2004 Mazda S on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Mazda zooms into SEMA 2016 with lighter MX-5 Speedster and RF Kuro concepts

It's almost time for the 2016 SEMA aftermarket show again, if you haven't guessed already by the steady parade of early looks at various show cars. Mazda's MX-5 creations are generally a highlight for us, unapologetic Miata junkies that we are. This year's cars should be just as exciting as last year's, one being a revision of last year's Speedster concept and the other based on the brand new, sexy RF retractable targa top model. Both SEMA MX-5s were designed and built in-house at Mazda's Irvine design studio. This year's Speedster is somehow even lighter than before. Mazda carved 100 pounds out of it, making it a staggering 350 pounds less than a production soft top model. It's also been repainted in a color called "White Ether", which we're imagining looks something like the "Blue Ether" paintjob on last year's highly reflective Speedster minus the blue tint. Mazda will probably never sell a roofless Miata or anything this lightweight, but maybe it should. It looks like it'd be a blast to drive at a road course. And then there's the RF Kuro concept, the first RF-based SEMA show car, which is shown in the teaser above. It doesn't seem terribly extreme, to be honest. It's wearing a matte charcoal paint, which explains the "Kuro" moniker – kuro means "charcoal" in Japanese. A set of 17-inch RAYS forged wheels and MX-5 Cup suspension, and that's about it. Not to knock it; the RF is a sexy looking thing as it sits, and Cup suspension should make it handle even more like a go-kart. Of course, both concepts will be fully revealed at the show next month in Las Vegas. Stay tuned for a dose of concept Miata hotness.Related Video:

Yes, the Mazda BT-50 pickup is real. No, you can't get one.

Mazda exited America's pickup segment when it deep-sixed the Ford Ranger-based B-Series after the 2009 model year, but it remains committed to the body style overseas. The third-generation BT-50 introduced online wears an unusually stylish design for a global truck, while its interior looks and feels more car-like than before. The BT-50 is based on the Isuzu D-Max, but the familiar shield-shaped grille hides the common DNA well. Horizontal slats and a thick chrome frame create a visual link between the pickup and members of Mazda's line of sedans and crossovers, while stylists gave the rear end more utilitarian-looking lines characterized by vertical lights. The variant depicted in Mazda's images is an upmarket trim built for users who need a rugged daily driver, and more basic versions that feel at home on a construction site will ship will inevitably look a lot cheaper. It measures 208 inches long, 74 inches wide, and 70 inches tall when buyers select the double-cab model and order four-wheel drive. These figures give it a footprint almost identical to the four-door Ranger's. Inside, the BT-50 shares some parts with the D-Max, including its 9.0-inch touchscreen and its HVAC controls. Motorists in global markets are increasingly using pickups as daily drivers, so Mazda chased this trend by adding more technology and safety features to the BT-50. Those willing to climb the trim hierarchy are rewarded with conveniences like an eight-speaker stereo, digital gauges, automatic headlights, parking sensors on both ends, and dual-zone climate control, among other features. Mazda wants to peg its truck a little bit higher than Isuzu's. The only engine detailed by the firm is a 3.0-liter four-cylinder turbodiesel built by Isuzu and tuned to deliver 190 horsepower at 3,600 rpm and 332 pound-feet of torque from 1,600 to 2,600 rpm. Rear-wheel drive and a six-speed manual transmission come standard, and motorists can pay extra for four-wheel drive, a six-speed automatic, or both. It's reasonable to assume a smaller, entry-level turbodiesel will join the range later on. With the 3.0-liter, the BT-50 can haul 2,347 pounds, and its towing capacity checks in at 7,716 pounds. That's more than enough to tow an enclosed trailer, your stripped-out Miata, an extra set of slicks, and a boxful of tools. Making your dreams of Mazda-Mazda towing come true will require moving far overseas, because the Japanese company isn't planning on returning to America's pickup segment.