2016 Ram 1500 Express on 2040-cars

Auto blog

Ram recalling 65k trucks for rear-axle heat treating

A problem with the rear axle has promoted Fiat Chrysler Automobiles to recall a selection of Ram trucks. The campaign affects 2015-16 Ram 1500 series trucks – specifically those manufactured between June 17 and September 28, 2015. All told, that amounts to over 65,760 units across the United States. The issue stems, according to the statements below, from the rear axle shaft. Some of those trucks may have not had those axle shafts properly heat-treated, which could cause them to fracture and separate from the wheel. And that, it should go without saying, could lead to a crash. FCA states that most of the vehicles in question are in dealer hands, but while the manufacturer says it is aware of one accident to have resulted from the issue, no injuries have been reported. The owners of the affected vehicles will be notified to bring their trucks in to their local dealership to have them inspected. If necessary, the dealership with replace the rear axle assembly. This recall follows three prior (but unrelated) ones, also issued for Ram pickups, that between them affected well over a million units. Related Video: RECALL Subject : Incorrectly Heat Treated Rear Axle Shaft Report Receipt Date: OCT 15, 2015 NHTSA Campaign Number: 15V661000 Component(s): POWER TRAIN Potential Number of Units Affected: 65,760 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Ram 1500 trucks manufactured June 17, 2015, to September 28, 2015. The affected vehicles may have been built with rear axles that were incorrectly heat treated. CONSEQUENCE: If the rear axle shaft was not properly heated treated, it may fracture and a wheel separation could occur, increasing the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the vehicles and replace the axle assemblies, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R59. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. ### Statement: Heat-treating October 27, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 65,760 U.S.-market trucks – most of which are in dealer hands – to inspect and replace, as required, their rear axle shafts or rear axles.

3-row Jeep Wrangler, V8 Kaiser ambulance, and more from Mopar for SEMA

SEMA is back this year, and as is tradition, the American Stellantis brands Jeep, Ram, Dodge and Mopar are bringing some truly amazing concepts to the show. The brands have come up with seven vehicles, four from Jeep, two from Ram and one from Dodge. Some of them show off the current Mopar catalog and possible future parts, while others are just really cool customs. Let's check them out. Jeep Wrangler Overlook Jeep Wrangler Overlook concept View 8 Photos We're starting off with perhaps the most interesting of the concepts on display, the Jeep Wrangler Overlook. And you'll notice right off the bat that it's longer than your average Wrangler Unlimited. It's actually a full foot longer. And it doesn't just add cargo space, it adds passenger space. There's a third row of seats in the Overlook. Those seats also necessitated the safari-style custom rear roof. It's 5 inches taller than a regular Wrangler roof to provide headroom for rear occupants. It also made room for the extra windows. Front passengers also get a fancy single-piece roof section with a pop-up glass section, and the interior features black leather and bronze accents. Other body changes include a custom hood, a narrower front bumper for improved approach angle and a widened rear bumper to protect the longer tail. It also gets custom front bumper lights, Jeep Performance Parts (JPP) A-pillar lights and tubular side steps. The Overlook also rides on the Jeep Performance Parts (JPP) 2-inch lift kit with Fox shocks and 20-inch wheels with 37-inch tires. We wouldn't have thought a three-row Wrangler would be something that would reach production, and it's still unlikely. But, this looks really good. And when Land Rover already offers a third row in the Defender, and is working on a stretched version, we're starting to wonder if Jeep should think about an even more stretched Wrangler. Kaiser Jeep M725 Kaiser Jeep M725 concept View 11 Photos Next up is this year's resto-mod from the Stellantis crew. They found an old Kaiser Jeep M725 military ambulance and did a few things to make it a more modern, go-anywhere super tailgater. Under the hood is a 485-horsepower 6.4-liter V8 paired to an old-school TorqueFlight 727 automatic transmission, shifted by a B&M shifter housed in a repurposed ammunition box. It's still four-wheel drive and has the old axles, but they're attached via a coil-spring suspension instead of the original leaf packs.

Stellantis mega-merger gets approval from FCA, PSA shareholders

MILAN — Shareholders of Fiat Chrysler and PSA Peugeot decisively voted Monday to merge the U.S.-Italian and French carmakers to create worldÂ’s 4th-largest auto company. Addressing separate meetings, both PSA Peugeot CEO Carlos Tavares and Fiat Chrysler Chairman John Elkann spoke of the “historic” importance of the vote, which combines legacy car companies that helped write the industrial histories of the United States, France and Italy. Before the merger is finalized, shares in the new company, to be called Stellantis, must the launched. It will be traded in Milan, New York and Paris. The marriage of PSA Peugeot and Fiat Chrysler Automobiles is built on the promise of cost-savings in the capital-hungry industry, but what remains to be seen is if it will be able to preserve jobs and heritage brands in a global market still suffering from the pandemic. The deal will create the worldÂ’s fourth-largest carmaker, with the capacity to produce 8.7 million cars a year, behind Volkswagen, Toyota and Renault-Nissan, and create 5 billion euros in annual synergies.  “We are fully aware of the fact that together we will be stronger than individually,'' PSA CEO Carlos Tavares told a virtual gathering of eligible shareholders. “The two companies are in good health. These two companies have strong positions in their markets.” The new company will put together under one roof French mass-market carmakers Peugeot and Citroen, top-selling Jeep and Italian luxury and sports brands Maserati and Alfa Romeo - pooling companies that have helped define the industry in the United States, France and Italy. While the tie-up is billed as a merger of equals, the power advantage goes to PSA, with Tavares running Stellantis and holding the tie-breaking vote on the 11-seat board. Tavares is set to take full control of the company early this year, possibly by the end of January. Fiat Chrysler chairman John Elkann, heir to the Fiat-founding Agnelli family and Fiat ChryslerÂ’s biggest shareholder, will be the Stellantis chairman. Fiat Chrysler CEO Mike Manley will head North American operations, which is key to Tavares' long-time goal of getting a U.S. foothold for the French carmaker he has run since 2014, and the clear money-maker for Fiat Chrysler. Such a deal was long wanted by Fiat ChryslerÂ’s long-time CEO Sergio Marchionne, who had predicted the necessity of consolidation in the industry. He was unable to find a deal before his sudden death in July 2018.