2023 Mercedes-benz Gle 350 4matic® Suv on 2040-cars

Auto blog

Mercedes-Benz GLA Concept crossover leaked ahead of Shanghai debut

With just a few days left before the start of the Shanghai Motor Show, images of the Mercedes-Benz GLA Concept compact crossover have emerged online. The little 'ute is based on the small A-Class hatchback, and though it shares an identical wheelbase, is larger in every other dimension.
Looking like a rough-and-tumble five-door hatchback on the tippy toes of its 20-inch wheels, the GLA is most certainly destined for production in a toned down form that will borrow many bits and pieces from other cars based on this platform like the aforementioned A-Class and the CLA-Class sedan. Carscoop reports that the production version of the GLA will be revealed at the Frankfurt Motor Show in September of this year, with sales to the public starting in 2014.
Since it's based on the A-Class, we expect that the production GLA-Class will be powered by your choice of Mercedes' 2.0-liter turbocharged inline four-cylinder engine and a diesel or two, and will offer transmissions that include the company's seven-speed DCT and perhaps a six-speed manual (at least in Europe). If the GLA follows the same path as the two cars before it, expect a GLA45 AMG producing over 300 horsepower, as well. As for what powers the GLA Concept, that just might remain a mystery until the vehicle is officially revealed in China.

Mercedes to roll out C63 AMG late in 2014 with 4.0L V8

The new 2014 Mercedes-Benz C-Class is upon us, launching initially in North America with turbocharged four-cylinder C300 4Matic and six-cylinder C400 4Matic flavors. But that's only the tip of the proverbial iceberg when it comes to the vast array of powertrain configurations that will be offered in the new C-Class in markets around the world. Orders will soon be rolling in for gasoline, hybrid and diesel engines with four, six or eight cylinders, driving the rear wheels or all four, with the seven-speed automatic transmission soon to be replaced by a new nine-speed unit. But what enthusiasts are really looking forward to is the next C63 AMG.
As BMW has done with the M3 (and new M4), Mercedes has gradually ratcheted up the cylinder count in its AMG C-Class, graduating from the 3.6-liter V6 in the original C36 AMG to the 4.3-liter V8 in the C43 AMG, then the 5.5-liter V8 in the C55 AMG before going the distance with the sublime 6.2-liter V8 in the C63 AMG. Like its rivals, Mercedes is expected to use turbochargers as a replacement for displacement in the next model, but unlike its Bavarian rival, it won't be losing any cylinders in the process.
Skipping the 5.5-liter twin-turbo V8 that has gone on to power other AMG models, the next C63 AMG is still expected to introduce a new 4.0-liter twin-turbo V8 producing between 450 and 500 horsepower. It'll also reportedly keep the same seven-speed automatic transmission (instead of switching to the new nine-speed), but the jury's still out on whether it'll come with rear- or all-wheel drive (or offer buyers the choice). The downsized V8 - codenamed M177 - is then expected to find its way into other models, but the C-Class will be the first to get it when it arrives before the end of the new year ahead.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...