2016 Ram 2500 Laramie on 2040-cars

Auto blog

2019 Ram Heavy Duty gets new face, 1,000 lb-ft Cummins and the towing crown

We've seen uncovered images before in spy shots, but here are the official images and word on the 2019 Ram Heavy Duty pickups. Ram dropped so much verbiage on new features that we'd need the truck's 7,680-pound max payload rating to haul the press releases, so dig in. We'll start with that max payload rating, and the 35,100-pound tow rating. Gimlet-eyed truck watchers will note the Ram HD's max tow rating is exactly 100 pounds more than that available on a Ford Super Duty, meaning the Auburn Hills clan takes the "best-in-class" mantle for a few months. The other big number: 1,000 pound-feet of torque from the high-output version of the 6.7-liter Cummins inline-six turbodiesel, a 70-lb-ft increase over the 2018 Ram 3500 HD. Completing the specs at the top, that HO motor produces all that torque at 1,800 rpm, and makes 400 horsepower at 2,800 rpm. One step down, the standard-output 6.7-liter Cummins puts out 370 hp and 850 lb-ft. Thanks to developments like a compacted graphite iron block, lighter pistons, hollow camshaft, and new forged connecting rods and bearings, the Cummins engine has lost more than 60 pounds. The entry-level motor is a 6.4-liter Hemi gas-powered V8 with an unchanged 410 hp and 429 lb-ft. 2019 Ram Heavy Duty View 12 Photos The HO Cummins pairs to an Aisin AS69RC six-speed transmission, with upgraded hardware and programming for better shifting and oversight of the gravity-warping torque. The regular Cummins mates to a "significantly upgraded " version of the in-house 68RFE six-speed automatic. The 6.4-liter Hemi works with the well-known TorqueFlite 8HP75 eight-speed automatic, bolstered for heavy duty obligations, the first time the eight-speed makes an appearance in a Ram HD. A column-mounted shifter works the gearsets on the Cummins-equipped rigs, a rotary dial on the center stack controls the shift-by-wire eight-speed. The Cummins motors come with two 220-amp alternators. The Hemi V8 gets a 220-amp and a 160-amp alternator, which Ram says is the "first gas-driven application of its kind in either class." There will be six trims available: Tradesman, Bighorn/Lonestar, Power Wagon, Laramie, Laramie Longhorn, and Limited. The HD trucks don't share any exterior sheetmetal with the light-duty 1500, and each trim is known by different grilles, bumpers and wheels.

Ram pickups to keep it steel through 2020

One of the hottest topics in the industry these days is automakers' expanding use of aluminum, especially for vehicle bodies and platforms. While the lightweight metal has historically been the preserve of premium brands and sports cars, Ford shocked the industry when it announced that its 2015 F-150 would go aluminum-intensive for its new generation. As it turns out, the material change doesn't even mean a big jump in the prices for most of its trims. Possibly in reaction to the big change, General Motors is said to be using the lightweight metal in its next-gen trucks, too. That only leaves Ram as an open question among the domestics, and at least for now, the company is apparently in no hurry to push tin.
According to Reuters speaking with two, unnamed insiders, the Ram 1500 isn't getting an aluminum infusion until sometime after 2020. That's not to say the truck is going to be stagnant for the next half-decade or more, of course. According to Ram's five-year plan, there's a refresh for the 1500 coming in 2015 and much bigger changes on the way in 2017. Those same sources tell Reuters that further revisions aren't expected until at least 2021, which is when the aluminum could be added.
Fiat Chrysler Automobiles CEO Sergio Marchionne hasn't minced words about his thoughts on using the lightweight metal in pickups. "I have better use of aluminum in this house than a pickup truck," he said in May. Having said that, Marchionne was clear that if the material turns out to be revolutionary in the segment, the company would be willing to follow.

Stellantis lays off salaried workers, cites uncertainty in EV transition

DETROIT — Jeep maker Stellantis is laying off about 400 white-collar workers in the U.S. as it deals with the transition from combustion engines to electric vehicles. The company formed in the 2021 merger between PSA Peugeot and Fiat Chrysler said the workers are mainly in engineering, technology and software at the headquarters and technical center in Auburn Hills, Michigan, north of Detroit. Affected workers were notified starting Friday morning. “As the auto industry continues to face unprecedented uncertainties and heightened competitive pressures around the world, Stellantis continues to make the appropriate structural decisions across the enterprise to improve efficiency and optimize our cost structure,” the company said in a prepared statement Friday. The cuts, effective March 31, amount to about 2% of Stellantis' U.S. workforce in engineering, technology and software, the statement said. Workers will get a separation package and transition help, the company said. “While we understand this is difficult news, these actions will better align resources while preserving the critical skills needed to protect our competitive advantage as we remain laser focused on implementing our EV product offensive,” the statement said. CEO Carlos Tavares repeatedly has said that electric vehicles cost 40% more to make than those that run on gasoline, and that the company will have to cut costs to make EVs affordable for the middle class. He has said the company is continually looking for ways to be more efficient. U.S. electric vehicle sales grew 47% last year to a record 1.19 million as EV market share rose from 5.8% in 2022 to 7.6%. But sales growth slowed toward the end of the year. In December, they rose 34%. Stellantis plans to launch 18 new electric vehicles this year, eight of those in North America, increasing its global EV offerings by 60%. But Tavares told reporters during earnings calls last month that “the job is not done” until prices on electric vehicles come down to the level of combustion engines — something that Chinese manufacturers are already able to achieve through lower labor costs. “The Chinese offensive is possibly the biggest risk that companies like Tesla and ourselves are facing right now,Â’Â’ Tavares told reporters. “We have to work very, very hard to make sure that we bring out consumers better offerings than the Chinese.