Chevrolet Impala, page #47

Chevrolet Impala Price Analytics

About Chevrolet Impala

Auto blog

GM tells owners not to use SUV wipers due to fire risk

General Motors is recalling 31,685 examples of the 2016 Buick Enclave, Chevrolet Traverse, and GMC Acadia because a short circuit in the windshield wiper motor can potentially lead to a fire. Due to the danger, the company is asking owners not to use the wipers until the problem is fixed, according to The Detroit Free Press citing the Associated Press. A manufacturing defect in the wiper motor cover means that the electrical terminals can come into contact and cause a short. The part could "melt, smoke, or catch fire," according to a statement from GM. The company will get them fixed immediately, and dealers will replace the cover. If there's bad weather at the time the owner specifies to get the recall work completed, the automaker will come pick up the crossovers. Depending on parts availability, the automaker will supply a rental car for customers, as well. The issue was discovered at the factory. According to the company's statement, only 6,405 actually made it to customers, and they were notified immediately by overnight letter. The rest were in dealer stock. The affected crossovers carry build dates between August 18, 2015 and September 24, 2015. Of those, there are 29,295 in the US and 1,073 in Canada. GM Statement: General Motors has told the National Highway Traffic Safety Administration that it will recall approximately 29,295 2016 model year Chevrolet Traverse, Buick Enclave and GMC Acadia SUVs in the U.S. because the front windshield wiper motor may overheat when in use because of a manufacturing defect. In some cases, the front windshield wiper motor cover may melt, smoke or catch fire. The approximately 6,405 customers who have taken delivery of these vehicles were notified by overnight letter and are urged to contact a GM dealer as soon as possible to arrange a service appointment. These customers should not use the front windshield wipers until they have been repaired. If weather conditions prevent driving the vehicle without using the windshield wipers, GM will arrange to pick up the vehicle for servicing. If repair parts are unavailable, GM will provide a rental car at no cost until parts become available. The total population, including Canada, Mexico and exports, is approximately 31,685. About 25,280 of these vehicles are in dealer stock and will not be sold until repairs are made.

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

Anti-purist 1963 Ferrari GTE sports hot rod Chevy V8

I remember reading a story around the time Fast and Furious: Tokyo Drift came out. It focused on one of the star cars of that film, a 1967 Ford Mustang fastback that started the film as a shell, and in a pinch, was transformed into a modified masterpiece, complete with the RB26DETT engine from a Nissan Skyline GT-R (which started the film under the hood of an S15 Silvia). There was a genuine (and in our minds, absurd) fear in the article that taking a piece of classic American iron and fitting a twin-turbocharged JDM engine would result in some awful trend in the classic car community. If you thought a GT-R-powered classic Mustang was sacrilege, though, this car will probably make you vomit. For the rest of us, it's a neat piece of engineering. Shown above is a 1963 Ferrari 250 GTE, and yes, that's a 302-cubic-inch, small-block Chevrolet V8 under the hood. On top of that, it uses the six-speed manual transmission from a Viper, a nine-inch Ford rear end, and Mitsubishi-sourced paint. So yeah, it's a FrankenFerrari. Check out Road Heads' interview with this custom GTE's owner, which is followed by a brief test drive. And of course, head into Comments afterwards, and let us know what you think. Is this Yankee-powered 250 GTE blasphemous or badass?

Chevy Bolt interior spied for first time

Chevrolet is continuing work on its Bolt EV, but thanks to some public-road testing in what looks to be somewhere in Michigan, we've captured our first look at the new hatchback's screen-intensive dash. Looking like a blend of the Chevy Sonic with the new Volt, the Bolt's interior follows a simple formula, offering a digital display in place of the traditional instrument cluster alongside a large, prominent display in the center stack. Nothing too shocking, except for the fact that both displays look larger than what's in the Volt. What's most surprising, though, is the shifter. It looks almost BMW-like in appearance. There's a dedicated park button accessible by the driver's thumb, and we're guessing a trigger on the front that can toggle the lever forward into reverse and backwards into drive. The central display, meanwhile, looks like it's running some very different looking software, compared to Chevy's usual MyLink fare. We can't be sure whether this is simply some development software that's free of polish and not intended for production, or a look at a new form of Chevy's connectivity suite. Aside from some different wheels, the exterior of this prototype looks unchanged from the last round of spy photos we captured of the new Bolt. Sorry kids, no new exterior styling to show you today. Still, we've included the entire crop of spy images, covering a variety of exterior angles along with several shots of the interior. Related Video:

Callaway rolls out radical Corvette C7 GT3-R at Hockenheim

Leave it to Callaway to take a badass Corvette and make it even more so. Case in point: the new Callaway Corvette C7 GT3-R you see here. It made its big debut this past weekend during the season finale for the ADAC GT Masters series at the legendary Hockenheimring – the on-again, off-again home of the German Grand Prix. Why in Germany, you ask? Because that's where Callaway Competition is based. The racing division got its start in Heilbronn as Woeher & Ciccone back in 1985. It joined with US-based Callaway Cars in 1988 to distribute its modified Corvettes in Europe, and branched out into constructing racing cars in 1994. And this is its latest project. Designed in partnership between Callaway Competition in Germany and Canadian designer Paul Deutschman, the new GT3-R replaces the previous C6-based Z06.R GT3. It packs a 6.2-liter V8 pumping 600 horsepower through an X-Trac six-speed sequential gearbox. And as you can see, it sure looks the part. Callaway will be offering the new GT3-R to privateer teams for entry in a variety of racing series around the world. But it'll also be fielding the example you see here, sponsored by Whelen Engineering that – like Callaway Cars – is based in Connecticut. Callaway Corvette C7 GT3-R World Debut at Hockenheim October 3, 2015 Hockenheim, Germany – October 3, 2015 – This weekend's ADAC GT Masters Season Finale was the backdrop for the unveiling of Callaway Competition's new Callaway Corvette C7 GT3-R. Following a brief presentation to media and invited guests, the successor of the C6-based Callaway Z06.R GT3 was displayed to the public for the first time on October 3, 2015 at the Hockenheimring in Germany. Constructors of GT race cars since 1990 and based in Leingarten Germany, Callaway Competition possesses a wealth of experience, technical know-how and a broad network of specialized professional partners. These elements were crucial to conduct such a large undertaking. After nearly two years of comprehensive planning, intensive development and expert fabrication of vehicle components, Callaway Competition completed the first C7 GT3-R just a few weeks ago. Its striking design comes as a result of the collaboration between Canadian designer Paul Deutschman and team owners Giovanni Ciccone and Ernst Wohr. Mike Gramke, Uwe Hoffmann, Florian Mohring and Andre Zanke were also heavily involved in the vehicle's development.

2016 Chevrolet Colorado Diesel First Drive [w/video]

The first thing you notice inside the diesel Chevy Colorado is that it's quiet. Almost too quiet. A lot has been done to quell noise and vibration with this new powertrain, and it shows – or rather, doesn't. There's some characteristic diesel clatter at idle, but even then it's distant and practically disappears as you start moving down the road. At full throttle, when the engine is at its noisiest, the sound isn't particularly diesel-like, just a pleasant intake breath. The accompanying smoothness is almost eerie. When we ask where all the noise went, Chevy's engineers, marketing guys, and PR reps all explain that this refinement is what Americans want. We're still not sure. This is a truck, after all, and the diesel pickup customer is different from the guy buying a diesel Cruze for his highway commute. Chevy contends that they're also not the same as the buyer of a Silverado HD. Although this 2.8-liter Duramax four-cylinder has been in service elsewhere around the globe, its first US application is in the Colorado and its GMC Canyon twin. The engine puts out 181 horsepower and 369 pound-feet of torque, and it does so unobtrusively as a result of a lot of modifications for our market. To keep normal diesel sensations out of the cabin, the intake and oil pan both get acoustic treatments. A new, thicker material is used for firewall sound deadening. Redesigned balance shafts have tighter tolerances to increase smoothness. The diesel powertrain is smoother than the Colorado's gasoline V6. One of the more interesting and certainly unexpected vibration-reduction changes is a special torque converter from German supplier LuK equipped with a centrifugal pendulum absorber. This pendulum spreads from the center of the torque converter as engine speed increases and is tuned to absorb the four-cylinder's second-order vibrations, not just those in a narrow frequency band. It does an admirable job, especially considering the engine's biggish, 0.7-liter cylinders, which lead to bigger vibrations. The result is a powertrain that's smoother than GM's (not particularly smooth) corporate V6, which is available in the standard Colorado. It's quieter than a Cruze diesel and even out-softens some gas direct-injection engines on the market. Paradoxically, it may be the most refined of all of the Colorados. No vibration comes through the steering wheel, pedals, floorboards, or even the rearview mirror. But you can tell it's a diesel when you hit the throttle.

Autoblog In Cuba: 1957 Chevy Bel Air Review

If you've been following the Autoblog In Cuba series, you may remember that my efforts to rent a car in the country were ultimately unsuccessful. Misinformation, bad planning, and a lack of rental car inventory conspired to disrupt my hoped-for driving adventure. I discovered in my week of exploration, however, that the terrific thing about Havana is that there's always another adventure to be found – if you're willing to look. A car I could drive myself might have been impossible to come by, but a ride to remember was not. After all, even when reviewing a new car, I've found that impressions about the car and the route can be credibly formed from the right seat. Starting from the parking lot of the grand Hotel Nacional, finding an interesting car for hire is as simple as walking up and down the block. Scads of classic American iron wait just outside the hotel gates, in a riot of colors and conditions befitting the tropical climate. Fords from the 1940s are plentiful – more sedans than coupes – and the glory days of General Motors are represented by enough Pontiacs and Cadillacs to fill a Bruce Springsteen B-sides album. But the Chevy Bel Air is the king of the road here, by some margin. View 30 Photos I settled on a burnt orange 1957 Chevy Bel Air convertible, in tourist-appropriate condition. I was looking for a hardtop at the request of my crew's audio/video needs, but settled on a burnt orange 1957 Chevy Bel Air convertible, in tourist-appropriate condition. This car might look good as a prop in the background on your vacation photos – hair blowing in the breeze with the ocean at your back, parked in front of Che's face in Revolution Square, etc. – but was far from pristine on a closer inspection. A perfect representative of the Cuban average. At least the price was right: $50 for two hours to make it 12 miles to Hemingway's house, and back. My driver was a kid named Daniel who looked to be about 20 years old. The Chevy doesn't belong to him, he co-drives it with the owner, but he was able to give me the basic mechanical rundown. The eight- or six-cylinder engine that Chevy shipped this convertible with was long gone. No surprise there, as nearly every American-made car I'd ridden in so far was powered by some belching Mercedes diesel. Despite it's clattering note, Daniel said the lump under the hood of the '57 drinks gas: a four-cylinder of Russian origins, pulled out of a GAZ Volga as best I can understand.

Let's Drive NYC is GM's car sharing program for the Big Apple

Under a new car sharing program offered by General Motors and others, a New York Minute will cost about 15 cents. GM is working with a luxury-apartment building owner and a parking lot operator to run a car sharing program in Midtown Manhattan. The program is called Let's Drive NYC and it was announced Thursday. Let's Drive NYC is being offered to residents of the Ritz Plaza, a 479-unit luxury apartment building near New York's Times Square. The program is being run with the help of Icon Parking Systems, which runs about 200 parking garages in Manhattan where the cars can be parked. GM is contributing eight Chevrolet Trax crossovers and two Chevrolet Equinox SUVs, and the automaker is slated to add more vehicles "later." Residents of the Ritz Plaza, which is owned by Stonehenge Partners, can make "periodic apartment lease payments" and in exchange receive electronic credits for three hours of driving a month. After those three hours are up, the drivers will be charged less than $10 an hour, or as much as $75 a day. The program was piloted earlier this year to some of the apartment's tenants. The program marks the second bit of car sharing news in New York within the past two months. In August, Mercedes-Benz and Smart parent Daimler announced that its Car2go car sharing service would expand into Queens and add about 100 Smart ForTwo two-seaters to the city's program. Car2go made its New York debut in Brooklyn last October and has attracted more than 27,000 members since then. You can take a look at Let's Drive NYC's press release below. GM Unveils 'Let's Drive NYC' Car-Sharing Program NEW YORK, Oct. 1, 2015 /PRNewswire/ -- Running an errand to a big box store or planning a weekend excursion are about to get easier for some Manhattan residents because of a car-sharing program revealed today by General Motors. It's the company's latest move to deliver urban mobility options to customers around the globe. Let's Drive NYC is available to eligible residents of The Ritz Plaza, a 479-unit luxury apartment building at Times Square in midtown Manhattan, owned and managed by Stonehenge Partners. Residents use a GM-developed mobile app to reserve a vehicle and access parking in one of 200 garages throughout Manhattan managed by Icon Parking Systems. The fleet currently includes eight Chevrolet Trax small SUVs and two Chevrolet Equinox compact SUVs, with more vehicles to be added later.

New Chevy Small Block crate engine has 405 hp, endless possibilities

With decades of history, the Chevrolet Small Block V8 has definitely stood the test of time, and the company has kept finding ways to make it better. At this year's SEMA Show in November, Chevy Performance is unveiling the latest upgrade to that legacy with the new ZZ6 350-cubic-inch (5.7-liter) crate engine. Offering 405 horsepower and 405 pound-feet of torque, the mill should add a big dose of power to any project car. For the ZZ6, Chevy is working to improve the Small Block's high-rpm performance. To make that happen, the engine has Fast Burn aluminum cylinder heads and an updated valvetrain inspired by the LS family of powerplants. Large intake runners help with the airflow, and the valve springs use a tapered design that allows for less reciprocating mass. The mill also packs a forged steel crankshaft and high-silicon aluminum pistons inside of a cast iron block. Chevy is offering the engine in two versions depending on what the builder needs. The Base configuration comes with an intake, distributor, water pump, and a few other parts but lacks carburetor and accessories. Conversely, the Turn Key option has everything, including the carb, air cleaner, starter, alternator, and more. More details about their availability will be announced at SEMA. NEW ZZ6 CHEVY SMALL BLOCK ADVANCES CRATE ENGINE LEGACY Revised Fast Burn heads with LS-inspired valvetrain enhance high-rpm performance 2015-10-02 DETROIT – Developed with contemporary technologies, including a high-rpm valvetrain, Chevrolet Performance's new ZZ6 crate engine offers builders a modern twist on the classic Chevy Small Block 350. It uses updated Fast Burn cylinder heads with beehive-style valve springs inspired by the LS engine family – a feature that enhances high-rpm capability, enabling the new high-performance engine to achieve 405 horsepower and 405 lb-ft of torque. That's more power than any factory produced 350 engine ever installed in a Chevrolet production vehicle and it's one of the most powerful 350 Small Block-based crate engines in the nearly 27-year history of the "ZZ" lineup. "The new ZZ6 is the ultimate ZZ 350-based crate engine from Chevrolet Performance," said Jim Campbell, GM U.S. vice president of Performance Vehicles and Motorsports.

2016 Chevrolet Volt First Drive

There's a hit vehicle hiding in GM's formula for the Chevy Volt. You can sense it in the enthusiasm that current Volt drivers have for their cars. You can see it in the amount of money GM has poured into its extended-range electric vehicle project. And perhaps most importantly, you can feel it from the driver's seat of the new, second-gen model. The big question is whether or not GM will be able to turn its much-hyped 'halo car' into a best-seller this time around. After driving it in northern California, I can tell you that the Volt is tremendous. But we all know it takes more than that to create a hit. GM has so far sold over 82,000 Volts in the US. That's respectable, but in the early, glory days before the car launched, company representatives were talking about much more impressive numbers. With a few years to talk to customers and potential prospects, GM has learned a lot about what makes someone buy a Volt. For the 2016 model, Chevy has changed just about everything for the better. The new Volt has more all-electric range (53 miles vs. 38 in the first generation), is more fuel efficient whether you're looking at the overall value (106 combined MPGe vs. 98) or just when the car burns gas (42 miles per gallon vs. 37). All of that means that the car's overall range is bumped up to 420 miles, from 380. The battery is smaller and lighter while offering more energy capacity. The range-extending gas engine is bigger (1.5 liters vs. 1.4) but it's also more efficient and can burn regular gasoline instead of just premium. The Volt's overall range is bumped up to 420 miles, from 380. The cost is lower, too: $33,995 vs. $34,170, before incentives. This is a car that GM thinks will compete against the Toyota Priuses and Nissan Leafs of the world (as its new ads make abundantly clear). All three cars have completely different powertrains, but we all know that they're the headline green cars of our time (along with Tesla), so buyers will have to want to pony up a bit more money if they like what the Volt is offering. The 2016 Leaf with its 107-mile range starts at $37,640 (before incentives), while a 2015 Prius can be had for $25,035 (pricing for the 2016 has not yet been announced). So, on paper, the new Volt is an all-around winner. I'm here to tell you that it wins on the road, too. You can't help but notice the changes. They are literally front and center.