1975 Chevrolet Nova Concours Base Sedan 4-door 4.1l on 2040-cars

Auto blog

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

Callaway, Lingenfelter boost Corvette Z06 way beyond 700 hp

With 650 horsepower and just as much torque on tap, few would accuse the latest Corvette Z06 of being down on power. But for those who'll always demand more, two leading Corvette tuners have just announced new tuning packages for the Z06 to boost Chevy's flagship well beyond 700 horsepower. The more powerful of the two comes from Callaway Cars, which has added a larger supercharger, a triple-action intercooler, and more to increase output to a massive 757 horsepower and 777 pound-feet of torque. The result, according to Callaway, is a 0-60 time quoted at 2.8 seconds and a quarter-mile run in 10.5. The package also includes a reshaped hood, all manner of trim upgrades, and a three-year warranty, and will set you back nearly $17k on top of the cost of donor vehicle that currently lists for $79,000. In what could only come second relative to Callaway's kit, Lingenfelter Performance Engineering has also released a Stage 1 package for the Z06. The kit includes a new dry sump damper, upgraded supercharger pulley and drive belt, and more – all of which Lingenfelter says will boost the Vette's output up to 720 hp and 730 lb-ft. Revised performance figures weren't released, but despite the 37-horse, 47 lb-ft deficit, we doubt it'd trail Callaway's by much. But both would likely leave the stock Z06 in their dust, and you can read more about them in the press releases below. Related Video: Callaway Cars Releases Their Most Powerful Corvette - 757 bhp / 777 lb-ft - Z06-based Corvette upgrade boasts 32% larger supercharger, triple intercoolers, and consistent power - lap after lap The Numbers - Callaway Cars today announced power numbers and performance for the flagship model in their performance car lineup. Equipped with Callaway's GenThree Supercharger, the Corvette Z06 now produces 757 bhp @ 6,200 rpm and 777 lb-ft @ 4,500 rpm (SAE). A launch to 60 mph is now achieved in 2.8 seconds, and a quarter-mile in 10.5 seconds at 131 mph. Why Go Big, When You Can Go Bigger? - Size Matters. To reach that power (which is up from 650 bhp / 650 lb-ft) the supercharger itself needed to be bigger since the output of a positive displacement supercharger is proportionate to its size. The Callaway GenThree supercharger is 32% larger in displacement (2300cc vs 1740cc). Cooling - Callaway engineers recognize that a key contributor to maximizing power is reduction of inlet air temperature associated with forced induction.

2014 Chevy Cruze Diesel destined for Chicago debut

It's been a little over a year and a half since General Motors first confirmed plans to offer a diesel-powered Chevrolet Cruze here in the United States, and we've now learned that the oil-burning compact will debut under the lights of the Chicago Auto Show in February. According to GM Authority, the Cruze Eco-D will be introduced as part of the entire 2014 model year Cruze range, set to go on sale in the second quarter of this year.
Earlier reports have indicated that the diesel Cruze will be able to achieve fuel economy numbers in the range of 50 miles per gallon. For comparison, the similarly sized Volkswagen Jetta TDI is rated at 30/42 mpg city/highway, but as we found out in our long-term test of the 2011 model, hitting 50 mpg was a piece of cake.
Official specifications will be released at the time of the 2014 Cruze's unveiling, though reports have stated that the sedan will be powered by a reworked version of the 2.0-liter turbo-diesel inline-four found in the Holden Cruze CDX overseas. In that application, the four-pot oil-burner produces 160 horsepower and 265 pound-feet of torque - increases of 20 hp and 29 lb-ft over the 2.0-liter engine used in VW's Jetta TDI.