Mazda CX-9, page #6

Mazda CX-9 Price Analytics

About Mazda CX-9

Auto blog

Mazda MX-5 Miata RF Luggage Test | How big is the trunk?

The Mazda Miata would not be my first choice for a road trip car. Would probably be in the bottom 10, in fact. The interior fits me like a coffin, the seats pinch my back and the amount of passenger legroom is laughable. It's not exactly the most serene car, either.  But hey, there are sadists out there who may want to venture somewhere in it. I work with some of them. So, as they were the ones who requested this, here is the answer to the question: how much luggage fits in the Miata's trunk? Alright, so on paper, the Miata RF has 4.48 cubic-feet of trunk volume. The regular soft top Miata, the one you should absolutely get instead, has 4.59. Does that different matter? Probably not. However, when talking about trunks in this diminutive size range, the shape is the ultimate factor. For instance, the Porsche 911's 4.6-cubic-foot frunk is basically the same as the Miata's, yet it's narrower and deeper. My BMW Z3's trunk is 5 cubic-feet, yet it's wider, longer and much shallower. On paper, they'd seem to be the same, but you can't fit the same items within them.  Usually, I'd now list all the bags I have to test, but dude, in the words of Jay Mohr in "Go" ... This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Go (8/8) Movie CLIP - It's a Miata (1999) HD   Here's what I could fit ...     This bag is 26 inches long, 16 wide, 11 deep and you'd have to check it in at the airport (remember those?!?). It BARELY fit inside the Miata. The ever-so-slightly larger gray version of this bag I have did not fit.   By contrast, it slid very easily into my Z3 and as you can see (below left), the remaining area was far more easily accessed due to the wider trunk opening. However, this bag wouldn't fit at all in the 911's frunk as the space isn't wide or long enough.      Alternatively, shown above, I could stack two carry-on roller bags (one 24L x 15W x 10D, the other 23L x 15W x 10D). This time, the tight fit came from height.    By contrast, these two would fit with room to spare in the deep 911 frunk as Zac Palmer discovered with his similarly sized bags (below left). They also fit in my Z3 (below right), but were side-by-side and just BARELY fit due to the trunk's much shallower depth. Basically, the Z3 was worst here.

Junkyard Gem: 1988 Mazda 323 GTX

Back in early 2007, when the late Davey G. Johnson got me my first job writing for an automotive publication (well, unless you count writing for the Year One catalogs back in the mid-1990s) and I took on this goofy pen name for real, I didn't quite grasp that any readers might be interested in the stuff I saw during my frequent junkyard trips. So, when I took my crappy Nikon Coolpix 2500 to the now-defunct Pick Your Part in Hayward, California, and saw a super-rare Mazda 323 GTX among all the Tercels and Rabbits in the IMPORTS section, I just took a few shots of this interesting car for my own enjoyment. These days, I'll take more than 100 photographs of a junkyard car of such great historical significance, editing them down to the best couple of dozen, but in March of 2007 I got just three of the 323 GTX. Robert Capa had his Magnificent Eleven at D-Day, and I've got the Magnificent Three of the GTX. Here they are. Any Mazda 323 of the immediate post-GLC era is a real junkyard rarity today, but Mazda sold very few of the all-wheel-drive, turbocharged homologation-special 323s over here during the 1988 and 1989 model years. A mere 1,243 of these cars made it to North American streets. Back in 2007, they weren't worth much (in fact, they still aren't incredibly valuable, if we go by Bring a Trailer real-world sale prices), and so this one showed up in El Pulpo's yard. These cars wouldn't be considered particularly fast by 21st-century standards, now that we've had decades of street-legal Mitsubishi Lancer Evos and Subaru WRXs flinging snow and mud around, and they tended to grind their powertrain components into a costly oil-and-metal-shaving slurry. But they were maniacally cool in the late 1980s, and that's enough. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. "Even with the sun and heavy rain, I made it here faster with my car!"

Mazda MX-30 electric car production begins: Will it get the rotary range extender?

Mazda has officially started production of the electric MX-30. For the time being, the small electric car hasn’t been announced for the U.S. yet. Mazda hasnÂ’t declared otherwise, though, so we still have our hopes up. The first MX-30s are rolling off the line in Hiroshima, Japan. Europe will be one of the first places where these MX-30s end up. The car starts at GBP30,495 in the UK and ˆ33,990 in Germany. That's around $38,000. Certainly expensive, but the price would surely be different here, plus weÂ’d be eligible for the full $7,500 tax credit. Those lucky European customers will be met with an electric car that likes to do things a little differently than others. The modest 35.5 kWh battery pack is good for just 124 miles on EuropeÂ’s optimistic WLTP testing cycle. It would surely achieve a much lower number in the EPA test. Mazda has made it front-wheel drive, placing a single motor on the front axle thatÂ’s good for 143 horsepower. We expect to see the first ones hit the streets in Europe this fall, but thereÂ’s one thing that makes us hold out hope for an American MX-30: the potential for a rotary range extender. Mazda said as much in its 100-year celebration letter: “Later, the company developed a prototype Mazda2 EV with a small single-rotor engine used as a range extender. A similar system could find its way onto the Mazda MX-30, a brand new battery electric crossover SUV arriving at dealerships this year." Assuming Mazda goes through with a rotary range extender, we could see this car coming to the American market. That would up the range considerably and make it a much more viable option for many customers, even if they might not need the added range on a daily basis.  Related video:

2020 Mazda MX-5 Miata RF Automatic Road Test | Cue the sad trombone

Somewhere in Hiroshima, a parade of nearly finished Miatas glides along a track waiting to receive their beating hearts, the powertrains that'll let them ply their road-carving talents the world over. One – let's call him Fred – is eager to begin his new life as a 2020 Mazda MX-5 Miata, bringing joy to his future owner and just generally being awesome, even if the RF power targa-ish roof that's already been applied to him is a tad dweeby. Visions of hairpins and power slides and expertly executed heal-toe downshifts dance in his head Â… and then it happens. He is given the one thing every new Miata dreads: an automatic transmission. Poor guy. This will not, entirely at least, be yet another diatribe in the ongoing Quixotic campaign to Save the Manuals(!). Automatic transmissions can be quite good and even beneficial in sports cars, especially on the track where removing the need to operate a clutch and expertly execute those heel-toe downshifts lets you better focus on the steering, what the chassis is doing and just going faster. That the computers can shift quicker than you can is another obvious advantage. The trouble with the Miata, and why Fred is now shuffling off the line like George Michael away from the Banana Stand, is that the Mazda six-speed automatic just isn't appropriate for a sports car. The automatics in the rest of Mazda's fleet are actually quite excellent, delivering superior response than rival transmissions, and delivering comparable fuel economy despite possessing fewer gears. However, what works well in a compact crossover like the CX-5 or CX-30 is not necessarily appropriate for a sports car like a Miata. Unlike the dual-clutch transmissions or even some sport-tuned conventional automatics of various performance-oriented cars, this one doesn't downshift adroitly when braking into a corner, anticipating your imminent need to get back on the power. The plastic paddle shifters lack the reassuring, mechanical feel of the best examples, and then don't produce quick-enough reactions from the transmission when up- or downshifting. I found using the shifter itself, which is at least oriented the correct way – with downshift forward and upshift rearward – to ultimately be more rewarding as it has a more involving action to it. Still, it's nothing compared to the solid, snick-snick action of the six-speed manual.

Junkyard Gem: 1992 Mazda MX-3

Back in the early 1990s, American car shoppers could choose from an extravaganza of sporty-looking front-wheel-drive coupes. The Geo Storm GSi may have offered the most performance per dollar, but the early Mazda MX-3 made a lot of sense as a reasonably fun commuter car. The MX-3, based on the 323/Protege chassis (and thus a close cousin to the Ford Escort of the same era) could be purchased in the United States for the 1992 through 1996 model years, and junkyard examples have become very hard to find. Here's a '92 in a Colorado Springs yard. MX-3 buyers could get a 1.8-liter V6 with 130 horsepower in 1992, but this is the SOHC 1.6-liter four with just 88 horses. Dual-overhead-cam versions of this engine went into the Miata and most members of the 323/Escort family. With an automatic transmission, you had a sedate, sensible commuter appliance that looked fairly sharp in the business-park lot. With the DOHC 1.6-liter engine (available for the last few years of MX-3 sales here), these cars were quick. In the early days of the 24 Hours of Lemons, a team with a pair of MX-3s dominated the Southern races for several years. They didn't have much power, but reliability and predictable handling wins endurance races. Not very close to the magical 200,000-mile mark. Another in my series of Junkyard Car With Pikes Peak photographs. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Such an adventurous car. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The small-displacement V6 was a big selling point in Japan. Related Video:

Mazda seeks $2.8 billion in loans to ride out pandemic

TOKYO — Mazda has sought loans totaling about 300 billion yen ($2.8 billion) from Japan's three megabanks and other lenders to ride out the coronavirus epidemic, a source with direct knowledge of the matter said on Saturday. The megabanks — Mitsubishi UFJ Financial Group, Sumitomo Mitsui Financial Group and Mizuho Financial Group — along with the Development Bank of Japan, Sumitomo Mitsui Trust Holdings and others are set to agree, with some already having extended the loans, the person said, declining to be identified because the information is not public. All three megabanks declined to comment on the loan request, which was reported by the Nikkei business daily earlier. Mazda did not immediately respond to a request for comment.    Mazda, like most other automakers, has reduced or halted production at factories around the world for the past few months as governments try to limit the spread of the new coronavirus.     Mazda's car sales and balance sheet had been weak even before the virus slammed the brakes on demand, with its interest-bearing debt of 650 billion yen far exceeding its cash and cash equivalents, according to the Nikkei.    Mazda is scheduled to announce its financial results for the year ended in March on Thursday. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2019 Mazda3 Press Conference In 15 Minutes

2020 Mazda MX-5 Miata Suspension Deep Dive

Full disclosure: I’m a longtime Miata fan. And by longtime I mean since mid-1989, the year I obtained, through a series of fortunate connections, one of the three original Chicago auto show display cars. But this was no blatant attempt to butter up a journalist – I barely knew how to spell the word. At the time I worked for the Department of Defense and was racing SCCA showroom stock on the side. It was destined to be a racecar. I was assured itÂ’d be quick, but doubts surfaced when I arrived at MazdaÂ’s dealer training center to pick it up. “Oh, itÂ’s that cute Elan-looking thing,” I probably said. But my mind was utterly changed when I eyeballed its double-wishbone suspension and other cleverly engineered features hiding beneath its skin. In subsequent years of racing – and eventually restoring – that car, I spent uncountable hours being impressed by it. I can safely say that the new ND Miata (2016 - present) is the best yet. ItÂ’s lighter than it has been in 20 years, and thatÂ’s some trick considering the relentless march of safety requirements and expected convenience features. This car is actually 1.3 inches shorter from nose to tail than my NA Miata, but itÂ’s also 2.4 inches wider and rolls on a wheelbase that is 1.7 inches longer. But it is the suspension that has always made the Miata great. This look under the skin of a 2020 Mazda MX-5 shows why the ND is the best Miata in that arena, too. The fact that this is an RF model doesnÂ’t much matter one way or the other.   As it was the first time I laid eyes on one, things got off to a promising start as soon as I pulled a wheel off. ItÂ’s clear that this is no mere strut suspension, as we can see a coil-over shock and glimpses of aluminum.   The apparent stars of the show are the A-shaped upper wishbone (green arrow) and the L-shaped lower wishbone (white). Miatas have used this layout from Day One, but aluminum didnÂ’t enter the picture until the NC generation.   For 2020, Bilstein monotube shocks (green) come on the Club and Grand Touring models with a manual transmission. This setup was part of the GT-S option package in 2019. The standard shocks are also monotubes, but theyÂ’re not Bilsteins and theyÂ’re tuned a bit softer. The upper control arm (yellow) is mounted low down such that its ball joint (white) resides within the barrel of the front wheel.

Mazda patent shows rotary placement in complex AWD hybrid layout

If we were playing alt-powertrain Bingo, a recent Mazda patent application filed in Japan would be one or two letters from victory. What's exciting about the patent, discovered by Japanese outlet T's Media via Motor Trend, is that while it makes a case for an internal combustion engine of any configuration, one of the drawings showing a rotary engine. The wild bit is that the whole powertrain comprises the ICE, a transaxle, two tiny in-wheel electric motors turning the front wheels, a third electric motor in the driveline, a capacitor, a lithium-ion battery, and three inverters. Motor Trend parsed the mechanics, and the way it reads, Doc Brown couldn't have done a better job. The rotary engine at the front turns the rear wheels, but not directly. Instead of a flywheel on back of the engine, the drawing shows a 25-kW electric motor and an inverter, then a driveshaft running to the transaxle. Along the axis of the transmission tunnel in a normal car, between the inverter and the transaxle, lies a 3.5-kWh battery running at 48 volts. MT writes that the electric motor can add its output to the ICE output to drive the rear wheels, or the e-motor can turn the rear axle on its own. Up front, two inverters and a double-layer capacitor join the ICE in the engine bay. The capacitor and tiny hub motors in the front wheels run at 120 volts, a higher voltage than the rest of the electrical system, so that the small in-wheel motors can generate the same torque as a larger motor running at a lower voltage. The AWD system acts on-demand. Given the signal, the capacitors discharge their energy to the wheel motors, and recover energy from braking. When the capacitors are at full charge, they send excess regen energy to the lithium-ion battery; conversely, the battery can recharge the capacitors when they're low and the front hub motors need power. The patent explains that the ICE works with the rear e-motor to drive the rear wheels at low speeds, the front motors called on to "generate an output only when a large output is required in the high vehicle speed range." The rather complicated system is focused on providing the benefits of a hybrid system and all-wheel drive, but at lower weight than one would expect. A rotary serves due to its compactness, but one of the drawings shows an engine with a V layout. Hub motors get dinged for adding unsprung weight, hence the small motors here.

Mazda helps coronavirus fight with free oil changes for all healthcare workers

During the hard times caused by the coronavirus pandemic, automakers are helping any way they can, big or small. Mazda is one of those offering support specifically for the nation's healthcare workers who are risking their own lives in order to save others. Mazda calls it the Essential Car Care Program (ECCP), and it offers free upkeep to any healthcare workers with a car, not just a Mazda. Through the ECCP,  Mazda is offering healthcare workers free oil changes and "enhanced cleaning services." The program begins April 16, 2020, and will run through select participating dealerships. To repeat, this is not only for people who drive Mazdas, it's for anybody working in healthcare. Mazda says it is "available for most makes and models from other manufacturers," excluding exotics, classic cars, off-road vehicles, and vehicles that take more than eight quarts of oil. The offer is available for service on one car per program period. The program, for which Mazda will donate a minimum of $5 million, was inspired by Mazda dealerships that independently offered similar perks to local healthcare workers. Those eligible for free services include anybody who works at the following facilities:   Hospitals, urgent care, surgical centers, birth centers Healthcare providers, doctor offices, medical clinics, medical offices, medical centers, medical facilities, health systems Mental health providers, addiction treatment centers Assisted living, long-term care facilities, nursing homes, hospice homes, adult care homes, home health agencies Public health agencies Medical laboratory and research centers Medical equipment providers Orthopedic and other rehabilitation centers including physical therapy and chiropractic Blood banks Telehealth providers All workers need to do is show proof of occupation, and they're in. In addition to the oil change, the enhanced vehicle cleaning will use EPA-approved cleansers on high-touch interior surfaces, as well as exterior surfaces.  The ECCP runs through May 4, 2020. Read full details on the ECCP fact sheet. Related Video:

Next-gen Mazda6 reportedly getting RWD, straight-six it shares with Toyota

Last June, Japan's Best Car magazine laid out what we considered a whopper series of rumors about future Mazda developments. The mag said it had been speaking to a Toyota source on an unrelated matter, and found out that Mazda's work on a straight-six Skyactiv engine was predicated on that engine's use in Toyota Group vehicles, including Lexus models. Car and Driver has apparently consulted its own sources, and in a new report utters many of the same pronouncements as Best Car. The next-generation Mazda6, due around 2022, will molt out of its transverse engines on a front-driver platform, and be the first home for the longitudinally-mounted straight-six on the automaker's new rear-wheel drive "Large Architecture."  The gas-powered Skyactiv-X six-cylinder, a shade under 3 liters of displacement, will get help from a 48-volt hybrid system, and top output could hit 350 horsepower. A second straight-six will come in an oil-burning Skyactiv-D flavor, and PHEVs are certain to eventually factor into the equations. The sheetmetal around the bodywork will draw inspiration from the four-door Mazda Vision Coupe concept that debuted at the 2017 Tokyo Motor Show. Describing a scenario we can only cross our fingers for, C/D writes "there's a chance Mazda will mimic Lexus and put inline-six into both four- and two-door bodies," grabbing another unused concept as a design guide for the latter, the two-door RX Vision concept from the 2015 Tokyo Motor Show. C/D suspects the increasing cooperation between Mazda and Toyota will not only pay the bills for Mazda's sports sedan, but compel the Large Architecture to take a couple of side jobs in Toyota City. C/D writes, "Toyota may adopt the six-cylinder Skyactiv-X for the next-generation Lexus IS and RC." According to the recently leaked dealer report, the next-gen IS could be with us in 2021 as a 2022MY offering. Betting money seems to be on the sedan sticking with Toyota's TNGA platform and Lexus engines until a brand new model shows around 2026, though.