, could give it some sway in the $35 billion potential tie-up between Renault and FCA, even as its stake in the newly formed company would be diluted. Currently Renault SA pays less for technology developed by Nissan than the Japanese automaker pays for French technology, a third person said. This has long been a sticking point for Nissan, and an area where Nissan could seek more favorable terms. "Whenever Nissan transfers platform, powertrain or other technology to Renault, there is a margin or royalty which Renault has to pay for use of that tech," one of the people said. "In that sense, FCA, if everything went well, would become another 'client' of ours and that's good. More business for us." A Nissan spokesman declined to comment on its royalty system. The potential Renault-FCA deal has complicated the Japanese automaker's already uneasy alliance with Renault. A further deal with Fiat Chrysler looks likely at least in the near term to weaken Nissan's influence in the 20-year-old partnership. Renault owns a 43.4% stake in Nissan and is its top shareholder. Nissan holds a 15% non-voting stake in Renault and would see that diluted to 7.5% after the FCA deal, albeit with voting rights. The imbalance between the two has long rankled Nissan, which is by far the larger company. Alliance imbalance Renault had previously angled for a merger with Nissan but has been rebuffed by CEO Hiroto Saikawa. Securing benefits from the merger deal will be important for Saikawa, who is grappling with poor financial performance while he struggles to right the company after the ouster of former chairman Carlos Ghosn last year.

Electric Mini tows a Boeing 777 airplane, because why not?

Car manufacturers seem to love hitching up to massive planes. Even Mini is getting onboard with the trend, and it's using a camouflaged version of the electric Mini on its way. Now, we saw the Mini Cooper S E completely uncovered a few days ago in spy photos, so make sure to check those out to see what the car will really look like. If it's the plane pulling you're after, watch the video above. Mini collaborated with Lufthansa on this one. The airliner provided a Boeing 777F freight aircraft for the stunt. That airplane has an unladen weight of approximately 150 tons, or just about 300,000 pounds. Needless to say, it's safely over whatever towing rating Mini is going to give its electric car. This Mini doesn't pull the airplane far, but it's enough to prove the brand's point: Electric equals lots of torque. Like we mentioned before, others have pulled off a similar stunt. A few notable examples include the Toyota Tundra towing the space shuttle for 12 miles, Porsche hauling an Airbus 380 with various Cayennes and then a Tesla Model X pulling a Boeing 787-9 Dreamliner. The Model X is most like Mini's stunt, since it's also an electric vehicle. We'll note that the airplane towed by the Mini is also far lighter than that towed by the Tesla. Still, to have enough torque and traction to move a 300,000-pound airplane is impressive, and if nothing else, it's entertaining to watch. Reports have indicated that the new electric Mini will share the BMW i3's powertrain and battery pack, so that means it may have required only 168 horsepower and 184 pound-feet of torque to pull this off.

2020 Cadillac CT4-V, CT5-V revealed, less powerful than predecessors

Expectations have reached stratospheric heights for the 2020 Cadillac CT4-V and 2020 Cadillac CT5-V, and for good reason: Their ATS-V and CTS-V predecessors were potent sports sedans with gobs of power and handling and braking to match. Now the new sedans have been revealed, and they're not what we expected. They each lose two cylinders compared with the other vehicles, and on paper, they don't look as capable. But we do have hope that these won't be the end-all, be-all performance Cadillacs. First, let's look at the cars. The CT4-V will be the base of the V brand, and it's our first look at the small luxury sedan. It has a roofline and window treatment more like past Cadillacs, eschewing the C-pillar garnish of the CT5. It also naturally gets dark trim and headlights, a unique spoiler and quad tailpipes to distinguish it as a V. Under the hood is a turbocharged 2.7-liter four-cylinder that is based on the engine in the new Chevy Silverado. It makes 320 horsepower and 369 pound-feet of torque, a far cry from the ATS-V's 464 horsepower and 445 pound-feet of torque. Cadillac CT4-V View 12 Photos Power goes through a 10-speed automatic transmission only. Both rear-wheel drive and all-wheel drive are available. It gets a mechanical limited-slip differential whereas the ATS-V had an electronically controlled limited-slip differential a la Camaro ZL1. The brakes have four-piston calipers at each corner versus six-piston front units and four-piston rear units on the ATS-V, and the rotors are smaller. Magnetic Ride Control remains standard on the rear-drive version, but the all-wheel-driver version sticks with conventional shocks. The new CT4-V is about 200 pounds lighter than the ATS-V, though, and it has 50/50 weight distribution. Additionally, both the CT4-V and the CT5-V have Super Cruise available as an option. Moving on to the CT5-V, it looks like a regular CT5 but with dark trim and lights, quad tailpipes and a unique rear diffuser. Instead of the CTS-V's 640-horsepower supercharged V8, the CT5-V uses a twin-turbo 3.0-liter V6 making 355 horsepower and 400 pound-feet of torque. Changes made to the 3.0 for the CT5-V include a new intake system and new exhaust, and it revs higher too. Like the CT4-V, it comes with a 10-speed automatic and either rear-wheel drive or all-wheel drive. It does get the electronically controlled limited-slip differential.

GM invests $24 million to build more crew cab trucks in Fort Wayne

The full-size pickup truck arms race continues unabated here in the United States as Ford, General Motors and Fiat Chrysler battle back and forth for sales supremacy. The Ford F-Series of trucks continues to lead the field in sales (214,611 units sold through the first quarter of 2019), but the race for second place has been a lot more interesting to watch. That's because Ram, long a distant third in truck sales, eked its way past Chevrolet late in 2018 and has managed to hold the position so far in 2019. Don't take this to mean that sales of GM's trucks have been poor across the board. In fact, the automaker reports that sales of its four-door crew cab pickups are up 20 percent in 2019 over the same period a year ago. And that's what makes GM's announcement today so interesting. The automaker is investing $24 million into its assembly plant in Fort Wayne, Indiana to build more Chevy Silverado and GMC Sierra pickup trucks, and the focus will continue to be on crew cab models. "We are building Chevrolet and GMC crew cab pickups at record volume and mix levels to meet customer demand and the $24 million investment will allow us to build even more," said GM chief Mary Barra in a statement. "Crew cab sales have been very strong, and we are expanding customer choice with new models, more cab choices and innovative new powertrains." It's worth noting that, if crew cab sales are up 20% this year, but overall sales are down (over 15% for Silverado and around 2% for GMC), that means it's the cheaper regular cab and double cab models that are lagging. At the same time, sales of the midsize Chevy Colorado have surged 16%. And finally, if you combine sales of the Silverado and Sierra into one bucket, GM still has a comfortable lead over Ram overall. If there's a takeaway here, it's that trucks of all shapes and sizes have been, currently are and will surely remain hot in America, and automakers will continue to invest money into making sure they are able to satiate consumer demand.

Subaru Crosstrek Baja Racer is a glorious blue and gold liveried masterpiece

Subaru just revealed its new Baja racer, and it's the coolest one yet. The Crosstrek Desert Racer is now sporting Subaru's traditional blue and gold livery that we all know and love from the many years it was plastered on Impreza-based rally cars. It's hard not to be nostalgic on this one, and we just had to share it. This Crosstrek, which bears about zero resemblance to an actual Crosstrek, is being run in the grueling Baja 500 off-road race through the Baja California Peninsula. Crawford Performance and Grabowski Brothers Racing are running the show, hoping to improve on their second-place finish from last year. The vehicle has a 2.5-liter naturally aspirated flat-four engine built to produce 300 horsepower. It's great to see Subaru continue to expand the blue and gold livery theme to more motorsports efforts. At the 2019 Detroit Auto Show we got to see the same livery on an STI rally car destined for competition. Now this beast of a Baja racer looks ready to strike fear into the hearts of its opponents just the same. The vehicle itself is rather insect-like in nature with the suspension and lights sticking out everywhere. There's still no word on whether the team will try for the big Baja 1000, or just stick to the 500 for 2019. Regardless, it looks supremely capable, and must be an absolute hoot to drive.

Jaguar ended production of the XJ sedan in July, 2019

It's the end of the line for Jaguar's long-running XJ sedan, at least as we've come to know it today. Jaguar has confirmed to Autoblog that production of the current XJ will end this summer, with a report from Autocar suggesting that July 5 is the official end date. The brand's flagship sedan will get a replacement, and a spokesperson further confirmed to us that Jaguar will "continue the XJ nameplate." What's not entirely clear is when that vehicle will hit the market, or exactly what form it will take. At least we have some good clues. A few months back at the New York Auto Show, Jaguar design chief Ian Callum told us that "the XJ will be replaced" by a "like-size" car. He also hinted that they would be "doing more battery cars at Jaguar," and that the plan wouldn't be "just batteries put in an old car." Connecting the dots, it seems likely that the XJ will be replaced by a large flagship electric sedan. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Just last year, Jaguar celebrated the XJ's 50th anniversary with a special limited-edition model called the XJ50, and punctuated that debut with a lovely roadtrip that started at Jaguar's home in Coventry and concluded at the Paris Motor Show. But before we get too sentimental about what's come before, we ought to remember that the XJ's very name stands for "eXperimental Jaguar." So whatever comes next — likely a swoopy aluminum-intensive sedan chock full of batteries and a couple of powerful electric motors — will fit right in line with the British flagship's original mission statement. Onward and upward, chaps.

2020 Lexus RX350 and RX450h debut with refreshed styling and updated tech

The 2020 Lexus RX350 and 450h made their debuts late last night, refreshing the fourth-gen model that made its debut back in 2015. The luxury crossover gets a number of updates, with the changes mostly focused on styling, tech and safety. The new three-row model carries over, too, with the second row sporting a set of captain's chairs rather than a full bench. The 2020 RX is set to go on sale in the U.S. in late August 2019. The updated model doesn't look all that different than the 2019 model, especially from the profile. That said, the front and rear fascias have both been smoothed out, taking cues from the handsome LC coupe and LS sedan. All the lines look a bit more sleek, with thinner headlights and L-shaped blades in the taillights, again similar to the LC and LS. There's a sharp crease toward the bottom of the RX that carries across the grille, rocker panel and rear bumper. The grille itself gets a new mesh pattern. The interior is mostly unchanged, with changes mostly focused on comfort rather than design. Three-row models now have more adjustment in the back row, and the second row gets the aforementioned captain's chairs. The infotainment system gets a much-needed update. While the frustrating-at-best touchpad interface is still present, the RX now gets a touchscreen, hopefully improving one of our major complaints with the system. The RX also gets Apple CarPlay and Android Auto, something long missing from Toyota and Lexus vehicles. Voice control can be used through Lexus' own system or using Apple Siri or Google Assistant. There's also a new USB port and a phone holder to keep things in place. Underneath the skin, the 2020 RX gets a revised suspension setup and extra chassis stiffness, the latter thanks in part to new welds, high-strength adhesives and stiffer stabilizer bars. The RX has what Lexus calls Active Cornering Assist and a re-tuned stability control system to mitigate understeer mid-corner. The shocks, too, are revised to improve ride comfort and handling. Lexus says the suspension updates should improve steering feel, too. Finally, there's a few updates to the RX's safety systems. The crossover comes with the latest version Lexus Safety System +, a safety suite that includes features like pre-collision warning, adaptive cruise control, lane-keeping assist and traffic-sign recognition. The new headlights have Lexus' BladeScan Type Adaptive Headlight System, or AHS.

FCA-Renault merger faces tall odds delivering on cost-cutting promises

FRANKFURT/DETROIT — Fiat Chrysler Automobiles and Renault promise huge savings from a mega-merger, but such combinations face tall odds because of the industry's long product cycles and problems translating deal blueprints into real world success, industry veterans told Reuters. BMW's 1994 purchase of Rover, and Daimler's 1998 merger with Chrysler both made sense on paper. The companies promised to hike profits by combining vehicle platforms and engine families. Both combinations proved unworkable in reality, and were unwound. Renault and Nissan, which have been in an alliance since 1999 designed to share vehicle components, have only managed to use common vehicle platforms in 35% of Nissan's products despite an original target of 70%, according to Morgan Stanley. FCA and Renault have raised the stakes for themselves by ruling out plant closures. That increases the pressure to achieve more than $5 billion in promised annual savings from pooling procurement and research investments. The two companies have yet to fill in many of the blanks in the merger plan put forward by Fiat Chrysler. Renault's board is expected to act soon to accept the proposal, but that would lead only to a memorandum of understanding to pursue detailed operational and financial plans. A final deal and the legal combination of the two companies could take months to complete if all goes well. Pressure to cut automotive pollution is driving the latest round of consolidation. Automakers are looking at multibillion-dollar bills to develop electric and hybrid cars and cleaner internal combustion engines. Fiat Chrysler and Renault are betting they can design common electric vehicle systems, then sell more of them through their respective brands and dealer networks, cutting the cost per car. Developing all-new electric vehicles can bring more opportunities to share costs from the outset, industry experts said. "With the emergence of connected, autonomous, electric and shared vehicles, carmakers face immediate investments, so new opportunities for sharing costs have emerged," said Elmar Kades, managing director at Alix Partners. However, most electric vehicles lose money. This is a challenge for city car brands in Europe in particular. Both Renault and Fiat rely heavily on this segment for sales.

Strains between France and Italy risk Renault-FCA merger

PARIS/ROME — Fiat Chrysler's proposed $35 billion merger with Renault has cheered investors, won conditional support from Paris and Rome and even earned cautious backing from trade unions. Beneath this veneer, however, the bold attempt to create the world's third-largest carmaker risks becoming rapidly embroiled in the fraught relationship between France's europhile President Emmanuel Macron and Italy's euroskeptic leaders. For while Deputy Prime Minister Matteo Salvini hailed the proposal as a "brilliant operation," Italy's creaking, state-subsidized Fiat factories are likely to bear the brunt of any production-related cost savings. FCA and Renault said this week that more than 5 billion euros ($5.6 billion) of annual savings would come mainly from combining platforms, consolidating powertrain and electrification investments and the benefits of increased scale. Salvini and France's Finance Minister Bruno Le Maire, who called the deal a "good opportunity" to build a European industrial champion able to compete with China and the United States, have both said they want guarantees on local jobs. "It's not every day that I agree with Salvini," said Le Maire, whose government appears to hold the trump cards. When it comes to where any job cuts fall, France will be helped by its existing 15 percent holding in Renault, whose superior efficiency at its five French plants makes it better placed to handle a supply glut, the demise of the petrol engine and the investments needed for electric and autonomous vehicles. "It will take many, many years to find real savings, and ugly political and operational realities can often swamp the potential of such new entities," Bernstein analyst Max Warburton said of the FCA-Renault plan to rival Japan's Toyota and Germany's Volkswagen. Advantage France? As well as Italy's government having to cope with the aftermath of European elections, which coincided with news of the FCA-Renault plans, political leaders in Rome were only informed shortly before the deal was made public, an FCA source said. This contrasted with the way the French government was treated, with Fiat Chrysler Chairman John Elkann, a fluent French speaker, letting it know of his merger proposal to Renault weeks ago, a French government official said.

Kia compact crossover caught completely uncovered, and it's called Seltos

Kia has been teasing a new, global small crossover with some sketches the past couple of weeks. Now we get to see the actual crossover — called the Kia Seltos — completely unveiled well before the actual reveal. It seems to be sized between the Kia Soul and the Kia Sportage. The photos also show that the drawings Kia released were clearly of the production car. Everything looks nearly identical. It also leans on many current design trends such as a black or contrasting-color roof separated by metallic trim, faux metallic skid plates on the bumpers, and a rising window line at the back. The car has more lines and creases than most of Kia's relatively organic designs of late. The headlights and taillights do have lots of nice detailing, though this is probably a high-level model, and those details may be lost on lower trims. We don't get a look at the interior, but if it's as faithful to the teaser images as the exterior, it should look fairly typical for a Kia. It will have a fairly low, horizontal dash with a large screen protruding from the middle. It looks as though a newer widescreen will be available, which we've seen in the Kia Telluride and K900. Considering the size of the Seltos, it would seem plausible for it to share the naturally aspirated 2.0-liter and turbocharged 1.6-liter engines from the Kia Soul and Forte. The naturally aspirated engine makes 147 horsepower and 132 pound-feet of torque, and the turbo engine makes 201 horsepower and 195 pound-feet of torque. As in those other Kias, the 2.0-liter engine would probably get a CVT while the 1.6-liter engine would likely get a dual-clutch transmission. All-wheel drive is also probably on the table, though we'll have to wait to see if it's offered on every trim and powertrain combination. Kia said the reveal will be this summer, so we may be waiting a couple more months for all those details.

Take a peek inside the cockpit of the Ferrari SF90 Stradale

The Ferrari SF90 Stradale has just been revealed, and the most important thing to know is that it's Ferrari's most powerful production car yet with 986 horsepower. The next most important thing to know is that it's a plug-in hybrid with a turbocharged V8. The powertrain features Ferrari's most powerful V8 yet making 769 horsepower and 590 pound-feet of torque on its own. It also has three electric motors with two at the front and one in the back, and combined they can provide up to 217 horsepower. This also means that the SF90 Stradale is all-wheel-drive. Getting power from the internal combustion powertrain to the wheels is an 8-speed dual-clutch transmission that shifts 100 milliseconds faster than the transmission in the 488 Pista, but it also weighs about 22 pounds less than Ferrari's existing 7-speed dual-clutch transmission. This is due in part to not needing a reverse gear, since reverse is handled by the front motors. In total, the SF90 weighs in at 3,461 pounds. And at 155 mph, the aerodynamics add 860 pounds of downforce. When everything is deployed on pavement, it hits 62 mph in just 2.5 seconds. And for Ferraristi, it lapped the Fiorano test track in 1 minute and 19 seconds. Of course being a plug-in hybrid, it does have a full electric range. It's a bit short at 15.5 miles. Then again, this isn't entirely about fuel economy; the electric motors allows for torque vectoring, and provide extra traction on launch and help fill in any throttle lag from the gas engine. Ferrari SF90 Stradale interior View 3 Photos The interior is high-tech, too. The instrument cluster is a huge 16-inch display. The steering wheel now features touch pads for controlling the instrument cluster, too. You won't see Ferrari's traditional manual transmission selector between the seats. Shifting duties are handled by paddles mounted to the steering wheel. It's also worth noting that this is the first Ferrari that features a head-up display. Want one? Deliveries are scheduled to begin in the first quarter of 2020.

Odell Beckham Jr.'s custom Rolls-Royce hood ornament catches the true Spirit of Ecstasy

Odell Beckham Jr. hasn't even played a single game for his new team, yet he's already making a splash in Cleveland. Not for his play, but for his car. Images and video of OBJ's custom Rolls-Royce Cullinan hit the web this week, and it suits his larger-than-life personality perfectly. The Browns orange wrap is a minor piece in a grand package that includes a custom hood ornament that replicates his famous one-handed behind-his-head catch. Sorry, Spirit of Ecstasy. OBJ's career has been too impressive to be defined by a single play, but his 2014 catch against the Dallas Cowboys (seen below) is certainly a top highlight. Widely considered one of the greatest catches in all of NFL history, it has now been immortalized in a hood ornament of all things. But not just any hood ornament. It takes the place of the sacred Rolls-Royce Spirit of Ecstasy on his custom Cleveland-themed Cullinan SUV. And yes, it can still be hidden within the grille. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. NFL players, and athletes in general, have been known to create some of the wildest custom vehicles we've seen, and OBJ's Double-R is no exception. Built by Dreamworks Motorsports in Roxboro, North Carolina, the Cullinan has an orange wrap, dark 26-inch Forgiato wheels with floating RR center caps, gloss black accents, and Suntek Films window tint. That's just the basic stuff. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Cementing his car as a truly unique piece are the sound system and the interior. Dreamworks built a subwoofer box to mimic the iconic Rolls-Royce grille, and the one-off starlight headliner was constructed just for this vehicle with a custom pattern. Plus there's that Spirit of Hubris up front. Whether it's a no from you, dawg, or it's a resounding yes, there's no doubt this thing will get people talking. Inspect the details in the gallery above. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2020 Buick Encore GX revealed as a bigger smaller crossover

The crossover craze has taken root throughout the car industry, but especially at Buick. The company says that 90% of its sales are of the upright utilities. So it's no surprise the brand is adding yet another model to the line-up, the 2020 Buick Encore GX. Despite the name, the Encore GX doesn't appear to share anything with the current Encore, as GM says it uses a new platform. It's also larger than the regular Encore, though it's also smaller than the midsize Envision. One area in which its slightly bigger size benefits the GX is that it has nearly five more cubic feet of cargo space than the current Encore. Other details about the crossover are scant. Buick hasn't even said what engine or transmission will be used. Buick did say the Encore GX will feature automatic emergency braking with pedestrian detection and lane-keep assist as standard features, with the rear-camera mirror as an option. The current Encore will continue to be sold alongside the Encore GX, and it won't be replaced with the version shown at the Shanghai Auto Show. Pricing and availability will be announced later, along with other vehicle details.

New Bentley Flying Spur will be first Bentley with four-wheel steering

We just got a bundle of details about the new Bentley Flying Spur. Among them is, finally, an official reveal date of June 11. Besides that, the Flying Spur features the latest driving technologies from other current Bentleys, as well as a first for the brand. The company revealed that the luxury sedan will be the first Bentley to get four-wheel steering. It will operate similarly to other systems from other brands, in which the rear wheels will turn slightly in the opposite direction of the front wheels at low speed for maneuverability, and at high speed the rear wheels will turn slightly with the front wheels for extra stability. The Flying Spur also picks up features from other current Bentleys. It gets an all-wheel-drive system that now sends all its power to the rear wheels unless the front wheels start to slip. It will also have the Bentley Dynamic Ride suspension that includes anti-roll bars that are constantly adjusted via a 48-volt electrical system. And of course we get a little visual teaser of the car with a video. It seems to confirm the slightly more blunt look predicted by an earlier teaser. Stay tuned for the full reveal in a couple of weeks.

Infiniti will move back to Japan from Hong Kong in 2020

BEIJING – Nissan's premium brand Infiniti is relocating its headquarters back to Japan from Hong Kong, its home since 2012, to create "more operational efficiencies" with its parent company, according to a document seen by Reuters on Wednesday. The move planned for mid-2020, and expected to be publicly announced later on Wednesday, will help the Japanese automaker cut costs amid a slump in its global earnings in the year ended March 31. "The relocation will further integrate (Infiniti) with global design, research and development and manufacturing functions based in Japan," Nissan said in the statement, adding that Infiniti would continue to "operate independently". The move also was "crucial" for Nissan to follow through on its strategy to electrify the Infiniti lineup, the document said, with plans for every premium model launched from 2021 to be either all-electric or "e-Power" hybrid. A Nissan official, speaking on condition of anonymity, said that while there was a "fair amount of platform and other base technology sharing" between Infiniti and the main volume brand Nissan, "there could be more". Nissan's global operating profit plunged 45% in the last fiscal year and would likely drop another 28% to "rock bottom" in the current one, according to company filings earlier this month. Infiniti's move back to Japan will reverse a decision made under ousted leader Carlos Ghosn to dilute the premium brand's Japanese origins in order to foster a more global image. Its Hong Kong headquarters has about 180 employees who were told about the move back to Yokohama earlier on Wednesday, according to the Nissan official. The Hong Kong headquarters and the global image it was intended to promote were seen as critical for Infiniti to make inroads in China, where being Japanese can sometimes be a handicap because of historical animosities. In 2012, Infiniti and other Japanese brands took a battering in the wake of diplomatic spats over disputed islets known as Diaoyu in China and Senkaku in Japan. Since then, Japan's bilateral relationship with China has steadily improved and Japanese automakers including Nissan and Toyota are seeing their businesses expand, even as China's overall auto market has slumped over the past year. (Reporting by Norihiko Shirouzu; Editing by Stephen Coates)

Nissan tells Renault it is 'not opposed' to Fiat Chrysler merger plan

TOKYO – Nissan on Wednesday told Renault it wasn't opposed to its partner's potential $35 billion merger with Fiat Chrysler, the Nikkei newspaper said, as the two met to hash out the future of their alliance amid a deal that could upend the auto industry. The leaders of Nissan Motor Co, France's Renault SA and junior partner Mitsubishi Motors Corp gathered at Nissan's headquarters in Yokohama for a scheduled alliance meeting - one overshadowed by Fiat Chrysler's proposal this week for a merger-of-equals with Renault. The plan, which would create the world's third-largest automaker, raises difficult questions about how Nissan would fit into a radically changed alliance. Renault Chairman Jean-Dominique Senard arrived in Japan on Tuesday to discuss the proposed tie-up with Nissan, 43.4% owned by the French automaker. "We are not opposed," the Nikkei quoted an unnamed Nissan source who had attended the meeting as saying. The person also said "many details need to be worked out" before the Japanese automaker solidifies its position on the issue, the Nikkei reported. In a statement, the alliance members confirmed that they had "an open and transparent discussion" on the proposal. The deal looks designed to tackle the costs of far-reaching technological and regulatory changes, including the drive toward electric vehicles. Nissan, which has rebuffed overtures by Renault for a merger of their own despite their 20-year alliance, was blindsided by the discussions, sources have told Reuters, stoking concerns that a deal with Fiat Chrysler could weaken Nissan's relations with Renault. The tie-up also poses an additional challenge for Nissan CEO Hiroto Saikawa, already grappling with poor financial performance and an uneasy relationship with Renault after Nissan led the ousting last year of long-standing alliance chairman Carlos Ghosn. There have long been tensions between Nissan and Renault over the imbalance of power in their alliance. Nissan, the bigger company, holds a 15% non-voting stake in the French automaker, while Renault owns 43.4% of Nissan. Ahead of Wednesday's meeting, Japanese media quoted Saikawa as telling reporters that he would look at the potential opportunities afforded by a Renault-FCA merger. Credit ratings agency Moody's said it was vital for Nissan to stabilize its partnership with Renault to expand operational synergies and improve margins.

More Ram trucks recalled over tailgate issue

Almost a year ago Fiat Chrysler recalled roughly 1.6 million Ram trucks over an issue with the locking power tailgate. The actuator limiter tab for the power locking mechanism could fracture, which would permit the actuator's lock-rod control to move beyond its limits. That would pull the locking rods open, thereby allowing the tailgate to open at any time. The 2018 recall covered Ram 1500, 2500, and 3500 pickups from the 2015 to 2017 model years, with the five-foot-seven and six-foot-four beds and the power locking tailgate option. Trucks with eight-foot beds, and those with manual-locking tailgates, were excluded. The trucks with eight-foot beds have been added to the recall as of earlier this month, putting 410,351 more trucks in the pool. According to Consumer Reports, Ram redesigned the locking assembly on the other two shorter bed sizes for trucks built after August 2, 2017, which was the end of the 2017 model year. But the eight-foot long-bed trucks didn't get the redesigned part until April 2, 2018 for some reason, making all eight-foot-bed pickups from the 2015 model year to April 1, 2018 part of the recall equation. FCA says it's not aware of any accidents or injuries because of the issue. The company plans to notify owners on June 28. The paperwork filed with the National Highway Traffic Safety Administration doesn't advise owners to stop driving the trucks, but nor does it instruct owners on how to address the problem in the meantime. Sounds like bungee cords might be the go. The fix is estimated to take 30 minutes at the dealer and entails removing the tailgate cover and installing a stop block to prevent the locking actuator's pivot arm from traveling too far. FCA says it will reimburse owners for any other repairs made to address the problem. Meanwhile, owners can contact Fiat Chrysler Automobiles customer service at 800-853-1403, and refer to FCA's number for this recall, V44. The NHTSA campaign number is 19V-347. Last year's recall comes under FCA number U74, and NHTSA campaign number 18V-486. Ram's not alone on this field. The NHTSA continues to investigate the 2017 Ford Super Duty pickups for a similar issue.

How Renault, Fiat Chrysler, and yes, Nissan, could save through sharing

If French automaker Renault green-lights a proposed merger with Fiat Chrysler Automobiles, the companies almost immediately could begin saving money by consolidating components and basic structures on many of their most popular vehicles, an industry analyst said on Tuesday. The synergies could multiply if they invite Japanese automaker Nissan, currently Renault's alliance partner, to join the merger, according to a former Renault and Nissan executive. Renault and Italian-American rival Fiat Chrysler Automobiles are in talks to tackle the costs of far-reaching technological and regulatory changes by creating the world's third-biggest automaker. A Renault-Fiat Chrysler combination "would mean a greater sharing of parts (which) could really boost the profitability of Fiat Chrysler's smaller vehicles," said Sam Fiorani, vice president, AutoForecast Solutions. Building similar models on a common vehicle architecture, Fiorani said, "would give both companies a lot more freedom in manufacturing. They could mix brands and vehicle sizes on the same assembly line, switch vehicles between plants to balance production, and even shift production from one country to another, depending on changes in demand, tariffs or other considerations." Fiorani said Fiat Chrysler could benefit from sharing the French automaker's expertise in electric vehicles and powertrains, where Renault and Nissan have jointly invested more than $5 billion. These are areas in which Fiat Chrysler has little in the way of components or intellectual property. Another sector that is ripe for consolidation is light commercial vehicles, where Renault and Fiat Chrysler could build a variety of vans in several sizes on common platforms that could be assembled and sold in global markets. Ford Motor Co and Volkswagen AG began their alliance discussions a year ago by focusing on potential collaboration in light commercial vehicles. Getting Nissan's blessing Fiorani said Renault's CMF architecture, which was jointly developed with Nissan and underpins many of Renault's passenger cars and crossovers, could be used by Fiat Chrysler on a wide variety of vehicles. As an example, he said the CMF could provide a new single foundation for at least five Jeep models, including the Renegade, Compass and Cherokee, which now are based on four different platforms.

PGA golfer Kevin Na won a '73 Dodge Challenger, gave it to his caddie

PGA Golfer Kevin Na had one of the best Memorial Day weekends on the planet, as he took home more than $1.3 million from winning the Charles Schwab Challenge. But his caddie Kenny Harms' weekend wasn't too far behind. In addition to the monetary purse, Na won a restomodded 1973 Dodge Challenger, which he then immediately gifted to Harms. Plus, as a sponsor of the event, Lexus gave Harms a free one-year lease on a new UX F Sport. In 15 events so far in 2019, 35-year-old Na has three times finished in the top 10, but his victory at the Charles Schwab Challenge at Colonial Country Club in Texas was his first tournament win of the year. Na, who has been a pro since 2001, was awarded a restored '73 Challenger as part of his winnings. His caddie had been ogling the ride all week, and even predicted the car would be his: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. As soon as Na won the tournament, turned to Harms and yelled, "that's your car!" This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. After the event, Na joked that he wasn't sure how Harms convinced him to give the car away. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. According to a PGA.com report, Harms had told Na he wanted the car, which commemorates the year Charles Schwab was founded, when they heard about the prize months before. Coincidentally, Harms first car was a crummy 1973 Chevrolet Camaro. Steve Strope and his Cali-based shop Pure Vision handled the Challenger customization. Aside from the suggestion of blue paint, Schwab let Strope work his magic. He took the car down to the bare metal before building it back up as an impressive restomod. Because Dodge started downgrading power in the '73 Challengers, Strope swapped in a modern 6.4-liter Hemi crate motor that's rated at 485 horsepower. Several other special touches were added, including tartan interior accents that nod to the famous tartan jacket that is awarded to the tournament's winner. The video above details some of the work. Something tells us the Lexus UX might get a little more use but a little less love than the Challenger. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Auto News Dodge Coupe Classics lexus ux PGA

2020 Mini Cooper S E caught completely uncovered at photo shoot

Thanks to one of our spy photographers, the wait to see Mini's latest electric car is now over. The 2020 Mini Cooper S E was caught completely uncovered during an apparent photo shoot, probably for press and marketing materials. The finished car isn't all that different from the regular 2019 Mini Cooper hatchback and convertible, but it does have a few unique features. From the front you'll immediately notice the filled-in grille. It's bisected in the middle by a highlighter yellow stripe that contains a small opening, just like on the concept. It's basically the inverse of a gas-powered Mini's grille. There's also a circular medallion attached to the grille indicating its electric powertrain. The only other exterior changes include the electric logo debossed in the fuel-filler door, which is obviously now a charging port cover, and the wheels, which are smaller versions of the asymmetric pieces seen on the concept. Otherwise the metal body panels, bumpers, lights, windows and everything else on the body is taken directly from the regular Mini hatch. Since Mini is taking official photos of the car, we expect it's pretty much finished and ready for launch very soon. That would be in keeping with Mini's statement that the car would launch this year. The Frankfurt Motor Show this fall would be a possibility for the release, but we wouldn't rule out something even earlier. Details about the powertrain are scarce. We'd love to see similar specs to the 2009 Mini E, which made 204 horsepower and 162 pound-feet of torque, and had a range of around 150 miles. That said, reports indicate the 2020 Mini Cooper S E will borrow the drivetrain from BMW's i3, which would mean 168 hp, 184 lb-ft, and a range of around 114 miles from a 33.8-kWh battery pack. We'll find out for sure soon enough.

2019 Dodge Challenger Review and Buying Guide | Cause we still review awesome cars, too

The Dodge Challenger has now been kicking around without a complete redesign for a decade, yet it actually seems to be getting more popular in its old age. Credit a substantial overhaul a few years ago, constant tinkering, and a yearly roll out of exciting new variants. For the 2019 Dodge Challenger, we welcome the 797-horsepower Hellcat Redeye and R/T Scat Pack Widebody. However, there's an inherent honesty and unique goodness to the Challenger that allows it to still duke it out with the Ford Mustang and Chevy Camaro – despite those age-old rivals' transformation into something more akin to a sports car. The Challenger, by contrast, is 100% muscle car more concerned with straight-line performance than handling precision. It's also much bigger and practical, lending itself better to daily driver duty. That, plus its distinctive style and diverse model lineup, make it easy to see why the Challenger continues to enjoy such massive success. You can certainly count us among its fans. What's new for 2019? We say goodbye to the SRT 392 and Demon, but hello to the 797-horsepower Hellcat Redeye and R/T Scat Pack Widebody. The regular Hellcat gets a 10-hp bump as well as a new "dual snorkel" hood. Further down the Challenger pecking order, you can now get all-wheel drive on the base SXT. What's the interior and in-car technology like? The Challenger's interior certainly isn't as characterful and flamboyant as its exterior would suggest. The Mustang and Camaro are more interesting and distinctive inside. Still, there are some interesting design flourishes that spruce things up, from the base trim's standard houndstooth cloth to the two-tone leather choices available as options. Besides, we're not sure how flamboyant you need the interior to be in a car available in electric orange, blue, green and purple paint colors. Furthermore, what the Challenger interior may lack in visual pizzazz, it makes up for with space (see below) and technology. A 7-inch touchscreen is standard, but all trim levels have an 8.4-inch version available as an option or standard. Both are among the easiest to use in the industry, and we prefer the 8.4-inch unit in particular to what's offered by the Camaro and Mustang. Heck, the Ford doesn't even come standard with a touchscreen, let alone the Apple CarPlay and Android Auto that are included on every Challenger. How big is it? For a performance coupe, the Challenger is enormous.

Entertainment Weekly gets a peek into the 'Ford vs. Ferrari' film

The 20th Century Fox film "Ford v Ferrari" is scheduled to open Nov. 15. The movie tells a story enthusiasts can't get tired of, and that Ford has turned into two profitable automotive revivals: the double-cross that led to the no-expense-spared revenge that spawned the Ford GT40 and four successive victories at Le Mans. Entertainment Weekly spoke to the primary actors in the piece and got shots from the set. Matt Damon plays Carroll Shelby, the man Ford recruited to run the GT40 program after the race car performed poorly in its first year of international racing in 1964. Christian Bale plays Ken Miles, an English version of Shelby who could build and drive winning cars. Miles was so good that when racing one of his "Miles Specials," a Cooper-Porsche he improved and drove for California Porsche dealer Johnny von Neumann, he beat the factory Porsches so often that the Stuttgart automaker took Miles' car away. The movie focuses on the first year of the GT40's winning run, in 1966 after the car had become the GT40 MkII. Bale calls the story a "David vs. Goliath vs. Goliath" battle, because Shelby and Miles had to fight Ford as well as Ferrari. "It's these two friends figuring out how do you deal with these a–holes in suits who know nothing about racing," he said. And even though the cars won the fight on track, the two men didn't always win the fights with their paymasters. The three-way finish Ford staged at the end of the race cheated Miles of victory. Miles had been laps ahead of the second-place GT40 driven by Bruce McLaren at the time, but slowed down to let the car catch up. After the three-abreast finish, race organizers said McLaren's car started the race behind Miles, and by finishing with Miles had covered 60 feet more than Miles during the race. They declared McLaren and Chris Amon the winners. The story of how they got to that point — which director James Mangold called "Butch and Sundance in the world of racing" — promises more twists and turns than the Le Mans circuit, and some open flame; video on YouTube shows Damon-as-Shelby being set on fire in one scene. We admit to a bit of concern when Mangold says, "This is much more of a relationship movie and less a historical document." Yet it sounds like he's done his best to get the racing right, so all won't be lost no matter what. Head over to EW to check out the full story and more photos.

FCA scion John Elkann tries to pull off a Marchionne-sized merger

MILAN, Italy — When John Elkann lost his ally last year with the sudden death of Sergio Marchionne, some questioned whether the softly-spoken scion of the Agnelli clan would be able to emerge from his shadow to ensure Fiat Chrysler's future. But New York-born Elkann, who became Fiat chairman in 2010, acted decisively to fill the vacuum left by the larger-than-life Marchionne and get closer to the big merger deal the legendary executive was unable to deliver. At just 28, Elkann was thrust into the role of Fiat vice chairman after the deaths of his grandfather and great-uncle "because there was really nobody else" to take the wheel. For Elkann, who got his first taste of the car industry as an intern at a factory producing headlights in Birmingham, England, the first 18 months with responsibility for the family-owned carmaker and its long heritage were "terrible." But from that low point, Elkann, 43, is now trying to merge Fiat Chrysler (FCA) with French rival Renault to form the world's third largest carmaker and tackle new challenges facing the industry. Elkann will become chairman of the merged FCA-Renault if the deal goes ahead, ensuring the Agnelli dynasty plays a central role in the next chapter of automotive history. At an event in Milan on Monday, the usually-shy Elkann looked happy and confident. His first big break came with an instrumental role in persuading Marchionne, who was running one of the businesses owned by the Agnelli family, to become chief executive in 2004 and give Fiat "a new start," Elkann said in a "Masters of Scale" podcast last year. Fiat was at the time almost on the brink of collapse. This involved a "very long night ... and many grappas" but proved to be a turning point in the fortunes of the Italian company founded by Elkann's great-great-grandfather Giovanni Agnelli, which built its first car in 1899. In 2005, Elkann backed Marchionne in negotiating the breakup of an alliance Fiat had entered into with General Motors in 2000, receiving $2 billion from GM in return for canceling a deal that could have required GM to buy the remainder of Fiat Auto. Marchionne then used GM's money to fund a turnaround at Fiat, which involved taking the Italian carmaker into a transformation alliance and then full-blown merger with U.S. automaker Chrysler as Elkann agreed to the Agnellis loosening their grip.

FCA-Renault merger talks: France wants job guarantees and Nissan on board

PARIS — France will seek protection of local jobs and other guarantees in exchange for supporting a merger between carmakers Renault and Fiat Chrysler, its finance minister said on Tuesday, underscoring the challenges facing the plan. Renault Chairman Jean-Dominique Senard arrived in Japan to discuss the proposed tie-up with the French company's existing partner Nissan — another potential obstacle to the $35 billion-plus merger of equals. Renault and Italian-American rival Fiat Chrysler Automobiles (FCA) are in talks to tackle the costs of far-reaching technological and regulatory changes by creating the world's third-biggest automaker. Nissan found out about Renault's merger talks with Fiat Chrysler only days before they became public, four sources told Reuters, stoking fears at the Japanese carmaker that a deal could further weaken its position in a 20-year alliance with Renault. A deal between Renault and FCA would create a player ranked behind only Japan's Toyota and Germany's Volkswagen and target 5 billion euros ($5.6 billion) a year in savings. Some analysts, however, say the companies face a challenge to win over powerful stakeholders ranging from the French and Italian governments to trade unions and Nissan. Patrick Pelata, a former Renault chief operating officer, also criticized the deal plan for undervaluing Renault and threatening to overstretch its engineering resources. By valuing Renault at its market price, the all-share offer attributes a negative 6 billion euro value to Renault operations after deduction of its 43.4% stake in Nissan and 3.1% Daimler holding, Pelata told BFM radio. "That's hardly reasonable," he said. "And I think that shareholders, including the French state, are bound to take issue with this sooner or later." Pelata added: "FCA has big problem because they haven't invested for the future — they have no electric vehicle platform and they've done nothing in autonomous cars." French finance minister Bruno Le Maire told RTL radio on Tuesday that the plan was a good opportunity for both Renault and the European car industry, which has been struggling for years with overcapacity and subdued demand. France sets conditions Le Maire also said the French government would seek four guarantees in exchange for backing a deal that would reduce its 15% stake in Renault to 7.5% of the combined entity. "The first: industrial jobs and industrial sites.

Ferrari officially teases hybrid V8 before official reveal

This is Ferrari's official teaser for the V8 hybrid debuting this week, so let the Photoshop and parsing games begin. Among what we'll call the traditional supercar makers — Ferrari, Lamborghini, and McLaren — the Maranello outfit takes the first dive into the hybrid pool, and they're going to make a show of it. The motorcycle rider who ran down the prototype a few weeks ago looks to have been correct about the rectangular taillights. The last time we saw anything other than round taillights on a production Ferrari was on the much-loved Testarossa and the much unloved 348. There's some deliberate obfuscation going on, unsurprisingly. In the teaser, the rear wing stands up extra tall in the middle. The wing on the prototype spotted last week carries across the car from fender to fender; you can trace the line it makes around the rear three-quarter underneath the camouflage. Based on where there's mesh in the camouflage paneling to let air through, our guess is that the wing does more than channel air under its middle as on the F8 Tributo. And we'll wait to see if the twin exhaust outlet truly dominate the backside like bazookas. VIP clientele have apparently been headed to Maranello as of this morning, ready to witness a three-day event for the production sports car that will sit above the 812 Superfast and below whatever succeeds the LaFerrari. Eyes in Italy say there's a large tent at the Fiorano circuit erected just for the cause. Word is that Ferrari will reveal the car online around the same time as VIP showing, with an in-the-sheetmetal showing sometime next month, perhaps at Le Mans. Ferrari hybrid supercar View 9 Photos

Fiat Chrysler and Renault pursue $35-billion merger to combat car industry upheaval

MILAN/PARIS — Fiat Chrysler pitched a finely balanced merger of equals to Renault on Monday to tackle the costs of far-reaching technological and regulatory changes by creating the world's third-biggest automaker. If it goes ahead, the $35 billion-plus tie-up would alter the landscape for rivals including General Motors and Peugeot maker PSA Group, which recently held inconclusive talks with Fiat Chrysler (FCA), and could spur more deals. Renault said it was studying the proposal from Italian-American FCA with interest, and considered it friendly. Shares in both companies jumped more than 10 percent as investors welcomed the prospect of an enlarged business capable of producing more than 8.7 million vehicles a year and aiming for 5 billion euros ($5.6 billion) in annual savings. It would rank third in the global auto industry behind Japan's Toyota and Germany's Volkswagen. But analysts also warned of big complications, including Renault's existing alliance with Nissan, the French state's role as Renault's largest shareholder and potential opposition from politicians and workers to any cutbacks. "The market will be careful with these synergy numbers as much has been promised before and there isn't a single merger of equals that has ever succeeded in autos," Evercore ISI analyst Arndt Ellinghorst said. With these sensitivities in mind, FCA proposed an all-share merger under a listed Dutch holding company. After a 2.5 billion euro dividend for existing FCA shareholders - giving a big upfront boost to the Agnelli family that controls 29% of FCA - investors in each firm would hold half of the new entity. The merged group would be chaired by Agnelli family scion John Elkann, sources familiar with the talks told Reuters, while Renault chairman Jean-Dominique Senard would likely become CEO. Italian Deputy Prime Minister Matteo Salvini said the proposed merger could be good news for Italy if it helped FCA to grow, but it was crucial to preserve jobs. He did not comment on the French government's 15% stake in Renault, but an influential lawmaker from the ruling League party said Rome may seek a stake in the combined group to balance France's holding. A deal could also have profound repercussions for Renault's 20-year-old alliance with Nissan, already weakened by the crisis surrounding the arrest and ouster of former chairman Carlos Ghosn late last year. The Japanese carmaker has yet to comment on FCA's proposal.

2019 Buick Regal GS Review | Because Buicks are allowed to be cool, too

Buick continues to try to convince everyone that its cars are cool, but we still haven't seen much evidence of this working. However, the 2019 Buick Regal GS is exactly the car that can help change people's minds about Buick in 2019. It has big red Brembos sitting inside superbly stylish wheels, bright red GS emblems everywhere, aggressive bodywork and some of the best sport seats in any car today. Buick truly made the GS look the part, and if you can get past the brand's Wal-Mart greeter personality, you're going to like the way it drives, too. The Regal GS is powered by GM's 3.6-liter V6 that makes a healthy 310 horsepower and 282 pound-feet of torque in this application. That gets mated to a nine-speed automatic transmission, which is the only option for the GS this time around. The previous generation Regal GS offered a six-speed manual, but we weren't missing it too badly here. With seemingly every car under the sun going the turbocharged route, it was refreshing to see GM use a big, naturally aspirated V6. Even stranger was that the Regal GS before this one was boosted, so you could say GM went the opposite direction of the industry trend. That previous GS made 270 horsepower and 295 pound-feet of torque from its turbocharged 2.0-liter four cylinder. So, while the V6 beats it by 40 horsepower, the old GS has it by 13 measly pound-feet of torque. Still, we dig the V6, because this car's power delivery is fantastic with a snarly but restrained exhaust note to go with. My largest quibble is taking off from a stop. The GS's throttle response is a little numb from the get-go, but put any revs to it and the car is ready to leap forward at any speed. This immediacy is increased when you put it into "GS" mode, which sharpens up the throttle, quickens shifts, stiffens the suspension, sends more power to the rear wheels and makes the steering heavier. The nine-speed is seamless and unobtrusive in traffic, but offers up surprisingly quick shifts when you're flat-out. Most of the time I end up ignoring the paddle shifters on cars with torque converter automatics, so I wasn't exactly missing them here. You can select the gears via the gear lever's slapstick function if you really want to, but it's hardly more engaging than just letting the car go at it. In GS mode it holds gears long enough and resists shifting out of the power band. During fall-attack on a backroad, it works smart and is on-par with the eight-speed in our Stinger GT long-termer.