2009 Pontiac G8 Gt on 2040-cars

Auto blog

Fiero-based Zimmer Quicksilver was objectively terrible, but we'd totally drive it

Now here's something you don't see everyday. It's listed in our classified ads as a 1986 Pontiac Fiero, but as you can see, that description is a bit misleading. In fact, it's a Zimmer Quicksilver, which was indeed built atop the guts of a mid-engine Fiero coupe but was heavily modified by the Zimmer Motorcars Corporation at a facility in Pompano Beach, Florida. And the one you see here actually seems to be a pretty decent deal for a highly unusual car. We're not sure what was a more popular starting point for kit and custom cars in the 1980s and 1990s, but it would have to be either the Fiero or the vintage air-cooled Volkswagen Beetle. Fiero-based machines usually mimicked the design direction of any number of highly desirable Italian stallions, most commonly, we'd guess, the Lamborghini Countach. The Quicksilver is an altogether different animal, with over a foot of extra wheelbase added in front of the A-pillar to make for a dramatic, long and low silhouette that somehow still only has barely enough room for two passengers in its leather- and wood-lined interior. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. A stock 2.8-liter V6 engine from General Motors is mated to a three-speed automatic transmission that sends 140 horsepower and 170 pound-feet of torque to the rear wheels. Period road tests found the 0-60 run took a little over 10 seconds, which is terrible today but wasn't all that bad for the mid '80s. Best we can tell, only around 170 Quicksilvers were made between 1984 and 1988, which are, not coincidentally, the same years that Pontiac produced the Fiero. The 1986 Zimmer Quicksilver you see here is priced at $18,495 and shows well under 30,000 miles on the odometer. There aren't a lot of Zimmer Quicksilvers currently for sale for us to compare, but the ones we did find that had sold within the last few years suggest a little under $20,000 is a reasonable asking price. It could be a fun and offbeat addition to the garage, and if nothing else, you're not likely to see another one at your local car show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Pontiac Aztek rises from the ashes of infamy in Firebird Trans Am guise

What if the Pontiac Aztek, one of the most widely ridiculed vehicles ever built, was reimagined with a little flair from one of the former brand’s more legendary cars? Well, it turns out that someone not only came up with that idea, but followed up on it. And so, we present to you the Pontiac Aztek Firebird Trans Am, uh, trim package? ItÂ’s not real, of course, but it comes from Abimelec Arellano, an Hermosillo, Mexico-based car designer with too much time on his hands who goes by the name Abimelec Design. Arellano redesigned the midsize SUVÂ’s wimpy front fascia to surprising success by simply adding widened fender flares and perhaps modernizing the headlights. He also went all-in embracing the AztekÂ’s abrupt, flattened rear end by removing the rear bumper lip, adding a slightly more aggressive rear spoiler to boot. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Elsewhere, the dominating and cheap-looking gray plastic under-cladding is gone in favor of body-color panels. Arellano also added some probably larger Pontiac Snowflake wheels with gold accents that really make them pop and play well against the signature Firebird decal dominating the hood. Commenters generally fall into one of two buckets. As one put it, “I never thought the Aztek could look this good.” Others implored Arellano to do a version with a T-top. Or as one Autoblog editor put it, “So it turns out the reason the Aztek was a laughingstock failure is that it didnÂ’t come in a Smokey and the Bandit Edition. Somewhere, a dude who got shouted down in a product-planning meeting years ago is vindicated.” Sold between 2001 and 2005, the Aztek arguably reached the pinnacle of its notoriety as the metaphor for the drab, underachieving life of Walter White in AMCÂ’s meth drama, “Breaking Bad.” It came equipped with a 3.4-liter V6 that made 185 horsepower and sent it through a four-speed automatic to the front wheels, with an all-wheel drive version also available. The Aztek may have the last laugh, especially if it gets a screaming chicken. “The fact it was a controversial design and didnÂ’t sell well will make it an object of curiosity from a historical standpoint many years from now,” McKeel Hagerty, president and CEO of classic-car insurer Hagerty Insurance, told Autoblog back in 2016.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...