2009 Porsche Cayenne Turbo S Sport Utility 4-door 4.8l on 2040-cars

Auto blog

Porsche announces Cayman GT4 with 911 GT3 components

For years, there's been a debate among Porsche fans about which of its products is a better sports car, the 911 or the Cayman. It would only take a few sentences before those in the Cayman corner said that Porsche wouldn't make the Cayman as good as it could be for fear of overshadowing The Number One Son. We have a feeling these conversations are going to get a lot livelier with the introduction of the Cayman GT4, which pilfers lightly from the 911 Carrera S and heavily from the 911 GT3. On the outside, you can look to its front fascia, wheels, and fixed rear wing, and 30-millimmeter lower ride height for GT3 inspirations. Underneath, there's a 385-horsepower, 3.8-liter flat-six engine amidships, credited as being derived from the Carrera S. While there are those out there still lamenting the fact that the GT3 can only be had with a dual-clutch transmission, the Cayman GT4 "transmits its power solely through a six-speed manual transmission with dynamic gearbox mounts." Yeah. So take that. The extra power reduces the Cayman GT4's 0-to-60 mile per hour sprint to 4.2 seconds, a half second quicker than the 340-hp Cayman GTS, and bumps top speed up to 183 mph. An interesting nugget: Porsche says the Cayman GT4 runs the Nurburgring in seven minutes and 40 seconds, which it credits as the same time run by the 2011 911 GT3. Porsche has never offered a precise time for the current 911 GT3, saying only that it's "under 7:30," and Internet rumor (grab your salt lick) is that the not-yet-introduced GT3 RS has done a 7:20. We don't have all of its details yet – those will come closer to its introduction at the Geneva Motor Show next month – but we're told of a lot more 911 GT3 parts underneath, like the chassis that "consists almost entirely of components from the 911 GT3" and that all of its "technical aspects are based on the 911 GT3." If you want to take it further, the options sheet will include ceramic brakes and carbon fiber bucket seats. This new top-shelf Cayman gets to dealerships in the US in July with a starting price of $84,600 before a $995 destination charge. You'll find a few more bits of info in the press release below. A New Member of Porsche's GT Family The benchmark in its class: the Porsche Cayman GT4 Atlanta, Feb. 3, 2015 - Porsche's GT family is proud to announce the addition of an exciting new member: the Cayman GT4. This is the first Porsche GT sports car based on the Cayman and features components of the 911 GT3.

Porsche recalls new 911 models over exhaust pipe issues

Porsche, though the National Highway Traffic Safety Administration, announced a voluntary recall on about 2,200 911 Carrera and Carrera 4 models built during the 2012 and 2013 model years. On cars equipped with the standard exhaust system it was found that the tailpipes could separate from the mufflers and become dangerous road debris; models that added the optional sport exhaust system are not included in this recall.
Affected vehicles were built between March and November of last year, but there have been no reports of the problem on any customer-owned vehicles. Porsche first noticed a cracked tailpipe weld on a test vehicle back in May, and since then has found similar problems on other internally owned vehicles, all with more than 25,000 miles on the clock. To fix the problem, dealers will be replacing the mufflers. Scroll down to read the official notice.

Jay Leno puts carbon fiber wheels to the test on a Porsche 911 GT3 RS

Jay Leno's Garage usually focuses on looking at cars new and old, speaking to their owners and then Jay taking a drive to see what he thinks. However, Leno throws his usual shtick to the curb this week to do a full product test of the carbon fiber wheels from a company called Carbon Revolution. If you're not interested in hearing about wheels for 18 minutes, don't worry. They get mounted on a Porsche and are tested back-to-back with stock wheels, and Leno takes the 911 for a track test, too.
While carbon-fiber wheels aren't exactly a new idea, Carbon Revolution's goal is to create a lightweight, one-piece product that can be mass produced. The company even claims that it already has a deal with an OEM automaker to offer them on a vehicle in a few years. The key to the technology is that it doesn't need an expensive autoclave to be made.
In the meantime, the company's carbon fiber wheels are available as an aftermarket option for about $15,000 a set, according to the video. They weigh in at about 15.5 pounds each and offer OEM-levels of stiffness, so they could cut some unsprung mass off of a performance car. Watch here as Jay and his mechanic Bernard lap Willow Springs and give their feedback about what they think of this cutting-edge technology.