2009 Toyota Tacoma Crew Cab Pickup 4-door 4.0l V6 4x4 Sr5 Truck on 2040-cars

Auto blog

Toyota C-HR stays sharp from prototype to production

Scion is dead. While the troubled brand was given 13 years to make a case for itself, it never quite succeeded. And that's a shame, because we're pretty confident that this, the production-spec Toyota C-HR would have been one of its biggest hits. Instead, when it arrives in the US, it will be as a Toyota... where it will still likely be a big hit. The new small CUV made its debut after literally years of teasing concepts, the most recent of which was shown late last year in Los Angeles, where it was badged as a Scion. After seeing that car, it's quite clear that Toyota has strained itself to translate its style to the real world. Up front, there's clear inspiration from the Toyota Auris/Scion iM. But aside from the front, the C-HR's biggest inspiration appears to be the Nissan Juke. View 14 Photos It's like Toyota has tried to go even further, though. Its wheel arches are flared even more aggressively and they feed into a strong character line on the lower portion of the doors. In back, Toyota's designers seem to have just rotated the Juke's taillights 180 degrees while they sit below an extremely fast rear window. Said window is integrated into today's latest design trend, a floating roof. Mechanically, the C-HR rides atop Toyota's New Global Architecture, which is Japan's answer to Volkswagen's MQB architecture. Power comes from a hybrid drivetrain, good for a relaxed 120 horsepower. If you don't want hybrid power, Toyota will sell the C-HR with the Euro-market Auris' turbo 1.2-liter engine, but we almost certainly won't see that here in the US. Instead, American drivers will probably be left with nothing but a 2.0-liter, naturally aspirated four-cylinder. That engine will be exclusively paired with a continuously variable transmission that sends power to either the front- or to all four wheels. So there's Juke inspiration, but not in the driving character. Toyota says it will build the C-HR Hybrid in Turkey. We don't know if that facility will handle US-market vehicles or just Europe, but we wouldn't be surprised to see additional facilities come online to produce this stylish little bugger. Related Video: TOYOTA C-HR Toyota's Fresh New Take on the Crossover 2016 Toyota Motorshow Geneva Making its world debut at the 2016 Geneva motor show, the C-HR gives Toyota a powerful new presence in the crossover market.

Toyota recalling small number of 2014 FJ Cruisers for possible steering failure

Toyota is issuing a fairly tiny recall to fix a potentially serious problem in the FJ Cruiser. The company is recalling about 120 examples of the rugged SUV from the 2014 model year because the steering can fail. According to Toyota, the intermediate shaft that connects the steering wheel and steering gear box might not be welded correctly and can separate. If this happens, drivers lose steering control, which is obviously a major safety concern. However, the automaker is not aware of any crashes, injuries or fatalities from the problem. On the small number of affected models, Toyota will replace the intermediate shaft with a new one. TOYOTA RECALLS CERTAIN 2014 MODEL YEAR FJ CRUISER VEHICLES TORRANCE, Calif., February 5, 2015 – Toyota Motor Sales, U.S.A., Inc., today announced it will conduct a safety recall of approximately 120 Model Year 2014 FJ Cruiser vehicles. The steering system contains an intermediate shaft, which connects the steering wheel to the steering gear box. In the involved vehicles the intermediate shaft could have received an inadequate weld. Under some circumstances, the weld could separate, resulting in the loss of steering control and increasing the risk of a crash. Toyota is not aware of any crashes, injuries, or fatalities caused by this condition. Owners of the involved vehicles will receive a notification by first class mail. Toyota dealers will replace the intermediate shaft. Detailed information is available at www.toyota.com/recall and by calling Toyota Customer Service at 1-800-331-4331.

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.