Find or Sell Used Cars, Trucks, and SUVs in USA

2009 Pontiac G8 Gxp- Excellent Condition, Very Fast Car on 2040-cars

US $33,500.00
Year:2009 Mileage:16500 Color: Black /
 Black
Location:

Salisbury, Vermont, United States

Salisbury, Vermont, United States
Advertising:
Transmission:Manual
Body Type:Sedan
Vehicle Title:Clear
Engine:6.2L 376Cu. In. V8 GAS OHV Naturally Aspirated
Fuel Type:Gasoline
For Sale By:Private Seller
VIN: 6G2EP57W79L320749 Year: 2009
Make: Pontiac
Model: G8
Trim: GXP Sedan 4-Door
Options: Tinted Windows, Sunroof, Leather Seats, CD Player
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag, Side Airbags
Drive Type: RWD
Power Options: heated seats, Air Conditioning, Cruise Control, Power Locks, Power Windows, Power Seats
Mileage: 16,500
Sub Model: GXP
Exterior Color: Black
Disability Equipped: No
Interior Color: Black
Number of Doors: 4
Number of Cylinders: 8
Warranty: Vehicle has an existing warranty
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

Loaded 2009 Pontiac G8 GXP for sale! This car is in excellent condition with no dents or dings. It has had one owner and been fully maintained. It's never been driven in snow. This car has 415 horse power, leather heated seats, tinted windows and much more! There is only 1800 of these cars ever built, and 450 with manual transmission. Vehicle has a remaining warranty. Asking $33,500. Please call Rusty with any further questions at 802-349-0179 or 802-352-4476

Auto Services in Vermont

Subaru of Keene ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 14 Production Ave, Peru
Phone: (802) 529-4148

Jas Auto Body ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Used Car Dealers
Address: 1193 Route 14, West-Hartford
Phone: (802) 296-2500

Shearer Auto Body ★★★★

Automobile Body Repairing & Painting, Automobile Restoration-Antique & Classic, Truck Body Repair & Painting
Address: 1030 Shelburne Rd, Shelburne
Phone: (866) 595-6470

Monro Muffler Brake & Service ★★★★

Auto Repair & Service, Brake Repair, Mufflers & Exhaust Systems
Address: Averill
Phone: (866) 595-6470

Danyow Gregory ★★★★

Auto Repair & Service
Address: 2 Perkins Rd, Mendon
Phone: (866) 595-6470

Ayer Auto Body ★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Towing
Address: 34 Maple Ave, Riverton
Phone: (802) 476-6977

Auto blog

GM issues four new recalls, 2.4 million cars affected

Tue, 20 May 2014

General Motors has announced another set of recalls, covering some 2.42 million cars in the United States. For those keeping track, The General has now recalled over 15 million cars worldwide this year due to various issues.
Here's the breakdown for this most recent set of recalls:
1,339,355 - Buick Enclave, Chevrolet Traverse, GMC Acadia models from the 2009 to 2014 model years; Saturn Outlook models from the 2009 to 2010 model years

Junkyard Gem: 1992 Pontiac Firebird

Mon, Dec 18 2023

Last spring, this series featured a 1992 Chevrolet Camaro RS in a Northern California junkyard, an example of the final model year for the highly successful third-generation GM F-Body. On a later visit to that yard, I spotted the Pontiac sibling to that car, a Firebird that was born the same year at the same Southern California factory. When the Chevrolet Division introduced the first Camaro as a 1967 model, the Pontiac Division got its own version of the F-Body called the Firebird. While the two cars were built on the same chassis and looked very similar, the first-generation Camaros got Chevrolet engines while their Firebird colleagues got Pontiac engines (including the innovative SOHC straight-six). The 1970-1981 second-generation Firebirds still had some Pontiac-only engines, but Chevrolet and Oldsmobile power crept under some hoods during that period. The third-generation Firebirds first appeared as 1982 models, and they drew from near-identical stockpiles of GM running gear (including the distinctly agricultural Iron Duke four-banger, which could be considered a Pontiac-derived engine). When the Camaro got the axe after 2002, the Firebird's neck was put on the same chopping block. When the Camaro returned for 2010, the Pontiac brand was sputtering to an agonized halt during its final year and there was no chance of the Firebird's return. This car is a fairly ordinary coupe, though it does have the mid-grade 205-horsepower 5.0-liter Chevrolet small-block V8 instead of the base 140-horse 3.1-liter V6. A 5.7-liter small-block was available as well. A five-speed manual transmission was base equipment, but few Americans wanted a three-pedal setup by the early 1990s. This car has the optional four-speed automatic. The MSRP with 5.0 engine, automatic transmission and air conditioning (which this car has) started at $14,304. That's about $31,868 in 2023 dollars. It was built at Van Nuys Assembly in the San Fernando Valley of Los Angeles County. By the dawn of the 1990s, the Camaros and Firebirds made at Van Nuys Assembly had become known as the worst-built GM cars made in North America, and the plant was shut down forever soon after this car was built. Today, a shopping mall lives where the factory once stood. This car managed to drive more than 150,000 miles during its life, so it beat the odds. The thrid-gen F-Body was pretty antiquated by the early 1990s, but the fourth-gen cars handled better and looked up-to-date for the era.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Tue, Oct 31 2017

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...