Salvage Title on 2040-cars

Auto blog

GM Recalls 1.5 Million Cars For Steering Defect

General Motors Co. said Monday it is recalling 1.5 million vehicles worldwide because the electronic power-steering assist can suddenly stop working, making them harder to steer. The new recall brings to 6.3 million the number of vehicles GM has recalled since February. The initial recall - now at 2.6 million small cars for an ignition switch defect - prompted the automaker to name a new safety chief and speed up the review of cases that might lead to recalls. GM said it expects recall-related costs to total $750 million in the first quarter, including $300 million for the ignition switch recall. Included in the new recall are: - Chevrolet Malibu from the 2004-2005 model years, plus some 2006, 2008 and 2009 model-year cars. - Chevrolet Malibu Maxx from the 2004-2005 model years, plus some 2006 model-year cars. - Chevrolet HHR from the 2009-2010 model years (non-turbocharged only). - Some Chevrolet Cobalts from the 2010 model year. - Some Saturn Auras from the 2008-2009 model years. - Saturn Ion from the 2004-2007 model years. - Pontiac G6 from the 2005 model year, plus some cars from the 2006, 2008 and 2009 model years. - Service parts installed into certain vehicles before May 31, 2010, under a previous recall GM says no deaths related to the defect have been reported. It is still investigating whether there have been any accidents or injuries related to the problem. GM dealers will replace the power steering motor and other parts for free. Spokesman Alan Adler said owners will be notified of the recall the week of April 28 and will be told when parts are available after that. The Cobalt and the Ion, which are also involved in the ignition switch recall, share many common parts.GM recalled Cobalts from the 2005-2010 model years for the power steering defect in 2010, but it's unclear why the company didn't recall the Ion at the same time. Federal regulators also opened an investigation into power steering complaints in the Ion in 2010, but didn't order a recall. Related Gallery 2014 Chevrolet Corvette Stingray Test Drive View 9 Photos Recalls GM Pontiac Chevy Cobalt saturn ion pontiac g6 Chevrolet Cobalt Chevrolet HHR

Junkyard Gem: 1997 Pontiac Sunfire SE Convertible

For the entire 24-year production run of the GM J platform (best known for the Chevrolet Cavalier), the Pontiac Division offered new J-Body cars for sale in the United States. First there was the J2000, followed in quick succession by the 2000, 2000 Sunbird and Sunbird. The Sunbird stuck around until the Cavalier got a major redesign for the 1995 model year, at which point Pontiac changed the car's name to Sunfire. Today's Junkyard Gem is one of those early Sunfires, a top-of-the-line SE convertible with the optional big engine and manual transmission. The Sunfire was an extremely close sibling to the same-year Cavalier (by the late 1980s, all the other US-market GM divisions had dropped their J-cars, which meant no more Skyhawks, Cimarrons or Firenzas), quite difficult to distinguish from its near-twin at a glance. The base engine for the 1997 Sunfire convertible was the pushrod 2.2-liter straight-four that powered so many J-bodies of the 1990s. That engine produced just 120 gnashing, valve-floating horsepower, not much by late-1990s standards. For a mere 450 additional dollars, however, the 2.4-liter Twin Cam engine and its high-revving 150 horses could be had by '97 Sunfire buyers. That's what's in this car. This is one of the members of the Oldsmobile Quad 4 family, though some fanatics will yell at you if you apply that name to the versions that don't have big QUAD 4 lettering cast into the valve cover. This is the most powerful engine ever used in production Sunfires. For 1997, Pontiac offered a four-speed automatic transmission for no extra cost in the Sunfire convertible. Buyers of all other Sunfire models that year had to shell out either $550 or $810 ($1,026 or $1,511 in 2023 dollars) for a two-pedal rig. That means that the buyer of this car really wanted the five-speed manual transmission (or just hungered for the $810 credit offered in the fine print for takers of the manual). Plenty of free-breathing engine power, five-on-the-floor driving enjoyment and the open skies above. What a fun car! This one made it to nearly 180,000 miles. For this car with the Quad 4 under the hood and a clutch pedal on the floor, the MSRP was $18,539 (about $34,584 today). Its Cavalier LS convertible twin with the same engine/transmission setup cost $17,365 ($32,394 now). This car has a bunch of options, including the 15" Rally aluminum wheels, so the out-the-door price would have been higher. The last year for the Sunfire was 2005, same as the Cavalier.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...