1991 Chevrolet Caprice S/w on 2040-cars

Auto blog

Why does the Corvette Stingray have so many vents? Here's why

Just looking at the new 2014 Chevrolet Corvette Stingray, it's not hard to see that the car's design was created with aerodynamics at the forefront, but Chevrolet designers point out exactly what went into designing the iconic coupe in a pair of recently released videos. The videos show the Corvette going through early design phases, including clay models and wind tunnel tests, as well as talking to the car's chief engineer, Tadge Juechter.
Both videos help explain various aspects of the C7 Corvette, but it's the aero tuning of the car that is most interesting. This includes extra attention paid to the lower air dam and vented hood to help reduce drag and lift, while the rear quarter inlets are for differential and transmission cooling. Juechter said that some of these aero-tuned elements were inspired from GM's involvement in racing.
If you have about five minutes and you can't get enough information about the new 'Vette, then check out the videos posted below.

'Killing a Duramax' Gale Banks YouTube series methodically tunes a diesel to death

Learning or perfecting a skill by watching YouTube videos is known as attending YouTube University. GM Authority picked up on one of the video site's more fascinating courses, hosted by Gale Banks; in a fair world, he should be referred to as Professor Banks when it comes to diesel engines and truck tuning. A few months after GM introduced the updated L5P 6.6-liter Duramax diesel V8 in the 2020 Chevrolet Silverado HD and GMC Sierra HD that ships with 454 horsepower and 910 pound-feet of torque, Banks decided he wanted to methodically tune the engine to death. The purpose of the resulting series, called "Killing a Duramax," is to push more power out of the engine in order to discover which parts break and when — or, as Banks puts it, force-feed the Duramax "until the crank hits the street and the heads hit the hood." With that knowledge, Banks can figure out all the weak points on his way to building what he calls a "Superturbo," that being a supercharged, twin-turbo race engine with more than 1,000 hp. What makes the series fascinating is Banks' knowledge, paired with the company's comprehensive iDash engine monitoring system that keeps tabs on a glut of parameters every step of the way. So for instance, you get Banks explaining the differences between inches of mercury and barometric pressure, how those are different from the water content of the air measured in grains, then showing those readouts on the iDash, then explaining in detail how they affect the air density in the Duramax system. The stock Borg-Warner variable turbo gets a lot of airtime — Banks accuses it of being "out to lunch" because he feels it's the weakest link on the engine. That turns into a turbo teardown and a deep explanation of performance pitfalls, such as when air pressure on the turbine begins to diverge from the boost pressure coming from the compressor. Banks says he can keep close tabs on where power's coming from, because the iDash monitors the horsepower contribution provided by the ambient air, the turbo, and the intercooler separately. The major changes so far are a stouter Precision 7675 turbo and TurboSmart wastegate (episode 5), a twin intake (episode 6), a custom liquid-cooled intercooler from a marine engine, a new GM oil cooler and synthetic oil (episode 10), and new injectors (episode 11).

5 classic trucks and their polarizing modern revivals

EVs are helping eliminate Detroit's gas-guzzling problem. Some revivals of gas-powered classics are getting the EV treatment.  But not every revived model looks exactly like its original counterpart. We're in a new era of hulking Detroit metal, and you can thank EVs. Americans can't get enough of their big, beefy trucks and SUVs. But for many years, some of the biggest gas guzzlers fell out of fashion as gas prices rose and emissions regulations tightened. But in the past few years, some of the most iconic American truck nameplates have been brought back to life with electric motors, like the GMC Hummer. In other cases, as with the Ford Bronco, improvements in engine technology and more interest in rugged adventure vehicles made a gas-powered revival possible. Even some revivals that started as gas-powered, like the Chevy Blazer and the Jeep Wagoneer, are now getting electrified spinoffs. (Even if they don't always look quite as sleek as their original inspiration.) Here are side-by-sides of five classic American trucks and their modern counterparts. The Jeep Wagoneer 1975 Jeep Wagoneer and 2024 Electric Jeep Wagoneer SStellantis After a long wait, Jeep released its revival of the classic Wagoneer and Grand Wagoneer in 2020. Starting later this year, an electric version of the luxury Jeep SUV will join the Wagoneer lineup. The Chevrolet Blazer A 1973 Chevrolet Blazer and a 2024 Chevrolet Blazer EVGetty Images, General Motors The Chevrolet Blazer was first rebooted in 2019 as a sporty family SUV. The modern Blazer shares zero resemblance to its boxy, off-roading older sibling, but it has still managed to become one of Chevy's more popular SUVs in recent years. The Blazer EV came later, and was one of the first models GM built on its new Ultium battery platform. The Hummer A Hummer H2 and the 2023 Hummer EV pickup truckGetty Images, General Motors Once the poster child for Detroit's big, bad gas guzzlers, the Hummer got new life as an electric pickup truck in 2021. The Ford Bronco A 1971 Ford Bronco and a 2022 Ford BroncoFord Motor Co. After a rouge group of engineers and designers inside Ford spent years trying to breathe life back into the Blue Oval's boxy off-roader, the Ford Bronco was finally resurrected in 2020 amid a rise in popularity for rugged adventure vehicles. The Ford Ranger 1985 Ford Ranger and a 2024 Ford RangerFord Motor Co.