2024 Ram 3500 Tradesman on 2040-cars

Auto blog

FCA recalls 2 million Ram trucks over airbag issues

Airbag issues have prompted Fiat Chrysler Automobiles to issue another pair of recalls. The two separate issues both affect Ram pickups, one campaign stemming from oversensitive sensors, the other from a wiring harness. Between them, the problems affect an estimated combined total of some 2 million units. The first recall affects 2013-15 Ram 1500, 2500, and 3500 trucks, specifically four-door models, manufactured between June 20, 2012, and January 26, 2015. The calibration of the side impact sensor in those affected units may to be too sensitive. As a result, if the door is slammed too hard, the side-curtain airbag and seatbelt pre-tensioner may inadvertently activate. FCA reports that this issue affects an estimated 667,406 units in the United States, plus 153,011 in Canada, a further 8,272 in Mexico, and another 14,847 in markets outside of North America, amounting (in Chrysler's estimation) to less than 0.005 percent of those vehicles produced. The automaker says it is aware of two minor injuries (but no accidents) that may have resulted from the glitch, and is taking action to have the Occupant Restraint Control module recalibrated in the affected units. The second issue also affects Ram pickups, including 1500, 2500, 3500, 4500, and 5500-series models from the 2012 to 2014 model years, built between January 18, 2011, and October 7, 2014, and fitted with the optional Electronic Vehicle Information Center. The problem here stems from a wiring harness in the steering wheel that may rub against a retainer spring in the air bag control module, which in turn could cause an electrical short and deploy the driver's side air bag unexpectedly. In the United States alone, the issue is estimated to affect 1,060,531 units, which will need to be inspected and, where necessary, have their steering wheel wiring harnesses secured, with protective caps added to the ends of the airbag retainer spring. These do not represent the first issues we've seen from Fiat Chrysler in recent days. The automaker recently issued a recall for approximately 1.4 million vehicles to have their Uconnect software updated to prevent hacking. A few days ago it also announced a recall for 350,000 Dodge Journey (and Fiat Freemont) crossovers to secure loose engine covers. And the National Highway Traffic Safety Administration is expected to issue Fiat Chrysler Automobiles a $105-million fine for mishandling other recent recalls and safety issues.

Ram partners with Lucchese on a range of luxury boots

A few months ago, Ram announced a partnership with Michigan-based Wolverine boots on a range of work boots based on the Ram 1500 Tradesman, Rebel, and Limited trims. The number two full-size truckmaker so far this year in sales isn't finished with footwear, Ram announcing a range of dress boots in collaboration with Texas-based boot company Lucchese. There are five styles in total, three for men, two for women. Since these Western-themed cowboy specials are based on the $58,565 10th Anniversary Limited Longhorn Edition, which lives at the opposite end of the trim range to Tradesman, the Lucchese models can cost more than 10 times the Wolverines. Whereas the entry-level Wolverine Tradesman cost $229, the top-dog Lucchese men's Tooled Western Boot runs $2,495. That money gets luxury features and Lucchese's hand-worked processes that pass each boot through as many as 120 pairs of hands on the way to being finished. That $2,495 boot is made with a hand-tooled quarter, which is the shaft of the boot that runs up the leg above the ankle, and a giant gator vamp, the vamp being the lower portion of the boot that covers the foot. The men’s Caiman Horseman Boot includes a hand-cut inlay quarter and giant belly caiman vamp for $995. The menÂ’s Ostrich Horseman model wears a fancy stitch quarter and hand stained ostrich vamp for $745. The women's Giant Gator Western Boot is made with an inlayed quarter and a giant gator vamp for $1,395. The final model, the women's Horseman Boot, gets a side seam quarter and inlay with a goatskin vamp for $695. Each boot is also emblazoned with some kind of automaker logo which can include the word "Ram" or "Longhorn," or the Ram bighorn sheep logo. And if a Ram owner needs to get even more on-brand where the leather meets the ground, Ram sells a three-pack of branded socks for $25. Ryan Nagode, chief designer for Ram interiors, said this partnership can be traced back to a visit to Texas with his design team more than a decade ago. The group noted the creativity and attention to detail on the wares at boot and saddle shops, aspects that would increasingly make their way into Ram interiors as trucks got more luxurious from top to bottom. Closing the circle, Lucchese boot designer Trey Gilmore strove to re-create certain aspects of the 10th Anniversary Longhorn truck, like the Mountain Brown leather interior. The boots are available for pre-order now at the Lucchese site.

2020 Ram 1500 Laramie Southwest Edition is a true-blue Texas truck

American pickup builders love celebrating the Southwest, and Ram is taking its latest stab at the "Texans love trucks" trope with the 2020 Ram 1500 Laramie Southwest Edition.  This is essentially an appearance and popular equipment package. Outside, the truck gets a body-colored grille surround, bumpers and mirror caps. A restrained smattering of chrome accents rounds out the look, adding a touch of class without getting too glare-heavy.  Inside, it's essentially a Laramie. Standard equipment includes a 12-inch touchscreen with the latest Uconnect infotainment suite, a panoramic sunroof, remote tailgate release, rain-sensing wipers and an electric trailer brake controller.  “For nearly 20 years, Ram has recognized that Texas and AmericaÂ’s Southwest are the center of the truck universe,” said Mike Koval, Ad Interim Head of Ram Brand, FCA - North America. “Ram was the first manufacturer to offer a Texas-exclusive model, and the Lone Star edition remains our most popular truck in Texas. Our new Ram Laramie Southwest Edition adds the segmentÂ’s best combination of performance, capability, luxury and technology.” Ram says the Southwest Edition can be had with any of the Laramie's existing powertrain configurations, in both Quad- and Crew Cab bodies, and with both the 5'7" and 6'4" bed lengths. The starting price is $47,075 including destination.  The 2020 Ram 1500 Laramie Southwest Edition is a "Texas Edition" by another name, and will be sold exclusively in the Lone Star State and its immediate neighbors. Look for the first models to arrive in dealers in the coming months, as FCA will put it into production in the second quarter.  Featured Gallery 2020 Ram 1500 Laramie Southwest Edition RAM Truck