2000 Chevy Corvette 5.7l V8 6 Speed Manual Low Mileage Loaded Leather on 2040-cars

Auto blog

GM learning from current Chevy Volt owners as it works on next-gen model

Details of the second-generation Chevrolet Volt extended-range plug-in hybrid are coming in at a trickle, and the latest is that the 2016 model-year Volt will be improved in all meaningful areas, including performance and all-electric range, says General Motors powertrain director Larry Nitz. 60 percent of Volt customers only charge using a standard 110 outlet. Nitz was speaking to Autoline After Hours about the current and future Volt. He said that GM has been tracking Volt driving habits and found that about two-thirds of the Volts' collective miles are driven in electric mode, and that 81 percent of all Volt trips were done in pure EV mode. Additionally, Volt drivers plug the car in 10 times each week, on average. Nitz also said 82 percent of the Volt's commuting miles are coming from the plug instead of the gas tank. Oh, and 60 percent of Volt customers only charge using a standard 110 outlet. Last month, GM released a teaser shot of the 2016 Volt (above) and said the car would make its worldwide debut at the 2015 North American International Auto Show next January. Earlier this year, the Volt was reported to be getting a new chassis for the upcoming version. The Volt could use a bit of new life. Through August, Volt sales were down 12 percent from a year earlier to 13,146 units, and sales plunged 25 percent alone. That compares unfavorably to the Nissan Leaf battery-electric vehicle, whose 2014 sales have jumped 34 percent to almost 19,000 units. You can see Nitz dish the goods in the video below (Volt comments start at around minute 15). You will also notice AutoblogGreen contributor Gary Witzenburg talk about his history with the EV1 and share his take on the Volt. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.

GM marks 500 million vehicles

General Motors is marking a major global milestone, as 500 million vehicles have rolled off its assembly lines since the company's founding in 1908. To mark the occasion, the automaker is continuing to invest in production and offering a one-time discount to some customers. GM North America boss Alan Batey used the festivities to announce the Fairfax Assembly factory in Kansas as one of the sites earmarked for the company's $5.4 billion in upcoming investments. The plant will get $174 million of that money for new equipment and technology to build the 2016 Chevrolet Malibu. Among the upgrades will be a shake-and-rattle booth that will simulate road conditions to find squeaks. To commemorate both the production milestone and the Fairfax plant, Batey and company CEO Mary Barra also gave away a 2016 Malibu to a wounded Iraqi war veteran, and the two execs announced that in the third week in May all GM employees can share a one-time customer appreciation discount with friends to help get them into the automaker's products. Barra also gave a speech to the workers there about some of the other milestone's in the company's history, which you can read below. Innovation on the Line: GM Manufacturing Milestones Many of General Motors' most important innovations have occurred behind the scenes, in its manufacturing facilities. Concepts such as changeover, flexible assembly, automation, computer simulation, machine vision and robotics were developed at GM. Over the decades these innovations have helped enable improvements in vehicle quality, efficiency and competitiveness. 1901: Ransom Olds' famous Curved Dash Oldsmobile, designed with simplicity, reliability and value in mind, was the first American car built in a factory designed specifically for automobiles and in standardized volume production. GM acquired Oldsmobile in 1908. 1908: Cadillac wins the Dewar Trophy, Europe's most prestigious award for precision and excellence in manufacturing, by demonstrating the auto industry's highest standards for precision and interchangeability of parts by disassembling three Cadillacs and mixing the parts randomly before reassembling and driving them before a contingent of judges. 1922: GM hires William Knudsen to lead Chevrolet's turnaround. Knudsen implements flexible mass production, which helps Chevrolet incorporate annual styling changes and take market share from Ford.