Toyota Tacoma, page #31

Toyota Tacoma Price Analytics

About Toyota Tacoma

Auto blog

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.

2018 Hyundai Accent vs subcompact sedans: How it compares on paper

Hyundai first revealed the new 2018 Hyundai Accent a few months ago, but that debut was in Canada for the Canadian-market car. We didn't get our look at the U.S. version until just recently, which is when we also finally got plenty of specifications on the little car. So as we did with the Genesis G70, we've brought you a breakdown of the Accent's specs and some of the segment's best and most popular: the Nissan Versa, Kia Rio, Chevrolet Sonic and Toyota Yaris iA. Before we get to the chart, let's give you a quick reintroduction to the 2018 Accent. The subcompact is completely new this year, and under the hood is again a naturally aspirated 1.6-liter four-cylinder engine. It makes 7 fewer horsepower and 4 fewer pound-feet of torque than the outgoing model with totals of 130 horsepower and 119 pound-feet. This drop in power probably won't be noticeable, though. It's also available with either a manual or automatic transmission, both featuring six speeds. Fuel economy hasn't been announced, but the Rio's numbers below are probably a good indicator as they share powertrains. The one thing that isn't available with an Accent is a hatchback. According to Autoweek, the hatchback was canned with the assumption that hatch buyers would simply purchase an example of the upcoming Kona crossover. But if you want a traditional subcompact hatch from South Korea, Kia is happy to oblige, as the Rio is still available as a hatchback. Learning that the Kona may have killed the Accent hatch causes us to wonder if Kia brought the Rio hatch to the U.S. because it wasn't planning on offering the Stonic. Related Video: News Source: Hyundai, AutoweekImage Credit: Hyundai Chevrolet Hyundai Kia Nissan Toyota Sedan nissan versa hyundai accent kia rio toyota yaris ia

Toyota, Mazda form electric car technology venture

TOKYO — Toyota has established a new venture to develop electric vehicle technology with partner Mazda, seeking to catch up with rivals in an increasingly frenetic race to produce more battery-powered cars. Policymakers in key markets like China are pushing a shift to electric cars over the next two to three decades, while relatively new rival Tesla is gaining momentum and diesel cars are going through the fallout of the Volkswagen diesel scandal, pressuring traditional automakers to crank up plans for fully electric vehicles (EVs). At the same time, declining battery costs are enabling more power to be packed into cars, making an electric car future easier to imagine. Toyota said in a statement the new company will develop technology for a range of electric cars, including mini vehicles, passenger cars, SUVs and light trucks. Toyota will take a 90 percent stake in the joint venture, called EV Common Architecture Spirit Co Ltd, while Mazda and Denso Corp, Toyota's biggest supplier, will each take 5 percent. The plans build on a partnership announced in August when Japan's biggest automaker agreed to take a 5 percent stake in Mazda and two said they would jointly develop affordable electric vehicle technologies. Although Toyota is providing most of the financial firepower and existing EV know-how, Mazda's engineers have gained the admiration of the industry with breakthrough technologies such as its compression ignition engine announced last month. Shares in Mazda surged to end the day 3 percent higher, while those in Denso rose 1.8 percent. Toyota shares were flat. Both automakers are somewhat behind rivals, with neither having a fully electric passenger car on the market yet. After years of focusing on bringing hydrogen fuel cell vehicles to the market, Toyota last year set up a division to develop electric cars which is led by President Akio Toyoda, and said it plans to introduce EVs in China in the coming years. Toyota has also announced it will bring a game-changing solid-state EV battery to market by 2022. That division would continue as a separate entity from the new joint venture, a Toyota spokeswoman said, while adding that the two teams would co-operate on technology development. Mazda has an R&D budget a fraction of Toyota's, which has made it difficult to develop electric cars on its own. Even so, it has said it plans to launch EVs in 2020.

Which car companies are creating new jobs in America?

Since January, automakers have announced investments totaling $9.5 billion in U.S. plants, creating or retaining more than 12,000 jobs. Some of those companies have yet to announce just how many jobs will be created given their investments, with the location of many of those jobs still to be determined. Specifically, the 4,000-job Toyota-Mazda joint venture plant still hasn't announced its location, with numerous states jockeying for it. Hyundai has plans to invest $1 billion but has not announced a jobs number yet. And likewise Ford is investing $1.2 billion in Michigan without specifying a number of jobs. Volvo this week announced plans to add a second line to its factory under construction in South Carolina, spending another $500 million and adding 2,500 jobs to the 2,000 it was already trying to fill. Then Thursday, Daimler announced a $1 billion expansion to its facility in Tuscaloosa, Ala., to produce EV batteries and electric SUVs, a move that will add 600 jobs to its hiring this year. Above, we've created a handy pie chart showing you which companies have announced new jobs and how many there will be. Reporting by Paul Lienert in Detroit News Source: Reuters Plants/Manufacturing BMW Chrysler Ford GM Honda Hyundai Mazda Mercedes-Benz Toyota Volvo jobs

IIHS gives good ratings to 4 of 8 midsize pickups in crash test

Versions of the Toyota Tacoma, Chevrolet Colorado and GMC Canyon Crew Cab earned top ratings in a new crash test of midsize pickup trucks from the Insurance Institute for Highway Safety, while two versions of the Nissan Frontier earned marginal ratings. But the organization gave poor marks to all eight pickups tested for their dim headlights. Overall, four of the eight pickups evaluated earned good ratings for protecting occupants in all five crash test categories — the Tacoma double cab along with crew cab versions of the Colorado, Canyon and Tacoma. But the poor headlights and lack of an automatic emergency braking system blocked any of the pickups from qualifying for the IIHS's Top Safety Pick awards. The study looked at two pickup body styles using 2017 models: crew cabs, which have four full doors and two full rows of seating, and extended cabs, which have two full front doors, two smaller rear doors and compact second-row seats. It subjected each to five tests, and it evaluated the performance of front crash prevention systems and headlights. The Toyota Tacoma crew cab was the only pickup in that class that earned a good rating for structure in the small overlap test, which replicates what happens when a vehicle clips a tree, pole or another vehicle that has crossed the center line. The model's Access Cab extended-cab version was rated similarly, though its structure was rated acceptable. "This group of small pickups performed better in the small overlap front test than many of their larger pickup cousins," says David Zuby, the Institute's executive vice president and chief research officer. "The exception was the Nissan Frontier, which hasn't had a structural redesign since the 2005 model year." The extended-cab versions of the Chevy Colorado and GMC Canyon earned acceptable ratings, while both the Nissan Frontier king-cab and crew-cab models were rated marginal. Toyota says its 2018 Tacoma will feature upgraded headlights and a standard autobraking system that can detect pedestrians. "Headlights are basic but vital safety equipment. Drivers shouldn't have to give up the ability to see the road at night when they choose a small pickup," Zuby said. Related Video: Auto News Chevrolet GMC Nissan Toyota Safety Truck Videos gmc canyon nissan frontier chevrolet colorado

Mixed sales results, but automaker stocks rise on need for cars in Houston

DETROIT — The Big Three Detroit automakers on Friday reported better-than-expected August sales and issued optimistic outlooks for demand as residents of the Houston area replace flood-damaged cars and trucks after Hurricane Harvey, sending their stocks higher. General Motors, Ford and Fiat Chrysler posted mixed August U.S. sales, with GM up 7.5 percent and Ford and Fiat Chrysler down. Japanese automaker Toyota improved sales by nearly 7 percent, while Honda fell 2.4 percent. Still, analysts focused on the potential for Detroit automakers to cut inventories and stabilize used vehicle prices as residents of Houston, the fourth largest city in the United States, are forced to replace tens of thousands, perhaps hundreds of thousands, of vehicles after the devastation from Hurricane Harvey. Mark LaNeve, Ford's U.S. sales chief, told analysts on Friday that following Hurricane Katrina in 2005 "we saw a very dramatic snapback" in demand. That said, Ford sales fell 2.1 percent in August. It sold 209,897 vehicles in the United States, compared with 214,482 a year earlier. Sales were down 1.9 percent in the Ford division and off 5.8 percent at Lincoln. Demand was down for cars, crossovers and SUVs. It was not clear how many vehicles in the Houston area will be scrapped, LaNeve said, saying he had seen estimates ranging from 200,000 to 400,000 to 1 million. Ford's Houston dealers may have lost fewer than 5,000 vehicles in inventory, he said. Ford is the No. 1 automaker in the Houston market, with 18 percent share, according to IHS Markit. The company plans to ship used vehicles to Houston dealers and has "every indication we would have to add some production" of new vehicles to meet demand, LaNeve said. Investor concerns about inventories of unsold vehicles and falling used car prices have weighed on Detroit automakers' shares most of this year. Now, automakers can anticipate a jolt of demand from a big market that is a stronghold for Detroit brand trucks and SUVs. "It's got to be a positive for the industry," LaNeve said. Investors appeared to agree. GM shares rose as much as 3.3 percent to their highest since early March. Ford increased 2.8 percent at $11.34, and Fiat Chrysler's U.S.-traded shares were up 5.2 percent $15.91, hitting their highest in more than five years. GM reported a 7.5 percent increase in U.S. auto sales in August, helped by robust sales of crossovers across its four brands.

J.D. Power study identifies top seats for your tush

File under News your fanny can use: The seating systems in the Ford Escape and Edge, the Audi A3, Chevrolet Cruze, Kia Cadenza, Porsche Cayenne and Toyota Tundra received top marks in a new J.D. Power study on seating and seat belt quality and satisfaction. The J.D. Power 2017 Seat Quality and Satisfaction Study asked more than 77,000 new owners and lessees of 2017 model-year cars and light trucks to rate their vehicle's seats and seat belts within the first 90 days of taking ownership. The survey is broken up into seven vehicle segments and scored on total seat problems per 100 within each segment, with awards presented to the seating system supplier. Canadian auto supplier Magna won three of seven first-place awards for its seating systems in the A3, Escape and Edge. Ireland-based Adient got top marks for its seats in the Cadenza and Cayenne. Lear Corp. won for the Cruze, and Avanzar Interior Technologies scored highest for seats in the Tundra. J.D. Power says its study is intended for automakers and suppliers with quality and satisfaction information to be used in developing and marketing seating systems. "But the results are just as interesting to a consumer audience," the company says. "After all, some drivers spend a considerable amount of time behind the wheel, and it's helpful to know which vehicles offer the most comfortable seats for those long commutes." Ain't that the truth. Ford was the only automaker whose seat systems, both manufactured by Magna, received top honors in two segments: the Escape for mass-market compact SUV and the Edge for mass-market midsize/large SUV. J.D. Power says it used 22 attributes to measure seat quality, three measures of seat belt quality and 12 to measure satisfaction. Awards were presented to the seating suppliers. Related Video: Image Credit: Audi Auto News Design/Style Audi Chevrolet Ford Kia Porsche Toyota Safety JD Power seats

2017 Toyota 86 Drivers' Notes | Fun, even with an automatic

The Toyota 86 is a car that enthusiasts begged Toyota to build for decades. It's small, lightweight and rear-wheel drive. Thanks to a partnership with Subaru that resulted in the BRZ, this stylish coupe hit the streets in 2012. In the U.S., the car was originally known as the Scion FR-S but was rebadged as a Toyota after Scion was axed last year. Along with a new name, the 86 received updated styling both inside and out as well as a revised suspension and a slight bump in power, at least for the manual models. This Hot Lava-colored car doesn't feature Toyota's slick six-speed manual. Instead it rocks a six-speed automatic with paddle shifters. While some enthusiasts may look down at that, automatics make up more than half of 86 sales. Still, the bones are there, and some people don't think the automatic is all that bad. Either way, we can't encourage enough people to buy these cars, as we want Toyota and Subaru to keep building them. Senior Editor, Green, John Beltz Snyder: When I first slid behind the wheel of the 86, I was surprised to see the gear selector and paddles. It's one of those cars that you don't think of as having anything but a manual transmission. Also, in an interior where all the controls and displays are underwhelming, a set of paddle shifters stands out as one of the few tactile objects in the cabin. I ended up using the paddles quite a bit, and found that I actually enjoyed using them, so much so that I'd actually consider opting for the automatic transmission were I to buy an 86. Despite shifts that aren't as razor sharp as they could be, the car's high-revving engine means that it still feels great to use. Riding an engine like this up to its redline, filling the cabin with noise, is the sort of thing that'll give you goosebumps. Being able to keep both hands on the wheel while shifting is a good thing for engagement in this car, based on my time with it. Plus, when I got stuck in traffic, I didn't have to wear out my left leg. The other brilliant thing about the Toyota 86 is its sense of balance. I loved the way it communicated its load distribution when cornering, whether on or off the throttle or brake. The fact that the nose of this car snaps right to where you want it when you start dialing in steering angle is satisfying. And its low stance and good view out the windshield make it really easy to place on the road.

At least 15 states jockeying for Toyota and Mazda factory jobs

Just a few weeks ago, Mazda and Toyota announced a partnership that would lead to an all-new $1.6 billion plant here in the United States. The plant will build EVs and is expected to employ roughly 4,000 people directly while creating thousands of indirect jobs through suppliers, shipping and more. The Detroit Free Press reports that as many as 15 Midwestern and Southern states are understandably interested in striking a deal with the automakers. Most of the states already have ties to the auto industry. While the Midwest has traditionally been home to auto manufacturing in the United States, in the past 25 years or so, the South has made a big push, offering tax incentives and a union-free workforce. Alabama alone is home to facilities from Honda, Hyundai, Mercedes-Benz and Toyota. Others house a burgeoning tech or manufacturing industry ripe for the picking. Freep breaks down the pros and cons for each state, with much of the focus being on supply chains and a reliable and plentiful workforce. The latter is of particular concern in states like Alabama and Michigan that already have a big auto industry. Toyota may feel those areas have already been tapped for talent. Most of the states are along or adjacent to Interstate 75 and its extended roots, so others like Texas and Iowa will have to fight hard if they want this facility. It's only been a few weeks, though. With manufacturing jobs in such great demand and elected officials eager to show they're seeking them for their states, it wouldn't be surprising if a few more joined the fray. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Detroit Free Press Green Plants/Manufacturing Mazda Toyota

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.