2007 Toyota Camry Le Sedan 4-door 2.4l on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

2014 Toyota 4Runner

I recently took the redesigned 2014 Toyota 4Runner for a muddy romp in Pennsylvania. While the mechanical bits and pieces beneath the body-on-frame SUV trudge forward into the new model year with very few tweaks, the truck "receives a rugged new exterior design and interior refinements that add comfort and convenience without sacrificing its hallmark performance capability and excellent value," says the automaker.
A quick visual scan of the 4Runner reveals a new front end with a more "aggressive" and "muscular" appearance (yes, I'm quoting Toyota) that includes new headlights, grille and hood scoop. A roof rack is now standard across all trims, too. While SR5 and Trail grades have a bland color-keyed grille insert that gives the face a monochromatic appearance, the range-topping Limited (shown above and in our gallery) snarls with a silver-plated chin that gives it a bit more character.
New soft-touch surfaces within the cabin provide a more upscale environment and a bright new Optitron instrument panel improves readability and functionality. As before, the SR5 and Trail models arrive with fabric upholstery or optional Softex seats (synthetic leather). Genuine hides are reserved for the Limited trim, which is also fitted with Toyota's unique X-REAS (X-Relative Absorber System) automatic suspension system as standard equipment.

Toyota recalling small number of 2014 FJ Cruisers for possible steering failure

Toyota is issuing a fairly tiny recall to fix a potentially serious problem in the FJ Cruiser. The company is recalling about 120 examples of the rugged SUV from the 2014 model year because the steering can fail. According to Toyota, the intermediate shaft that connects the steering wheel and steering gear box might not be welded correctly and can separate. If this happens, drivers lose steering control, which is obviously a major safety concern. However, the automaker is not aware of any crashes, injuries or fatalities from the problem. On the small number of affected models, Toyota will replace the intermediate shaft with a new one. TOYOTA RECALLS CERTAIN 2014 MODEL YEAR FJ CRUISER VEHICLES TORRANCE, Calif., February 5, 2015 – Toyota Motor Sales, U.S.A., Inc., today announced it will conduct a safety recall of approximately 120 Model Year 2014 FJ Cruiser vehicles. The steering system contains an intermediate shaft, which connects the steering wheel to the steering gear box. In the involved vehicles the intermediate shaft could have received an inadequate weld. Under some circumstances, the weld could separate, resulting in the loss of steering control and increasing the risk of a crash. Toyota is not aware of any crashes, injuries, or fatalities caused by this condition. Owners of the involved vehicles will receive a notification by first class mail. Toyota dealers will replace the intermediate shaft. Detailed information is available at www.toyota.com/recall and by calling Toyota Customer Service at 1-800-331-4331.