1969 Chevrolet C10 Custom Shortbed Fleetside Street Rod W/ A/c From New Mexico on 2040-cars
Lemont, Illinois, United States
Body Type:Pickup Truck
Vehicle Title:Clear
Engine:350
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 8
Make: Chevrolet
Model: C-10
Trim: Custom
Power Options: Air Conditioning
Drive Type: RWD
Mileage: 99,999
Exterior Color: Blue
Disability Equipped: No
Interior Color: Blue
Warranty: Vehicle does NOT have an existing warranty
Up for sale is my 1969 Chevrolet C10 Custom short bed pick up. The truck came from New Mexico so it was pretty much rust free and only needed the outer rocker panels replaced. Otherwise it had misc. dents and sun fade. Body and paint work alone was $5k. Truck was painted last summer. Inside the bed has minor dents so we repainted the same color but left the paint a flat color. I also replace all the body side moldings with new reproductions. All door weatherstrips including the vent windows, side marker lamps and tail lights and bezels. New windshield and both front and rear glass rubber seals. The bumpers and grille are original and I would call them driver quality. The truck has a stock 350 engine with a Edelbrock intake, Holley carb and a HEI distributor. 400 auto trans, power steering and factory air. The a/c is missing the compressor, hoses, and condenser. The a/c box is still in place. Suspension and drum brakes are still stock except the 3.5 and 5 inch dropped springs. Recent coil springs, ball joints, shocks, and Flowmaster exhaust system. Call or text with any questions, or send message thru Ebay. You are welcome to come see the truck in person or have it inspected by a third party. Truck is located near Chicago. I reserve the right to end the auction at anytime because I also have the truck listed locally. Thanks. Art 630-664-1161 See video http://youtu.be/drH3T64V6p0
Chevrolet C-10 for Sale
Auto Services in Illinois
USA Muffler & Brakes ★★★★★
The Auto Shop ★★★★★
Super Low Foods ★★★★★
Spirit West Motor Carriage Body Repair ★★★★★
South West Auto Repair & Mufflers ★★★★★
Sierra Auto Group ★★★★★
Auto blog
Why 2015 is going to be a huge year for trucks
Thu, Jan 22 2015Nissan chief executive Carlos Ghosn took center stage to introduce the 2016 Titan last week at the Detroit Auto Show. He spoke of the truck's new features, impressive Cummins V8 diesel engine and the extensive amount of time and money required to build a modern, competitive pickup truck. "We have done all of this because we see opportunity – an opportunity in the unmet needs of today's American truck customers," Ghosn said. He was speaking about the Titan, but his thoughts echo the industry's mindset: When it comes to trucks, find an opportunity and attack. Even with CAFE regulations looming and fickle consumer preferences, investing in trucks is a no-brainer for automakers. Some consumers will always need a truck for their job or lifestyle. And some people will always want one, whether they need it or not. With that in mind, here are four reasons why the pickup-truck sector is more important than ever and poised for growth in 2015. View 24 Photos The Nissan Titan Is Back Okay, it never left, but the Titan hadn't been redesigned since its launch in 2003, and Nissan sold more NV200s than Titans in 2014. It's an understatement to say the truck was languishing. That all changes with the 2016 model. The Titan will come in two variants, a traditional fullsize competitor and the Titan XD. The XD will lead the market launch, and it arrives late this year. It's pitched as a "whitespace" offering, Nissan sales and marketing vice president Fred Diaz said. The idea is to offer something in the general size and price range of a fullsize truck, but also have some of the capability of a heavy-duty truck. The XD uses a fully boxed ladder frame, the chassis design from Nissan's commercial division, and the wheelbase is about 20 inches longer than other Titan models. The XD, which Nissan is calling the flagship of the line, will be the only model with the 5.0-liter Cummins turbodiesel V8. It produces 310 horsepower and 555 pound-feet of torque, while being able to tow 12,000 pounds. V6 and V8 gasoline models will also be offered on the Titan XD and the standard, non-XD model. When production ramps up, the Titan will be sold with several cabs, beds and trims. New features include trailer sway control, an integrated trailer brake controller, more storage options in the cabin and even laminated front and rear side glass to reduce outside noise. All of this has given Nissan fresh confidence in an area where it admittedly has been lacking. "We can compete," Diaz told Autoblog.
The Chevrolet Bolt is headed to China as a Buick SUV
Thu, Jan 16 2020When spy photos of what appeared to be Chevrolet Bolt EV with some minor front- and rear-end updates circulated last week, Autoblog surmised that GM was working on some sort of Bolt-based vehicle — potentially a crossover — to be sold in China as a Buick. We may just have corroboration for that theory. On Thursday, Motor1.com spotted a story published earlier this week on the Chinese site Auto Home which claims that GM has applied to sell an all-electric SUV under the Velite 7 nameplate in China. There's little differentiating the Velite 7's exterior from the Bolt EV's, apart from bumpers, badges, and a little extra ground clearance. Up front, the bowtie is replaced by a round Buick badge, and the bumper picks up an almost Prius-like appearance thanks to contrasting vertical elements and a thin grille bleeding into the head lights to give it a full-width appearance. Chevy Bolt-based prototype View 16 Photos If the Chinese report is accurate, there is one significant difference under the skin. Per the application, the Buick crossover variant is to be powered by a 174-horsepower electric powertrain. That's down 26 horsepower from the Bolt EV's powertrain, and we can't help but think that a lifted Buick variant might just need every pony it can get. The needs of the Chinese market are unique, and we're certain GM knows what it's doing if these figures are accurate. We have no reason to believe Buick plans to sell the Velite 7 EV here in the States, though we expect an updated Chevy Bolt eventually, and we wouldn't be surprised if Buick brings something along shortly to fill the void left by the departure of the Regal sedan and its variants. Related Video:
GM sees 'strong year' in 2018, then gold in Chevy Silverado for 2019
Tue, Jan 16 2018DETROIT — General Motors said on Tuesday it expects earnings in 2018 to be largely flat compared with 2017, but that profits should pick up pace in 2019 as its revamped line of high-margin pickup trucks hits the U.S. market. The 2018 earnings outlook was above market expectations, sending GM shares up more than 3 percent in premarket trading. "GM had a very good 2017 as we continued to transform our company to be more focused, resilient and profitable," GM Chief Executive Mary Barra said in a statement. "We are positioned for another strong year in 2018 and an even better one in 2019." GM and its Detroit rivals, Ford and Fiat Chrysler Automobiles, are bringing on new trucks at a time when overall U.S. new vehicle sales have been falling, but truck sales continue to grow as consumers abandon passenger cars in favor of pickups, SUVs and crossovers. GM on Saturday fired a new round in the battle for profits from one of the U.S. auto industry's most lucrative segments when it showed a new generation of its Chevrolet Silverado pickup truck at the Detroit auto show. The new Silverado, a highlight of the event, is the successor to GM's best-selling vehicle in North America. Sales of the current Silverado rose nearly 2 percent to 585,000 vehicles in 2017. In the coming months, the company will also reveal a revamped GMC Sierra pickup truck. U.S. new vehicle sales fell 2 percent in 2017 after hitting a record high in 2016, and are expected to drop further in 2018 as interest rates rise and more late-model used cars return to dealer lots to compete with new ones. GM said on Tuesday that while it retools a factory in Ft. Wayne, Indiana, to make the new pickup trucks, it will shift some production to an Oshawa, Ontario, plant in order to avoid missing sales in a hot market for the vehicles. The No. 1 U.S. automaker said it will record a $7 billion non-cash charge for its fourth-quarter 2017 earnings related to deferred tax assets. GM said it expects capital expenditure in 2018 of around $8.5 billion, about $1 billion of which will go toward funding self-driving car technology. Last week, the company said it is seeking U.S. government approval for a fully autonomous car — one without a steering wheel, brake pedal or accelerator pedal — to enter the automaker's first commercial ride-sharing fleet in 2019. GM said it expects 2017 earnings per share at the high end of its previously forecast range of $6 to $6.50.