1987 Chevy S10 Pickup on 2040-cars
Richfield, Pennsylvania, United States
|
We are selling a 1987 Chevy s10
4 cylinder 4 speed 143,000 miles Tires are in excellent condition Inspected until September 2014 Uses no oil Runs GREAT!! It has a few flaws they are the check engine light is always on-Don't know why it has been on as long as I have had it and everything works fine It has a manual oil pressure gauge-it has excellent oil pressure Motor has no noises at all it is very quiet for a 2.2 It has a crack in the windshield that will have to be replaced for next inspection This is a GREAT everyday driver that will get you where you need to go IT IS A VERY DEPENDABLE TRUCK!! With a reserve that is priced to sell |
Chevrolet S-10 for Sale
Auto Services in Pennsylvania
Valley Tire Co Inc ★★★★★
Trinity Automotive ★★★★★
Total Lube Center Plus ★★★★★
Tim Howard Auto Repair ★★★★★
Terry`s Auto Glass ★★★★★
Spina & Adams Collision Svc ★★★★★
Auto blog
Want a V8 on the cheap? Buy a work truck
Thu, Aug 3 2017In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.
Experimental mid-engine XP-819 Corvette going up for auction
Sun, 17 Feb 2013It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.
GM already raising prices on 2014 Silverado and Sierra pickups
Mon, 14 Oct 2013General Motors must be pretty pleased with sales of its two newest pickups, the GMC Sierra and Chevrolet Silverado, as it's announced price hikes for both models, as part of a planned price tweak.
Prices will be bumped by as much as $1,500, although weirdly, they'll be offset by as much as $1,500 in cash-back offers through the end of October. Fox Business reports that GM spokesman Jim Cain said of the price hike, "With the sell down of the '13 models nearly complete, this price adjustment was planned and is a normal part of business."
The move, as Fox is quick to point out, is an interesting one, as sales of the twin pickups struggled last month relative to the Ford F-Series, while both of GM's crosstown competitors have been aggressively undercutting Silverado and Sierra prices. The F-150 starts at $24,070 and the Ram 1500 comes in at $23,600, not counting any cash on the hood. A base Silverado, meanwhile, retails at $25,575.






2003 chevrolet s10 4x4 work truck
2000 s-10 ext cab 4x4
Ls 4.3l cd 4x4 tow hooks tires - front all-season tires - rear all-season abs
2002 used 2.2l i4 8v automatic
2002 chevrolet s-10
1995 s-10 406sbc single cab shortbed