1992 Ford Mustang Gt Convertible 2-door 5.0l/supercharger on 2040-cars

Auto blog

Ford recalls 90,736 vehicles due to engine valve issue

Ford will recall 90,736 vehicles as engine intake valves in the vehicles may break while driving, the National Highway Traffic Safety Administration (NHTSA) said on Saturday. The recall impacts certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine, the NHTSA said. According to documents posted by NHTSA and sourced from the automaker, "The engine intake valves may break while driving, which can result in engine failure and a loss of drive power." Following an investigation that started in January, 2022, Ford found 22 instances where "the engine intake valves fractured and fell into the combustion chamber of the engine causing catastrophic engine damage." The automaker's analysis continues: "Ford identified that the potential root cause of the failures was engine intake valve failure due to valves that exceeded the designed specification for hardness, were brittle, and more likely to fracture. Ford determined that this was due to the supplier’s grinding processes and the sensitivity of the intake valve material to grinding processes that were not within control specifications. The intake valve material was changed for vehicles produced after October 31, 2021." Fixing the problem will require replacement of the entire engine. "Dealers will inspect each vehicle to determine its cumulative number of engine cycles. For vehicles that do not meet the engine cycle threshold, dealers will accumulate high revolutions per minute (rpm) engine cycles per a service procedure. Engines will be replaced on vehicles that do not pass the engine cycle accumulation," Ford says.

Bodie Stroud seriously updates the 1956 Ford F-100 into the BSI X-100

If you thought pickups could use a lot more love in the resto-mod world, then Bodie Stroud – he of "The Real Thing" Mustang – has something for you: the BSI X-100. His team starts with the body of a 1956 Ford F-100, but the sheetmetal is about all the nostalgia you're going to get; the body, tweaked with a chopped hood and a larger rear window on the cab, sits on a custom steel ladder-frame chassis. Out back is a one-piece, tubbed bed, and behind that are taillights from a 1948 (gasp!) Chevrolet. Under that hood is either a 412-horsepower, 5.0-liter Ford Racing Coyote crate engine, or a supercharged, 6.0-liter, 630-hp Ford Racing Aluminator motor, shifting through a Ford 4R70W four-speed automatic. Inside, the dash is reworked to fit gauges from a Ford F-150 King Ranch Edition, and the bench is swapped out for buckets from a Mustang GT. The independent front and four-link rear suspension are adjustable, helping to make room for staggered wheels - 19 inches in front, 20 inches in back, and larger can be accommodated. Six-piston Wilwood brakes handle the stopping. There's a lot of fabrication and hand-work involved, and it doesn't come cheap: BSI says the turnkey package starts at $180,000. If you've got it, this is an exceptional way to flaunt it. The press release below has all the details. THE BSI 1956 X-100: TIMELESS LINES, MODERN TECH New pickup from Bodie Stroud Industries melds the iconic style of the 1956 F-100 with a cutting-edge chassis and drivetrain to create a hand-built, all-new truck with the performance and reliability of a modern sports car. Sun Valley, Calif. (March, 2015) – In an era when anyone can walk into a dealership with good credit and a yearning to go fast and drive out in a 500+ horsepower sports car, owning and driving something truly unique has become a challenge. With that in mind, the craftsmen at Los Angeles-based Bodie Stroud Industries (BSI) have come up with something truly special – a brand new line of hand-built, turn-key pickups with the looks and sheet metal of an American icon, subtly massaged and fitted to a modern chassis and powered by the latest engine, transmission and electronics from Detroit. The result is the world's first all-new, turn-key 1956 Pickup: the BSI X-100. "When most people think about classic trucks, what comes to mind is usually the 1956 F-100, it's one of the most timeless designs of all time," says BSI founder Bodie Stroud.

Lincoln Nautilus, Ford Edge latest prediction: Production ends in July 2024

In June, Auto Forecast Solutions put out a report compiled by its vice president of global forecasting, Sam Fiorani. One item in the report covered how Fiorani had heard from "multiple sources" that Ford shut down the program to replace the Edge crossover in 2023. Assuming this came to pass, with the Lincoln Nautilus based on the Edge, the inference is that the Nautilus would retire at or around the same time. Ford's response to media queries about the report was either "No comment" or PR-speak deflection. Lincoln's statement on the matter to Motor1, a crafty non-answer, was, "The Nautilus plays and will continue to play an important role in Lincoln’s growing SUV portfolio which includes the Corsair, Aviator and Navigator. Lincoln is investing in growth segments like SUVs and we have no plans to exit the segment." It's possible Lincoln has no plans to leave the segment, but the Nautilus might, according to a fresh, unsourced report in Ford Authority. The site claims the Nautilus will end production at the Oakville Assembly Plant in Ontario, Canada, in July 2024.  Again, we can't know how much, if any of this, is true. But we're zeroing in on a timeline for the potential end of the Edge and Nautilus in the U.S. Those are the only two products Oakville currently builds, and when the Canadian union Unifor asked Ford about the reports in June, Ford couldn't offer union reps anything concrete or reassuring. The Detroit News quoted Unifor chief Jerry Dias as saying of the automaker, "There is no question, they are going through a major evaluation of their portfolio, based on a whole host of things."   We could be seeing one of the earlier theories for Edge's potential demise coming true. Some analysts suspect Ford could be pruning its crossover lineup because it has too many similarly-sized offerings at the moment, the Edge hasn't met its sales targets in Europe, and more compact crossovers are on the way that could bring better street cred if they're associated with the Bronco or Bronco Sport. Unifor and Ford are now in negotiations over a new contract, so it's possible we'll get more clarity in the next month or so about Ford's plans and what will come of Oakville and its roughly 4,000 workers. If Ford walks away from the assembly plant, it will only have two engine plants left in Canada, and no vehicle assembly north of the border for the first time in about a century.