Volkswagen: Bus/vanagon Kombi, Transporter, Bay Wi on 2040-cars

Auto blog

Ford Mustang Mach-E fails Sweden's moose test

The infamous moose test has claimed another casualty. This time it's the Ford Mustang Mach-E AWD Long Range, which was tested in an electric four-way alongside the Tesla Model Y, Hyundai Ioniq 5 and Skoda Enyaq iV (an electric utility vehicle closely related to the Volkswagen ID.4 that is sold in the United States). According to the Swedish testers at Teknikens Varld, Ford's electric car not only failed to hit the speed necessary for a passing grade, it didn't perform well at slower speeds, either. To pass the outlet's moose test, a car has to complete a rapid left-right-straight S-shaped pattern marked by cones at a speed of at least 72 km/h (44.7 miles per hour). The test is designed to mimic the type of avoidance maneuver a driver would have to take in order to avoid hitting something that wandered into the road, which in Sweden may be a moose but could just as easily be a deer or some other member of the animal kingdom elsewhere in the world, or possibly a child or car backing into the motorway. Not only is the maneuver very aggressive, it's also performed with weights belted into each seat and more weight added to the cargo area to hit the vehicle's maximum allowable carrying capacity. The Mustang Mach-E only managed to complete the moose test at 68 km/h (42.3 mph), well below the passing-grade threshold. Even at much lower speeds, Teknikens Varld says the Mach-E (which boasts the highest carrying capacity and was therefore loaded with more weight than the rest of the vehicles tested in this quartet) is "too soft in the chassis" and suffers from "too slow steering." Proving that it is indeed possible to pass the test, the Hyundai and Skoda completed the maneuver at the 44.7-mph figure required for a passing grade and the Tesla did it at 46.6 mph, albeit with less weight in the cargo area. It's not clear whether other versions of the Mustang Mach-E would pass the test. It's also unknown if Ford will make any changes to its chassis tuning or electronic stability control software, as some other automakers have done after a poor performance from Teknikens Varld, to improve its performance in the moose test. Related video:

A car writer's year in new vehicles [w/video]

Christmas is only a week away. The New Year is just around the corner. As 2014 draws to a close, I'm not the only one taking stock of the year that's we're almost shut of. Depending on who you are or what you do, the end of the year can bring to mind tax bills, school semesters or scheduling dental appointments. For me, for the last eight or nine years, at least a small part of this transitory time is occupied with recalling the cars I've driven over the preceding 12 months. Since I started writing about and reviewing cars in 2006, I've done an uneven job of tracking every vehicle I've been in, each year. Last year I made a resolution to be better about it, and the result is a spreadsheet with model names, dates, notes and some basic facts and figures. Armed with this basic data and a yen for year-end stories, I figured it would be interesting to parse the figures and quantify my year in cars in a way I'd never done before. The results are, well, they're a little bizarre, honestly. And I think they'll affect how I approach this gig in 2015. {C} My tally for the year is 68 cars, as of this writing. Before the calendar flips to 2015 it'll be as high as 73. Let me give you a tiny bit of background about how automotive journalists typically get cars to test. There are basically two pools of vehicles I drive on a regular basis: media fleet vehicles and those available on "first drive" programs. The latter group is pretty self-explanatory. Journalists are gathered in one location (sometimes local, sometimes far-flung) with a new model(s), there's usually a day of driving, then we report back to you with our impressions. Media fleet vehicles are different. These are distributed to publications and individual journalists far and wide, and the test period goes from a few days to a week or more. Whereas first drives almost always result in a piece of review content, fleet loans only sometimes do. Other times they serve to give context about brands, segments, technology and the like, to editors and writers. So, adding up the loans I've had out of the press fleet and things I've driven at events, my tally for the year is 68 cars, as of this writing. Before the calendar flips to 2015, it'll be as high as 73. At one of the buff books like Car and Driver or Motor Trend, reviewers might rotate through five cars a week, or more. I know that number sounds high, but as best I can tell, it's pretty average for the full-time professionals in this business.

VW confirms three-row Tiguan to be built in Mexico

Volkswagen has been toying with the idea of a three-row crossover for some time – as evidenced by the CrossBlue concept in 2013 and the Magellan concept way back in 2002. But now the German automaker is bringing it to fruition, and it's doing so right in our back yard (or across the fence, anyway). In its latest announcement, VW confirmed recent reports that it will build a new three-row Tiguan at its plant in Puebla, Mexico. It will be made alongside the Golf and Jetta at the company's largest assembly plant outside of Germany, after a billion-dollar expansion program that will encompass nearly a million more square feet of space and employ some 2,000 workers. Once production of the new Tiguan comes on full steam in 2017, the plant will be pumping out 500 of them every day to be delivered in the Americas, but also exported to markets overseas (save for China and Europe). At that point, VW will be producing 90 percent of its products for North America locally. Of course this won't be the first time Volkswagen will be producing a Tiguan. The current model was introduced in 2007 and underwent a facelift in 2011, but includes only two rows of seating and is imported to North America from factories overseas. VOLKSWAGEN DE MEXICO TO PRODUCE THE NEW THREE-ROW TIGUAN IN ITS PUEBLA ASSEMBLY PLANT Mar 9, 2015 - Investment of $1 billion at Puebla plant - US-CEO Michael Horn: Localization key to safeguard our competitive position - Start of production end of 2016 Puebla/Herndon, March 9, 2015 – Volkswagen de Mexico announced today that a three-row version of the Tiguan will be produced at its plant in Puebla, Mexico. The car will be launched to the markets in 2017. The company will invest $1 billion for the expansion and modernization of its production facilities at the Puebla plant, as well as tooling to produce auto parts at suppliers. Volkswagen de Mexico's strategy of technological upgrading, which started with the production of the new Golf on the Modular Transverse Matrix (MQB) platform, goes to the next step with the new Tiguan. "Localization has become key to safeguarding our competitive position on the global market and manufacturing the Tiguan in Mexico will bring production closer to the U.S.-market," said Michael Horn, president and CEO of Volkswagen Group of America. "It is another proof point that Volkswagen is committed to further growth in the U.S. and North American markets.