1986 Mustang Gt Saleen Clone on 2040-cars

Auto blog

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

2015 Ford F-150 enters production

Ford has given the F-150 a dramatic makeover for 2015, switching to an aluminum body that helps reduce weight by about 700 pounds. Because the truck is dramatically different, Ford also had to change the way it makes the F-150, so we went inside its sprawling factory in Dearborn, MI, this week to see the Blue Oval's new manufacturing techniques in action.
The company has added 850 jobs at the site and upgraded its stamping and tool and die facilities. The body shop is also modernized, and it has been fitted with 500 new robots that join the structures together. The first 2015 F-150 rolled off the line on Tuesday, and the trucks will begin arriving in dealerships in December. Get a closer look at the F-150's unique assembly process in our video.

Facelifted Ford Focus caught testing in the cold

It's that time in the life of the Ford Focus to get a little work done - a nip-tuck here, some Botox there. Yes, Ford is testing a facelifted version of its global C-segment entry, which first hit markets in Europe and North America in May 2011.
Like the touchup on the Fiesta, expect Ford's gaping grille to make its first appearance on the Focus. Our spy photographers point out that this is likely to be a more comprehensive makeover than previous spy shots suggested, based on the additional camouflage seen here on the front and rear ends of this five-door model. New head and taillights are also likely in order, as are changes to the front and rear fascia.
The interior was also snapped and features a cleaner design with a larger central display. Other than that, it looks like some buttons have been changed, making us think most of the Focus' updates are limited to the exterior.