Find or Sell Used Cars, Trucks, and SUVs in USA

1973 Pontiac Firebird 6.6l on 2040-cars

US $6,000.00
Year:1973 Mileage:0
Location:

Hillsboro, Iowa, United States

Hillsboro, Iowa, United States
Advertising:

 I've had this girl for 11 years and have realized I will never finish her.
she drives great and runs amazing!
I built a Pontiac 400 bored 30 over forged pistons forged h beams Arp main studs full roller rocker(crane gold 1.5)
over sized valves .port and polished heads with a gasket match. high volume oil pump, pioneer product dampner
750cfm carter carb less than 30k on engine

Msd 6al ignition with a Msd timing control.
700r4 tranny with 3.42 limited slip rear end (not sure on miles on tranny) shifts good with lock up torque converter.
replaced since ive owned the radiator, ignition distributer ,has a electric cooling fan ,rear springs all engine driven accessory's except p.s pump exhaust (headers are getting rusty and need replaced)


frame rails and floor are good trunk is bad.
needs restored body is fair interior is fair

windshield has a crack

rest of the glass is good

Im sure im forgetting something's that are wrong with her but have tried to explain the pros and cons of her as best as I can.

im not sure what body or trim style it is so I picked esprit

any questions just contact me through EBay.


Auto Services in Iowa

Yaw`s Auto Salvage ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 919 SE 21st St, Hartford
Phone: (515) 266-2046

Witham Auto Centers ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Body Repairing & Painting
Address: 2728 S Main St, Dike
Phone: (319) 277-8123

Wheelworks ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Performance, Racing & Sports Car Equipment
Address: 3140 Cedar Cross Ct, Sherrill
Phone: (563) 583-9433

Virgil`s Repair Service ★★★★★

Auto Repair & Service, Tractor Repair & Service
Address: 607 N 4th St, West-Branch
Phone: (319) 643-2211

Super Low Price Auto Glass ★★★★★

Automobile Parts & Supplies, Windshield Repair, Automobile Accessories
Address: 4100 Vandalia Rd, Carlisle
Phone: (515) 299-9000

Mill Creek Machining ★★★★★

Auto Repair & Service, Automobile Machine Shop, Machine Shops
Address: 119 N Willow St, Calumet
Phone: (712) 949-3857

Auto blog

Celebrate the summer solstice by building the Pontiac Solstice shooting brake GM never did

Fri, Jun 21 2019

Happy summer solstice, everyone! To celebrate, we have a particularly unusual eBay find connected to the Pontiac Solstice sports car. A seller has leftover inventory of fiberglass hardtops designed to turn the Pontiac Solstice roadster into a shooting brake. The seller says they came from a since-closed Indiana company, and they're clearly inspired by another aftermarket part and even a GM concept that never saw the light of day. We'll start from the beginning: the stillborn Chevy Nomad concept. It was a concept that came out about the same time as the original Solstice concept, and it was clearly based on the same platform, featuring a small two-door body and a long nose. It also had unashamedly retro Nomad wagon design cues and cues from the original Corvette. The car never saw production, but clearly people were interested in having a wagon-like sports car. That brings us to the next bit of history with an aftermarket hardtop developed by German company EDAG. We saw a prototype in person, and the overall shape seemed to fit the car — and the wraparound window design certainly seemed Nomadic. Besides the unique look, the hardtop and its functional hatch made the Solstice roadster's miniscule cargo space far more usable. It doesn't appear many of the tops were sold, though. These tops on eBay look very similar to the EDAG tops, though it's not clear if they're a direct replica or something similar. Being that the parts are leftover inventory, the seller notes that some of the tops may be missing pieces for installation, so only those who are handy with bodywork and fasteners, or who are able to lean on someone who is, need apply. Even with some extra work, if you really want a Solstice shooting brake, this is likely easier and cheaper than commissioning a shop to custom-build a roof for your. If you're interested, check out the link. They're $499.99 apiece, and the seller will also provide a set of seals and gaskets for the top for an extra $125.

The U-2 spy plane needs high-performance cars to help land

Thu, Oct 15 2015

Typically, aircraft deploy their landing gear from three main points. Most military aircraft, for example, deploy two gears at the back and one forward, like a tricycle. Some civilian aircraft flip the layout, with two in front and one in back - tail-draggers. The U-2 Dragon Lady is wildly different than any of these. With a 103-foot wingspan but a body that's just 63-feet long, the layout of the U-2 makes a traditional landing setup infeasible. Instead, the U-2 utilizes a pair of wheels, one up front and one in back. With such a bizarre layout, landings are so tough that since the U-2's earliest flights at Area 51, the US Air Force has used high-performance chase cars to guide the pilot down safely. The landing process isn't over there, though. As this video from Sploid shows, balancing out the aircraft to fit the detachable "pogos" – think training wheels for spy planes – is a comical procedure requiring a number of airman using their full body weight to even out the U-2. This video also recaps some of the great vehicles that have served as chase vehicles for this legendary spy plane. They include Chevrolet El Caminos, and the Fox-body Ford Mustangs so favored by the California Highway Patrol. For the last several years, the USAF has utilized products from General Motors, using fourth-generation Chevy Camaros, before switching over to the Pontiac GTO and most recently, the awesome Pontiac G8. It's fair to say that if you're a gearhead in the Air Force, this is the job you want. Check out the video, embedded up top. News Source: Sploid via YouTubeImage Credit: Sploid Chevrolet Ford GM Pontiac Military Performance Videos

The last Pontiac Fiero sold for $90,000 at auction

Thu, Dec 3 2020

On August 16, 1988 the last Pontiac Fiero, a red GT model, rolled off the assembly line at GM's Pontiac Assembly plant located in Pontiac, Michigan. It wasn't just the final Fiero, but the final car to be built at that site. The car was raffled off to one of 1,400 plant employees that would soon have to find jobs elsewhere. Whoever that employee was, they remained faithful to the Fiero and kept it in mint condition for 32 years. Last month, it was finally time to move on. It crossed the block at GAA Auctions in Greensboro, North Carolina where it sold for an astounding $90,000. According to the auction house, that's a new world record. The price no doubt reflected the car's place in history as the last example of GM's 1980s mid-engined sports car. However, it was also showroom-new, with just 582 miles clocked on its 2.8-liter V6. 1988 models were also fitted with an upgraded, Lotus-esque suspension produced for just that one year. In addition, this car, serial number 226402, came with its original build sheet, photos from the assembly line, and a collection of news articles and books. It still wore its pre-delivery plastic on the interior and was fully loaded with automatic transmission. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The car's custodian for the past 32 years must be pleased. Bidding started at $25,000 but soon rocketed past the $65,000 reserve. You can see the action starting at the 2:50:13 mark in the video above. The Fiero was symbolic of the 1980s and stood out from the standard GM passenger car fare for its mid-engine layout and plastic body panels. In an era when GM often rebadged cars with minimal differences, the Fiero rode on its own unique chassis. It was positioned as one of the defining products for Pontiac, GM's "excitement" brand, but actual performance never quite lived up to its striking looks.  Nevertheless, it garnered a cult following. It's often the basis for (questionable) custom builds mimicking more exotic models like Ferraris and Lamborghinis, thanks to a steel space-frame design that allows body panels to be easily removed. Thankfully, this significant example escaped such a fate and will live on as a reminder of an interesting chapter of automotive history.