Find or Sell Used Cars, Trucks, and SUVs in USA

1994 Mazda Rx-7 Low Miles!!! Manual!!! on 2040-cars

US $13,995.00
Year:1994 Mileage:42700
Location:

El Paso, Texas, United States

El Paso, Texas, United States
Advertising:

Up for sale is my 1994 MAZDA RX-7. It has 42,700 original miles. Has a five speed manual gear shift. Its in very good shape.The interior is very clean. Engine runs and sounds good. Has an HKS HIPOWER exhaust system and apex-i intake system. I purchased this vehicle in january 2013 from its original owner  but now im gonna sell it now cause i recently purchased another car and have no need for this one. It does have an aftermarket front bumper and right front fender due to cosmetic damage but vehicle was inpsected from underneath before i purchased it and it was all cleanand had no further damage. Rear wing has been installed. Trunk of vehicle is  clean. A/C blows ice cold. Everything electrical works perfectly. Front tire were replaced about a 100 miles ago.Rear tires will need to be replaced soon. Winning bidder is responsible for shipping and full payment is required within SEVEN DAYS. A $1,000 deposit is required and end of bidding. Thanks and happy bidding.

Auto Services in Texas

Zepco ★★★★★

Automobile Parts & Supplies, Speedometers, Truck Equipment, Parts & Accessories-Wholesale & Manufacturers
Address: 508 N Central Expy, Murphy
Phone: (972) 690-1052

Z Max Auto ★★★★★

Auto Repair & Service, Used Car Dealers
Address: 1705 W Division St, Arlington
Phone: (817) 460-3555

Young`s Trailer Sales ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Trailer Hitches
Address: 11th, Gruver
Phone: (806) 374-8171

Woodys Auto Repair ★★★★★

Auto Repair & Service
Address: 6106 N Dixie Blvd, Gardendale
Phone: (432) 362-1669

Window Magic ★★★★★

Auto Repair & Service
Address: Hockley
Phone: (281) 362-0640

Wichita Alignment & Brake ★★★★★

Auto Repair & Service, Brake Repair, Wheels-Aligning & Balancing
Address: 1200 31st St, Holliday
Phone: (940) 322-1919

Auto blog

Next Mazdaspeed3 could go naturally aspirated?

Fri, 12 Jul 2013

The new Mazda3 is a stunner, both aesthetically and from a driving perspective. As with all good things, though, there's always room for improvement. That's where the wizards from Mazdaspeed come in. Mazda's in-house tuner has been tweaking and turbocharging the five-door Mazda3 since 2007, with impressive results.
We've shown you renderings of what the third-generation Mazdaspeed3 could look like, and for the most part your response was quite positive. Now, AutoExpress has come out with details of just what might be under that long hood. According to our friends across the pond, the new Mazda3 MPS (that's what the Speed3 is called in Her Majesty's auto industry) will be arriving with a new, high-revving, naturally aspirated engine. Wait, what?
Yes, if the rumors are to be believed, the next Mazdaspeed3 will ditch its turbocharger. According to an anonymous engineer, the new MS3 will arrive in December (this is for the UK market, mind you) with a 200-horsepower, naturally aspirated engine. The 2.0-liter mill is based on the Skyactiv engine in the new 3, and should be capable of a sub-seven-second run to 62 miles per hour.

What a 181-horsepower 2019 Mazda MX-5 Miata means for us, and you

Mon, Apr 9 2018

Last month, we reported on a VIN filing dug up by Road & Track that showed that the 2019 Mazda MX-5 Miata's 2.0-liter Skyactiv-G engine would get a power bump, from 155 to 181 net horsepower. As for how the 2019 Miata would make that extra power, we heard rumors it'd utilize a new cylinder head allowing higher revs, accounting for that extra power. Now we have what appears to be a leaked document from Mazda Canada showing exactly where that extra power comes from. According to the document posted at Miata.net (registration required to see the image), Mazda will alter camshaft lift and valve size on both the intake and exhaust side, fit freer-flowing exhaust, and smooth and enlarge the piping on the air intake side. There are also internal engine modifications: lighter pistons with lower crowns for better swirl in the combustion chamber, lighter connecting rods, and a crankshaft balanced for higher-RPM operation. All those extra revs mean extra vibration and noise, so Mazda will ditch the single-mass flywheel for a "low-inertia" dual-mass flywheel – which will attempt to find a nice balance between DMF damping action and SMF directness. Overall, it's a pretty serious engine revision with some driveline changes that will heavily affect the driving characteristics of a fantastic driver's car. Contributing Editor James Riswick and Senior Editor Alex Kierstein, both well versed in Miatas past and present, are here to analyze what this could mean for the little roadster. James Riswick: I don't know much about them lighter crank combustion rods, but I for one welcome the news of more power to the Miata. The jump from 155 to 181 seems like a very prudent Mazda-like thing to do, accomplishing that task through various aforementioned technical wizardry as opposed to slapping on a turbocharger, exclaiming "yee-hah" and calling it a day. Alex Kierstein: That's true. I'm wary of additional power, but you do make a good point that at least this is the right way to do it. Going all-motor will keep the bright responsiveness of the engine intact. But higher revs might make power delivery peakier. Frankly, I'd be ok with moving the torque and horsepower peaks up a bit in the rev range, making it a bit more work to access the engine's sweet spot. The dual-mass flywheel should also help if low-end torque suffers, so less stalling in traffic. JR: Did wonders in the 911 and 718s.

Production Mazda Vision Coupe concept, GRMN Supra, new BRZ/86 coming

Tue, Sep 3 2019

After writing about what's in store for the next-generation Subaru WRX, Japan's Best Car magazine is back with more spy work on what's ahead for the coming Mazda sedan, fighting-spec GRMN Toyota Supra, and next-generation Subaru BRZ/Toyota 86. All three are supposedly headed for previews at this year's Tokyo Motor Show before rolling out in 2021 and 2022. Mazda showed the Vision Coupe concept at the 2017 Tokyo show, then sneaked a mention of a rear- and all-wheel drive "Large Architecture" and two inline-six engines into a 2019 investor's report. Best Car says that concept's production version will house a 3.0-liter Skyactiv-X SPCCI inline-six with "M-Hybrid" 48-volt assistance. Output figures remain a mystery, but the mag says engineers are aiming for 345 horsepower. The real deal isn't slated for dealers until 2022, bringing what Mazda bills as a "BMW, Audi quality car at the price of Volkswagen." A further treat: Best Car says the Hiroshima automaker is laying out a two-door version on the same platform. Not even a month after 2020 Toyota Supra chief engineer Tetsuya Tada told us, "With a sports car, the promise is to offer more performance with each additional version," this report says the full-fat GRMN Supra will raise the stakes. Expected in the latter stages of 2021, the current 335-hp Supra will get an "output eventually close to 400 ps" (about 394 horsepower) from its BMW-source 3.0-liter straight-six. Along with that will come a lighter, stiffer body, and a sportier suspension tune to manage and make the most of the 60-horse increase. Best Car says the next-generation Toyota 86 / Subaru BRZ will move to a new platform, without specifying whether it would be Toyota's TNGA platform suggested by a report in April — not that there are many other options. Neither the footprint nor the body dimensions are predicted to change, and transmissions will continue to include a six-speed manual and a six-speed automatic. The new platform will hold a new engine, although it won't be the revelation many fans want. The magazine says the Subaru 2.0-liter FA20 will retire, making way for the Subaru 2.4-liter FA24. The FA24 is the same engine in the Subaru Ascent crossover, where it produces 260 hp and 277 lb-ft. There'll be no such fireworks for the sporty twins due in the first half of 2021, output reported to be "improved to 220 ps," or 217 hp — a 12-hp bump over the current figure.