1969 Mercury Cougar Xr7 351 2v At Ps A/c F/m D/b Nice Driver Beautiful New Seats on 2040-cars

Auto blog

NHTSA advances investigation of Ford Crown Victoria headlights

The National Highway Traffic Safety Administration is opening a preliminary evaluation into reports of suddenly failing headlights on 517,945 examples of the 2003-2005 Ford Crown Victoria and Mercury Grand Marquis. The government started looking into this problem in April when the North Carolina Consumers Council filed a defect petition with the agency. Now, the inquiry has moved to the next step. According to NHTSA's documentation (as a PDF), it examined its own database and worked with Ford to come up with a total of 3,609 complaints of the front lighting control module suddenly failing. When this happens, drivers lose the low-beam headlights, but the high-beams can be used by holding the stalk. Sometimes turning the switch off and on fixes the issue. Additionally, there are 15 allegations of crashes, and one reported shoulder injury. NHTSA's preliminary evaluations "evaluate the scope, frequency, and consequence of the alleged defect" and don't necessarily lead to a recall. NHTSA looked into this problem once before in 2008 and 2009 and decided that a recall wasn't necessary. Ford also extended the warranty on the front lighting control module for these vehicles. INVESTIGATION Subject : Loss of headlights Date Investigation Opened: AUG 10, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15028 Component(s): EXTERIOR LIGHTING All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD CROWN VICTORIA 2003-2005 MERCURY GRAND MARQUIS 2003-2005 Details Manufacturer: Ford Motor Company SUMMARY: After receiving a defect petition (DP15002) concerning the loss of headlights and other exterior lighting in model year (MY) 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles, the Office of Defects Investigation (ODI) analyzed Vehicle Owner Questionnaire (VOQ) complaints received from consumers and identified a total of 605 reports (for all submission dates) alleging headlight failure. The complaints indicate failures of both low beam headlights typically while driving, a defect condition that was evaluated under a prior ODI investigation (PE08066). Most consumer VOQs indicate that the headlights failed suddenly and without warning leaving the driver with no forward lighting, however some report the headlights flickered or dimmed prior to turning off. In some cases drivers were able to turn the headlights back on after a period of time while others reported the headlights would not come back on at all.

Ringbrothers shows off Coyote-powered 1968 Mercury Cougar

We'll openly admit that not every SEMA build is our cup of tea. But this? A tastefully resto-modded 1968 Mercury Cougar with a 460-horsepower Ford Mustang V8? Yeah, this is right in our wheelhouse. Sadly, there was no in-pwerson SEMA show in 2020, so we missed out on gems like this one. SEMA or no SEMA, the aftermarket carries on, and co-owners Jim and Mike Ring of Ringbrothers (get it?) saw no reason to let their time and effort go to waste.  When they're not building wild customs (see: 1,100-horsepower 1972 AMC Javelin AMX) or more subtle showcases (such as this Cougar or their 1971 K5 Chevy Blazer build from 2018), the folks at Ringbrothers crank out factory reproduction parts, whether for old-fashioned restoration or modification purposes. While '60s muscle cars are recurring build subjects for the two, the Cougar was the first of its kind they tackled.  Keeping it in the family, Ringbrothers sourced a Ford 5.0-liter "Coyote" V8 and a 10-Speed Automatic (lifted from an F-150 Raptor, incidentally) for the build. They didn't stop with the driveline, of course. The suspension was overhauled with a little help from DSE and a set of HRE Series C1 C103 Forged 3-Piece wheels were thrown over upgraded brakes.  "We put our heart into each car we build, and this Cougar is no exception," Jim said. "The finished product is mild and classy, yet any enthusiast instantly knows it's not stock. I imagine this is what Mercury designers would have come up with if they were building the Cougar today." "While we couldn't bring the car to the SEMA Show, we hope it can be shown to the public soon," Mike said. "We had never done a Cougar before, so this was a fun build. I love working with new shapes and coming up with new ideas." There's plenty to appreciate about this Cougar apart from the mechanicals, too. The finish is Augusta Green Metallic (courtesy of BASF), which was a factory color in 1968. You may know it by another name: Highland Green. There are a few custom exterior touches, but they're quite subtle and styled to be period-correct. The interior was also restored and updated, and it's where you'll find the only thing we're not fond of: that big, fat truck shifter. Gearbox choices notwithstanding, it's a bit of an eyesore. But considering how gorgeous the rest is, we'll give it a pass.  Related Video:

Junkyard Gem: 1970 Mercury Cougar

The plot of the Mercury Cougar story took a lot of strange twists and turns during its 35 or so years, from ponycar to immense luxobarge to family sedan to station wagon to Integra competitor. Examples of the first Cougar generation are nearly extinct in American wrecking yards, so I was excited to spot this one in Denver. Lest you shed any tears over this car going to the crusher, know that it was suffering from the ravenous teeth of the Rust Monster long before it got here. The 1967-1970 Cougar was based on the Mustang platform of the same era, and so it was a sleeker and quicker cat than its successors. Still, the longer wheelbase, extra equipment and all the cool-looking bodywork added some heft; the 1970 Mustang hardtop with V8 scaled in at 2,923 pounds, while the 1970 Cougar weighed 3,307 pounds. The current Ford Focus would fit just between those two weights. There was also a mid-cycle refresh in that era, with the '67-'68 and '69-'70 having different exterior styling and interiors. The '69 and '70 had different front end styling as well, with the latter re-adopting the vertical grille slats featured on the earlier model years. The '69 has horizontal slats. The drivetrain and just about everything else of value has been shorn from this car, perhaps before it arrived in this yard. In 1970, a bewildering assortment of V8 engines was available in the Cougar, including a Boss 302, two completely different 351s, and a 335-horse Cobra Jet 428. The base engine was a 351 Windsor making 250 gross horsepower. Since car rooftops mostly don't rust, why would someone cut out this one? Sheet metal needed for patching a leaky shed roof, perhaps? This 2005-2006 Denver Nuggets window sticker indicates that the car was on the street (probably) as recently as 11 years ago. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. It's savage. It's cool. It's primitive. It's sleek. It's wild. It's elegant. Password for action in the 70s! Featured Gallery Junked 1970 Mercury Cougar View 18 Photos Auto News Mercury