1963 Convertible, 1641 Air Cooled Vw Motor,single Stage Carburetor. W/ Extra Par on 2040-cars

Auto blog

Volkswagen reveals Beetle GSR, R-Line convertible and two special GTIs

Volkswagen has chosen to really expand its performance-tuned portfolio at this year's Chicago Auto Show, bringing along a couple of new Beetles destined for model year 2014, as well as a pair of freshened GTI packages that you'll be able to buy almost right away.
The first, and splashiest of the Chicago goodies on the VW stand has got to be the 2014 Volkswagen Beetle GSR. Don't lose your temper, Acura Integra geeks; in this case, GSR stands for "Gelb Schwarzer Renner" or "Yellow Black Racer," and harkens back to a sport-tuned classic Beetle from the 1970s. For the 2014 iteration, the GSR gets a 210-horsepower version of VW's 2.0-liter turbo four-cylinder. That engine is enough to push the Beetle to 60 miles per hour in 6.6 seconds, and up to a top speed of 130 mph.
Of course, you'll have long-since noticed the shockingly yellow-and-black livery before you stumble across the Turbo badge on the rear deck. The GSR gets 19-inch alloy wheels, 235-section tires and a tea-tray rear spoiler, but it's the paint and graphics package that will decide if this is your (lemony) cup of tea. Things don't get any subtler inside the car, either, as VW has carried the colorway through to the interior, as well. Only 3,500 Beetle GSRs will be produced, with just more than half of those going to the US - call your dealer today, Wiz Khalifa.

Prop-driven VW Beetle hopes to land in Bonneville [w/video]

Sometimes you meet folks who, when they tell you "Hey, I have an idea," your reflex response is to stop what you're doing and tell yourself, "Get ready...." We imagine Mike Niemans is one of those folks, and the idea in question is putting a tank engine on a Type 1 Volkswagen Beetle. Not just any old tank engine - as if there were such a thing when we're talking about putting them in cars - but a 668-cubic-inch, 220-horsepower radial engine built by Continental in 1941 and procured from an M2 tank.
In the image above Nieman is using the tank clutch hub to get the motor set up, but in one of the images below you can see what really belongs back there is: a two-inch, reverse-pitch prop taken from a wind generator. He says there's enough mojo with the propeller action to get the car rolling down the runway like a jet when he gives it gas - and speaking of gas, the engine's been refitted to run on propane.
After a few safety tweaks Nieman's going to take the matte-black Beetle to Bonneville, "put the prop on, let her go and see what happens!" We can't wait to see the video of that. There are two shakedown videos below to get you ready.

Get ready to Camino-ize your fourth-generation VW Jetta with this kit

Inexpensive, small pickup trucks used to be everywhere in the US, whether they were from Japanese brands like Datsun or Toyota, the truly weird Subaru Brat or even from Europe with the Volkswagen Caddy based on the Golf. These days that market has completely disappeared, but if you're willing to pick up some tools to build your own, there's a company out there bringing the Caddy back as a kit for the Jetta.
Mark Smith knows a thing about building a vehicle at home. He has over two decades in the DIY-car business as a co-founder of Local Motors and the company that became Factory Five Racing. His latest venture is Smyth Performance and already offers a mid-engine, VW-based kit called the G3F. His new product, though, started as a fluke. "I just wanted a shop truck," said Smith to Autoblog. He already had a Ford F-450 but found that he was driving around with the bed empty most of the time. The result was a pickup truck based on the fourth-generation Jetta that he dubbed the Ute.
The kit retails for $3,500 and ships in three, big boxes, and it's designed to be built and painted in a weekend. Buyers get fiberglass exterior panels, a fiberglass rear window surround, sliding rear window, an aluminum reinforced bed with a tubular steel subframe, taillights, a fully functional steel tailgate, and other parts. In the end, you get a vehicle with a six-foot bed and a payload of around 700-750 pounds. The Ute maintains all of the factory suspension, fuel tank and emissions equipment and requires just a few cuts in the body to complete. "We did a modern Caddy," admits Smith.