2003 Xl Used 2.3l I4 16v Rwd Pickup Truck on 2040-cars

Auto blog

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.

2022 GMC Hummer EV No. 001 at Barrett-Jackson brings $2.5 million

This year's Barrett-Jackson auction in Scottsdale, Ariz., played host to a bunch of the first examples of hot new cars: VIN No. 001 of the 2022 GMC Hummer EV, 2022 Cadillac CT5-V Blackwing and CT4-V Blackwing, 2021 Ford Bronco, 2021 Ford Mustang Mach 1 and 2021 Ram 1500 TRX. Every single one of them sold for more than six figures, with all the proceeds of nearly $5 million going to charities, but the big winner was absolutely the Hummer with a hammer price of $2.5 million. The Bronco did nicely, too, with a selling price of $1,075,000. You can see the list of the sale prices from highest to lowest of these first examples below. GMC Hummer EV: $2,500,000 Ford Bronco: $1,075,000 Ford Mustang Mach 1: $500,000 Ram 1500 TRX Launch Edition: $410,000 Cadillac CT5-V Blackwing: $265,000 Cadillac CT4-V Blackwing: $165,000 Despite the Hummer going for $2.5 million, it wasn't the most expensive car to cross the block. That honor goes to a 1966 Shelby Cobra 427 Super Snake that was once owned by Carroll Shelby himself. It sold for $5.5 million, the same price it sold for back in 2007. Nearly as pricey as the Hummer was a restored, numbers-matching 1967 Ferrari 275 GTB/4 that went for $2,475,000. Related video:

Ford recalls 650,000 trucks and SUVs for defective wipers

Ford announced earlier this month that it is recalling 652,996 F-Series pickups, Expeditions and Lincoln Navigators produced for the 2020 and 2021 model years to address an issue that may cause their windshield wipers to separate, reducing visibility and leading to potentially hazardous driving conditions.  According to the Blue Oval, one of its suppliers used worn tooling components that resulted in wiper arms being produced with splines that are not tall enough to fully engage the motor pivots they're mounted to, which can cause the connection to strip when the motors are turned on. This could result in the wiper arms not moving at all, or engaging only intermittently.  "Worn wiper arm spline tooling core inserts at the supplier resulted in insufficient spline tooth height, which can cause the arm attachment to strip when used with a certain wiper motors with higher torque," Ford said in its defect report to NHTSA. "Potential symptoms include erratic or slow wipe speed of the driver or passenger wiper arm. An improper functioning wiper arm may potentially result in reduced visibility in certain conditions, which could increase the risk of a crash." Ford says the vehicles were not produced in VIN order, so while not all of the nearly 653,000 vehicles have bad wiper arms, they're all suspect until proven safe. Ford will notify owners of the recall campaign starting in May.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Recalls Ford Lincoln Safety Truck SUV