1969 Camaro Pro-touring / 350 /factory 4 Speed on 2040-cars

Auto blog

First 2015 Chevy Corvette Z06s en route to owners [w/video]

Pretty much right on schedule, Chevrolet has begun shipping the very first customer examples of its 650-horsepower, supercharged Corvette Z06. In fact, according to General Motors, the earliest Z06s could be in customer hands by the end of this week. "It has been an incredible opportunity to work on Chevy's most capable model," said Jeff Lamarche, manager of Chevy's Bowling Green Assembly plant. "It truly is an amazing car, and we're thrilled to get them into the hands of our eager customers." Prices for the Z06 start at $78,995 for the hardtop model, while the first-ever Z06 Convertible kicks off at $83,995. Take a look below for the official press release from Chevrolet, and while you're down there, we've slipped in a new video of Corvette Racing's Tommy Milner taking a hot lap of Road Atlanta in a Z06, complete with some Performance Data Recorder footage. First 2015 Corvette Z06s on Their Way to Customers Most capable model in Chevrolet's history now shipping from Bowling Green BOWLING GREEN, Ky. – Chevrolet is now shipping the all-new 2015 Corvette Z06 coupe from Bowling Green Assembly and some early customers could receive the much-anticipated supercar later this week. "It has been an incredible opportunity to work on Chevy's most capable model," said Jeff Lamarche, plant manager of General Motors' Bowling Green Assembly plant, "It truly is an amazing car, and we're thrilled to get them into the hands of our eager customers." The new Corvette Z06 offers the most choice for customers in the model's history. It is the first Z06 to offer an available eight-speed paddle-shift automatic transmission and, thanks to a stronger aluminum frame, a removable roof panel. In addition, it is the first time since 1963 that the Z06 is available as a convertible – which will arrive in early 2015. The new LT4 supercharged 6.2L V-8 engine is SAE-certified at 650 horsepower (485 kW) at 6,400 rpm and 650 lb-ft of torque (881 Nm) at 3,600 rpm – making the 2015 Corvette Z06 the most powerful production car ever from General Motors and one of the most powerful production cars available in the United States. To balance performance and efficiency, the LT4 leverages a trio of advanced technologies – direct injection, Active Fuel Management (cylinder deactivation) and continuously variable valve timing –with a new, more efficient supercharger. The LT4 helps make the Corvette Z06 the most capable car in the brand's history.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

2021 Chevy Colorado and GMC Canyon facelift spied

The Chevy Colorado and its GMC Canyon twin have been on sale for a good long time now, and while things move a little more slowly on the truck side when it comes to facelifts and model changeovers, it seems like it’s about time. So itÂ’s no surprise to see some lightly camouflaged trucks running around ahead of what appears to be a minor refresh for the 2021 model year. Starting with the Colorado, it appears to have a bowtie hiding behind some camo in the center of the grille, which otherwise looks like the no-bowtie option you can get on 2019-and-up trucks. It could be that Chevy is keeping the no-bowtie grille design but allowing a bowtie to grace it, or it could be misdirection. Either way, the grille pattern adds a bit of flair to the otherwise staid front end design. There also appears to be a bit more shape to the lower air inlet, with echoes of some of the lower fascias of its bigger Silverado stablemate. The Canyon, on the other hand, shows more extensive front-end changes. At first glance, it looks to emulate some variants of the GMC Sierra, which would make sense given those modelsÂ’ changes for the 2020 model year. In particular, this Canyon has hints of Sierra HD, being more square and monolithic than the regular Sierra 1500s, although itÂ’s a little hard to tell with the camo covering the edges of the grille. It could certainly also adopt more rounded corners like the 1500s. Either way, itÂ’s more vertical and thereÂ’s less differentiation between the upper grille and lower opening. ThereÂ’s nothing in the way of changes around the sides or back, and while there may be some minor changes inside, we arenÂ’t expecting any. The word around town is that this isnÂ’t a full facelift, but rather a minor front end tweak thatÂ’ll just be a regular part of the model-year changeover.