2003 Ford Exporer Sport Xlt 4x4 Only 93k Mi V-6 Auto Runs Great No Reserve on 2040-cars

Auto blog

Ford and Lincoln recall roundup: Explorer, F-350 Super Duty, Aviator

Ford and Lincoln released information on a flurry of recalls this morning. There are three in total, and they span different models and separate issues. Those models include the 2013-17 Ford Explorer, 2020-21 Lincoln Aviator and 2020-21 Ford F-350 Super Duty. We’ll organize these three in order of most cars recalled. 2013-17 Ford Explorer This recall includes a substantial 774,696 vehicles, of which 676,152 are in North America. Why? Ford says these vehicles “may experience a seized cross-axis ball joint that may cause a fractured rear suspension toe link.” The diminished steering control that would follow could increase the likelihood of a crash, Ford states. Only vehicles that spent time in high corrosion states should be affected, Ford says. That means places that lay salt down, experience cold weather and high humidity. Owners of these vehicles will need to take their car into the dealership, where it will be inspected to determine if it needs work. If so, Ford will replace the cross-axis ball joint/knuckle, then replace the toe links with a newly-designed part. Notifications to owners of these vehicles are scheduled to be sent out the week of August 23.  WeÂ’ll note that Ford is reporting six “allegations of injury” related to this issue. For those who donÂ’t live in the high-corrosion states/their car was never registered in those states, Ford is offering a customer satisfaction program in case you were interested in having the work done anyway. 2020-21 Lincoln Aviator Lincoln is pulling back 40,995 new Aviators due to an improperly secured battery cable wire harness. This recall applies to gasoline-only versions of the Aviator, so Grand Touring PHEV buyers neednÂ’t worry. The wire harness may contact the AC compressor pulley due to it being secured improperly. Ford says that over time, the pulley could rub through the wire harnessÂ’ insulation, resulting in a short circuit and ultimately a fire. However, Ford is not currently aware of any injuries or fires related to this concern as of now. When you bring your car in, the dealer will inspect all the parts to determine what needs to be done. Fixes range from a basic tie strap to keep the harness away from the pulley (if it hasnÂ’t made contact yet), to replacement of the wire harness and AC belt if the contact has caused damage. Owners should expect to be notified the week of July 30 if their Aviator is involved in the recall.

Ford reveals EcoBoost-powered Riley prototype for Daytona 24

It's not the first time Ford has participated in the Daytona Prototype class as an engine supplier, but in revealing this new EcoBoost V6-powered Riley Technologies prototype for the new United SportsCar Championship, Ford is making a statement: "We want to show Ford EcoBoost's capabilities as an engine that provides both performance and fuel economy, on and off the track," says Jamie Allison, director of Ford Racing.
In addition to supplying the 3.5-liter twin-turbocharged V6, Ford had its production designer Garen Nicoghosian give the racecar brand-inspired design cues with support from Ford Racing chief aerodynamicist Bernie Marcus.
The car is scheduled to compete at next year's Rolex 24 at Daytona on January 25-26, but before that, Michael Shank Racing is working with Ford at another goal. Driving his Ford Thunderbird, NASCAR champion Bill Elliott set the track's top speed record at 210.364 miles per hour during a qualifying run for the Daytona 500 - way back in 1987 -- and Ford thinks it's about time for that record to fall. What better time the introduction of this new Ford-powered Daytona Prototype? Michael Shank Racing plans to use the twin-turbo V6-powered racer to beat Elliott's record, and it expects to begin prepping for the top-speed run on October 9. Scroll down for the full press release below on Ford's latest race effort.

Ford cuts production at 5 plants, has big backload of cars including Mustang

DETROIT — Ford said on Tuesday it plans to idle five North American vehicle assembly plants for a total of 10 weeks to reduce inventories of slow-selling models. The plants affected include three assembly plants in the United States and two in Mexico, the company said in a statement. The vehicle models include the Ford Fusion and Lincoln MKZ midsize sedans, the Ford Focus compact car, the Lincoln Continental and Ford Mustang, Ford Fiesta and the Ford Transit van. Ford said the Cuautitlan assembly plant that builds the Fiesta would be idled for three weeks. The Hermosillo, Mexico plant that builds the Fusion and MKZ and the Flat Rock, Michigan, factory that assembles Continentals and Mustangs will be idled for two weeks each. The Michigan Assembly plant that builds the Focus will be idled for one week, and the Kansas City assembly line that builds Transit vans will be down for two weeks. Ford did not give dates for the temporary shutdowns. The factories involved employ more than 15,000 people, according to Ford's website. The company did not say how many of those workers would face temporary layoffs. As of Sept. 1, Ford had 111 days' worth of unsold Mustangs, 87 days' supply of Fusions, and a 103 days' supply of Transit vans, according to Automotive News. Dealers had enough unsold Lincoln Continentals to last 162 days. Automakers aim for 65 to 70 days of inventory of most models. Ford and rival General Motors have wrestled most of this year to rein in high inventories of passenger cars as consumers have shifted to buying pickup trucks and sport utility vehicles. Production cuts slice into revenue, but also could help the automakers avoid deeper price cuts on vehicles they can sell. Reporting by Joe WhiteRelated Video: Image Credit: Reuters Plants/Manufacturing Ford Lincoln Convertible Coupe Minivan/Van Sedan ford transit inventory flat rock kansas city assembly plant hermosillo