1997 Mecury Mountaineer on 2040-cars

Auto blog

NHTSA upgrades Ford floor mat unintended acceleration probe

According to a Bloomberg report, the National Highway Traffic Safety Administration has upgraded an investigation into complaints of unintended acceleration lodged against Ford vehicles. The investigation began in June of 2010 when just three complaints had been received and it only concerned the Ford Fusion and Mercury Milan, but this was at a time when the phrase "unintended acceleration" made grown men go pale. With 49 additional complaints received since then, the investigation has been reclassified as an engineering analysis - the last phase before a recall - and it has been expanded to include the Lincoln MKZ, making for a total of "around 480,000" units affected between the three sedans from the 2008 to 2010 model years.
The ostensible cause is that floor mats are trapping the accelerator pedal, but according to a Ford statement at the time, the entrapment is due to owners placing the optional all-weather floor mats, or aftermarket floor mats, on top of the car's standard floor mats. NHTSA has backed up that assessment, pinning the blame on "unsecured or double stacked floor mats."
On the face of it, it would appear that NHTSA has upgraded the status not because of Ford's error, but owner error, and Ford has stated publicly that it is "disappointed" in NHTSA's move. On top of NHTSA still being skittish after that other unintended acceleration debacle, it could be seen to be taking its time investigating all of the variables: it's reported that Ford changed its accelerator pedal design in 2010, a "heel blocker" in the floorpan has been considered a potential culprit in how the floor mats could be trapping the pedal, some drivers have said the floor mats weren't anywhere near the pedal, and according to a report in the LA Times, in "a letter sent by Ford to NHTSA in August 2010, the automaker said it found three injuries and one fatality that 'may have resulted from the alleged defect.'"

Mercury Cougar from Bond film 'On Her Majesty's Secret Service' is up for auction

To a James Bond fan, this is a very cool and important car. This 1969 Mercury Cougar XR7 up for auction by Bonhams was one of three used during the filming of 1969's "On Her Majesty's Secret Service," the one-and-done film starring George Lazenby that's a dark horse favorite among many Bond fans (this one included, there's a Japanese-market 'OHMSS' poster hanging behind me as I type this). However, this was not James Bond's car in the movie. He drove an Aston Martin DBS, including in the film's pre-titles sequence when he follows Tracy di Vicenzo driving her bright red Cougar. She would go on to rescue him with it in Switzerland (hence the skis), sacrificing its pretty red paint and body work in a demolition derby on ice that they use to shake Blofeld's Benz-driving goons. Later, after getting caught in a blizzard, they seek refuge in a barn -- a pivotal scene in the film and one where this particular Cougar was apparently used.  ON HER MAJESTY’S SECRET SERVICE | Ice Car Race However, even without the Bond connection, this Cougar is a very cool car. It was one of only 127 in 1969 to be fitted with the top-of-the-line 428 CobraJet Ram Air V8 rated at 335 horsepower. Tracy had a serious muscle car. Bonham's doesn't seem to have thought to provide a Marti report, but I'm guessing the build of XR7, convertible and a color combo of matching red exterior and interior wasn't exactly a common one. Well, we know there were at least three. With skis and French number plates, too.  As for the '69 Cougar itself, this was the only year it looked like this: it got a new body for '69 that would last two years, but the horizontal grille slats that extended over the headlight doors (so cool!) didn't carry over to 1970. It looked worse, and it could easily be argued that it was only downhill from here for the Cougar.  The auction is set for December 16 and Bonhams is estimating a sale price of between $130,000 and $200,000. That certainly makes sense given the rarity of a CobraJet Cougar, the film connection and the complete restoration undertaken by the man who found it in a classified ad in the late 1980s. He originally just wanted it for the engine until he discovered the Bond connection. I actually saw this very car at the 50th Anniversary "Bond in Motion" exhibit at the Beaulieu Motor Museum in England back in 2013 (pictured below). There's also a model of the thing sitting next to me.

Ringbrothers shows off Coyote-powered 1968 Mercury Cougar

We'll openly admit that not every SEMA build is our cup of tea. But this? A tastefully resto-modded 1968 Mercury Cougar with a 460-horsepower Ford Mustang V8? Yeah, this is right in our wheelhouse. Sadly, there was no in-pwerson SEMA show in 2020, so we missed out on gems like this one. SEMA or no SEMA, the aftermarket carries on, and co-owners Jim and Mike Ring of Ringbrothers (get it?) saw no reason to let their time and effort go to waste.  When they're not building wild customs (see: 1,100-horsepower 1972 AMC Javelin AMX) or more subtle showcases (such as this Cougar or their 1971 K5 Chevy Blazer build from 2018), the folks at Ringbrothers crank out factory reproduction parts, whether for old-fashioned restoration or modification purposes. While '60s muscle cars are recurring build subjects for the two, the Cougar was the first of its kind they tackled.  Keeping it in the family, Ringbrothers sourced a Ford 5.0-liter "Coyote" V8 and a 10-Speed Automatic (lifted from an F-150 Raptor, incidentally) for the build. They didn't stop with the driveline, of course. The suspension was overhauled with a little help from DSE and a set of HRE Series C1 C103 Forged 3-Piece wheels were thrown over upgraded brakes.  "We put our heart into each car we build, and this Cougar is no exception," Jim said. "The finished product is mild and classy, yet any enthusiast instantly knows it's not stock. I imagine this is what Mercury designers would have come up with if they were building the Cougar today." "While we couldn't bring the car to the SEMA Show, we hope it can be shown to the public soon," Mike said. "We had never done a Cougar before, so this was a fun build. I love working with new shapes and coming up with new ideas." There's plenty to appreciate about this Cougar apart from the mechanicals, too. The finish is Augusta Green Metallic (courtesy of BASF), which was a factory color in 1968. You may know it by another name: Highland Green. There are a few custom exterior touches, but they're quite subtle and styled to be period-correct. The interior was also restored and updated, and it's where you'll find the only thing we're not fond of: that big, fat truck shifter. Gearbox choices notwithstanding, it's a bit of an eyesore. But considering how gorgeous the rest is, we'll give it a pass.  Related Video: