1968 Chevy C10 "fully Restored" on 2040-cars

Auto blog

Why does the Corvette Stingray have so many vents? Here's why

Just looking at the new 2014 Chevrolet Corvette Stingray, it's not hard to see that the car's design was created with aerodynamics at the forefront, but Chevrolet designers point out exactly what went into designing the iconic coupe in a pair of recently released videos. The videos show the Corvette going through early design phases, including clay models and wind tunnel tests, as well as talking to the car's chief engineer, Tadge Juechter.
Both videos help explain various aspects of the C7 Corvette, but it's the aero tuning of the car that is most interesting. This includes extra attention paid to the lower air dam and vented hood to help reduce drag and lift, while the rear quarter inlets are for differential and transmission cooling. Juechter said that some of these aero-tuned elements were inspired from GM's involvement in racing.
If you have about five minutes and you can't get enough information about the new 'Vette, then check out the videos posted below.

Conquest and controversy conclude the 2014 Rolex 24 at Daytona [spoilers]

If you don't wish to know who won the 2014 Rolex 24 at Daytona, you should avert your eyes right now. We'll even give you a double-space to skedaddle...
For those of you still with us, the first race in the United SportsCar Championship (USCC) is done, but the discussions about it certainly won't end for a while. Daytona Prototypes claimed the first four overall places, the top spot taken by the No. 5 Action Express Coyote-Chevrolet Corvette DP driven by Joao Barbosa, Christian Fittipaldi, Sebastien Bourdain and Burt Friselle. The 16th and final caution of the race bunched the field up for an eight-minute sprint to the flag, so the first place getter finished just 1.4 seconds ahead of the No. 10 Wayne Taylor Racing Dallara-Chevrolet Corvette DP driven by Max Angelelli. Third place went to Brian Friselle in the No. 9 Action Express Chevrolet Corvette DP, 20 seconds down. Chevrolet power hasn't taken the overall win since 2003, eleven years later it scores a one-two-three-four. The No. 6 Muscle Milk/Pickett Racing ORECA-Nissan 03 scored fifth place, the top LMP2 finisher.
The Prototype Challenge class win went to the No. 54 CORE Autosport team of Colin Braun, Jon Bennett, Mark Wilkins and James Gue.

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.