Beautiful Clean Camry, No Wrecks, Excellent Condition on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Oh Buoy! Toyota sinks to Spongebob depths with custom Highlander

The launch of the 2014 Toyota Highlander is being assisted by Bikini Bottom's number one resident, SpongeBob SquarePants. The new crossover has been wrapped with SpongeBob's square mug all over it as if he's saying "I'm ready. I'm ready. I'm ready. I'm ready," from every direction. Inside is a cabin that Toyota says "captures all of the beloved character's high-octane energy," but might make you question whether this is really the world you want to live in.
Revealed on SpongeBob Day at the San Diego Padres vs. San Francisco Giants baseball game in San Diego, CA on July 13, the Highlander will go from there to seven locations nationwide on a "Happy Driving Tour," ending at the LA Auto Show in November.
You can read all about it in the press release below, as well as ways to fill your life with more SpongeBob than is probably healthy.

TMG's super Lexus LS Sports 650 gets track tested

The people at Toyota Motorsport GmbH have been responsible for the Japanese automaker's motorsports efforts since the 1970s, but since Toyota pulled out of Formula One after the 2009 season, the tuning shop has been developing a super sedan based on the Lexus LS called the Sports 650. Details on TMG's first road car have been scarce, but XCAR was recently invited to drive the 641-horsepower Lexus on track.
Here's what we know: the Sports 650 has enough power to sprint to 60 miles per hour in under four seconds, tops out at 199 mph, weighs over two tons and utilizes LFA brakes. Oh, and its twin-turbo V8 bellows like an AMG V8. That last part isn't surprising when considering TMG could become Toyota's in-house tuning arm - like AMG is to Mercedes-Benz. As for the bespoke body kit, fender flares and stacked exhaust pipes? They fit the car well and even remind us a bit of Lexus' other high-performance sedan, the IS F. Currently there are no plans for the Sports 650 to be made into a production car, but we doubt TMG is devoting this much effort developing the LS into a road-rocket for nothing.
Check out XCAR's video below to see the AMG-fighter wrung out on track, and then ponder what could be if TMG were let loose to fiddle with other cars in Lexus' lineup. Now that's something we could get used to!