1991 Chevrolet Corvette Base Convertible 2-door 5.7l on 2040-cars

Auto blog

EV tax credits: Here's every electric car or plug-in hybrid that qualifies

Starting on April 18, the Internal Revenue Service released new guidance for U.S. buyers shopping for a new electric or plug-in hybrid vehicle. On April 18th, the IRS showed only six fully electric vehicles on the qualified list, but a day later Volkswagen confirmed its U.S.-built ID.4 also qualifies. That means right now, seven fully electric vehicles qualify for the full $7,500 EV tax credit, with three more from Chevrolet coming for the 2024 model year (we would expect these 2024 models to roll out slowly and be difficult to find for at least the first few months they are on the market). In addition to those seven fully electric cars, two plug-in hybrids also qualify for the full $7,500 credit. To qualify, a vehicle must be assembled in North America and must meet a strict set of guidelines that cover where battery materials were sourced. If any battery materials come from certain countries (importantly including China), the vehicle's tax credit is automatically cut in half. Further, according to the IRS, the vehicle's manufacturer suggested retail price (MSRP) can't exceed $80,000 for vans, sport utility vehicles and pickup trucks or $55,000 for any other type of vehicle (basically meaning sedans). Electric vehicles that qualify for the full $7,500 EV tax credit: Cadillac Lyriq (2023-2024) Chevrolet Blazer EV (2024) Chevrolet Bolt EV (2023-2024) Chevrolet Bolt EUV (2023-2024) Chevrolet Equinox (2024) Chevrolet Silverado (2024) Ford F-150 Lightning — all models (2022-2023) Tesla Model 3 Performance (2022-2023) Tesla Model Y — all models (2022-2023) Volkswagen ID.4 — U.S.-built models (2022-2023) Plug-in hybrid cars that qualify for the full $7,500 EV tax credit: Chrysler Pacifica PHEV (2022-2023) Lincoln Aviator Grand Touring (2022-2023) A smaller credit is offered on fully electric cars and plug-in hybrids that are assembled in North America but have batteries with materials sourced from unqualified countries (mostly China).

Camaro spy shots show subtly different grille, front fascia

It looks like there some changes in store for the Chevrolet Camaro - the only thing is that we just don't know what Chevy has up its sleeve. Looking at these spy shots, we'd initially be inclined to think that there is just a minor facelift or a new special edition, but upon closer inspection, there are a few oddities about this car that definitely have us intrigued.
The most obvious difference on this prototype is the slightly restyled front fascia with a smaller lower air inlet and the two-bar grille. Then we get to some of the car's mysterious details. For starters, this fascia has the SS vent above the grille, but it looks to be blocked off. Granted this could just be a one-off piece used for testing. What really piqued our interest was at the rear of the car where it has quad exhaust outlets that are used on the ZL1. Could this be the LS7-powered Camaro that we reported on back in December?
At this point, your guess is as good as ours as to what we're looking at here, so let us know in the comments what you think this could be.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging