1961 Pontiac Catalina Sedan; 4 Door on 2040-cars

Auto blog

Classic Pontiac Trans Am Firebird Super Duty 455 sells for nearly $90,000

Historically, the Pontiac Firebird Trans Am raised the performance levels a notch or two over a plain Firebird in the muscle car hierarchy of the Sixties. But the Super Duty 455 version of the Trans Am — that number represents the cubic inches of the hand-assembled V8 engine — moved the performance needle big time in 1974. So much so that a clean example of the machine sold recently on the Hagerty Marketplace auction site for $89,296. Advertised with just under 54,000 miles on the clock and having undergone a thorough restoration, the Buccaneer Red model was one of just 943 Pontiac Firebirds equipped with the Super Duty 455 package for the 1974 model year. That build had also been offered in 1973. The Hagerty listing drew more than 21,000 views and 39 bids. According to Hagerty's valuation report, a similar car would be worth $85,700 in good condition, and $103,000 if it was in ‘“concours condition.” The Super Duty motor borrowed technology from the lineÂ’s 366-cubic-inch NASCAR engine, and featured heavy-duty connecting rods and an entirely new block with a revised crankshaft and heads to deliver a claimed 310 horsepower. The Firebird that sold was indeed loaded, with a three-speed Hydra-matic transmission (which surely reduced its overall value), power locks and windows, AC, dual exhausts, heavy duty stabilizer bars all around, and a “custom Interior trimmed in Red perforated Morrokide vinyl upholstery.” The entry of PontiacÂ’s pony car in the U.S., facing off against the Mustang and Camaro, dates back to 1967, when it was offered with an inline six and optional V8. The first Trans Ams were introduced two years later, the name derived from a handling package. General Motors ceased production of new Pontiacs in 2002 owing to declining sales and losing stakes in the sports coupe market. The big 455-cid V-8 had disappeared years earlier.

2008-2009 Pontiac G8 recalled over airbag concern

General Motors is recalling around 38,000 Pontiac G8 sedans from its 2008 and 2009 model years. The National Highway Traffic Safety Administration reports that the cars may have a passenger-side airbag flaw that might prevent proper deployment in certain scenarios.
According to NHTSA, the airbag might not adequately protect a fifth percentile woman - that is, a woman around four-foot, 11-inches weighing 108 pounds. The New York Times indicates that the anomaly was found during a crash test conducted by GM's Australian branch, Holden, which was testing the G8's twin (read: Commodore) for head injuries. According to that report, the test in question is specifically tailored to simulate injuries to females, so the results do not apply to men or children.
The issue has been blamed on a seat position sensor that governs airbag deployment rates. NHTSA indicates that when the front passenger seat is moved all the way forward, the faulty sensor may inappropriately trigger a 30-millisecond delay between airbag stages, potentially leading to greater injuries.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...