2014 Ford Escape 2.0 Ecoboost Titanium/turbocharged/navi/camera/heated Leather on 2040-cars

Auto blog

Ford issues recalls for Fiesta, Fusion, E-Series, and Lincoln MKZ

Ford has issued two new safety recalls for North America. The first covers certain 2014-15 Ford Fiestas, 2014-16 Ford Fusions, and 2014-16 Lincoln MKZs with doors that might not close properly. The second pertains to 2021 Ford E-Series stripped chassis and cutaway vehicles with a wiring harness that might chaffe and expose important wiring.    Ford is recalling 268,343 Fiesta hatchbacks, Fusion sedans, and MKZ sedans across the United States, Canada, and Mexico, with 248,912 of the affected vehicles located in the U.S. The recall says the "latch pawl spring-tab design" could crack in locations where the temperature gets too hot. If the tab breaks, the door might not shut. Or, worse, the door will shut temporarily and reopen once the vehicle is in motion. As a fix, Ford dealers will remove and replace the side door latches. In a separate recall, Ford is targeting 3,631 2021 E-Series stripped chassis and cutaway vehicles. These vehicles could have frame-mounted wiring harnesses that could deteriorate and break due to rubbing on the frame. If the chaffing wears down the harness, wiring for the fuel, trailer tow, and antilock braking systems could be exposed and damaged. In the worst-case scenario, the damage to the fuel pump wiring could cause the pump to stop working, which could stall the vehicle.  Those with affected E-Series vehicles should bring them in to dealerships for inspection. If there is no damage, technicians will add anti-abrasion tape over the area and "ensure clearance to surrounding components." If the harness is damaged, the wiring will be spliced and fixed, then anti-abrasion tape will be added. Ford also issued a third recall, but it is specifically for the Canadian market. On 54,292 examples of 2006-10 Ford Fusions, 2006-10 Mercury Milans, and 2006-10 Lincoln MKZs, a valve inside the hydraulic control unit might stick open. According to Ford, this could result in a longer brake pedal travel, which could possibly create dangerous situations if the driver is unaware. Dealerships will inspect the control units and replace those that are defective. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2021 Ford Bronco and Bronco Sport Leaks!!

Is this the 2017 Ford F-250 and its all-new aluminum body?

We don't have much to go on, but our friends at Jalopnik have uncovered a completely undoctored photo (used with permission) of what appears to be the 2017 Ford F-250 Super Duty. There's no indication of what's under the boxy new sheetmetal – our bet, like that of Jalopnik, is that the 6.2-liter gasoline-powered V8 will join the latest torque-monster of a 6.7-liter PowerStroke V8 – but we're still left with lots of time to work out the details. For now, we see the same kind of upright and in-your-face styling that we've come to expect from the Ford Super Duty, including more chrome than a '60s Cadillac up front and huge headlight clusters that cut deeply into the side bodywork. We also note plenty of glass making up the large greenhouse, which should be a boon for visibility. Of course, the big news is the actual metal that the body is stamped from. We're expecting to see lots of aluminum, with the heavy-duty pickup following the smaller, lighter-duty F-150 into the lightweight realm for increased fuel savings and greater pulling and hauling capabilities. Stay tuned for more. Related Video: News Source: JalopnikImage Credit: Jalopnik Ford Truck Future Vehicles Off-Road Vehicles ford f-250 autoblog black

The 1965 Ford Mustang could have looked a lot different

The 1965 Ford Mustang is unquestionably an automotive design icon, and nearly every generation of Mustang has some connection to that original car. Because it's such a universally-known vehicle, we were amazed to see all the different designs that were being considered. Head of Ford's archives Ted Ryan recently shared photos of design proposals for the original Mustang on Twitter that he and Jamie Myler found, and we reached out to them to find out more. As Ryan initially noted, the photos were taken on August 19, 1962, and they are proposals for the Ford Mustang. Apparently Ford had committed to doing a Falcon-based youth-oriented car at this point, and it did have plans to launch the car in 1964 for the 1965 model year. But after having little success with early design proposals, the company asked all of its design studios — the Advanced Studio, Lincoln-Mercury Studio and Ford Studio — to submit proposals. With only about two years before the planned launch, Ford was understandably short on time, and it's believed that the studios only had a month to create and present these designs. Lincoln-Mercury design proposal View 8 Photos The majority of the designs, a total of five, came from the Advanced Studio, and part of this was because they already had a couple of concept designs in reserve it could present. Two other models representing three design possibilities came from Lincoln-Mercury, and just one model with two options came from Ford. The Advanced Studio proposals are shown in the gallery at the very top of this article, and the Lincoln-Mercury and Ford proposals are in the gallery directly above this paragraph. The Advanced Studio's most radical design is the one that was clearly related to the Mustang I concept that would be shown later that year with huge wraparound rear glass, turbine-inspired bumpers and enormous side scoops. The other proposals from the studio were more conservative, featuring simple lines, grilles reminiscent of the Falcon, and one even borrowing the jet-thruster-style taillights made famous on the Thunderbird. Lincoln-Mercury had some impressively bold designs, particularly its fastback that had buttresses to extend the shape all the way to the tail. This car had two different side trim possibilities. The other Lincoln-Mercury design was toned down a bit, but had two interesting possibilities for side detailing, as well as some crisp, low-profile tail fins.